I tried to get an hourly time announcement by configuring the following... [schedule27383] 81 = 0 * * * * However it does not seem to work? What else do I need to get this to work?
here is what i do in the functions 83=status,12 ;Give Time of Day (local only) [schedule27365] 83 = 00 * * * * 83 is better as it is local only On Wed, Nov 3, 2010 at 4:34 PM, Chuck Henderson < rpt2@chuck.midlandsnetworking.com> wrote:
I tried to get an hourly time announcement by configuring the following...
[schedule27383] 81 = 0 * * * *
However it does not seem to work?
What else do I need to get this to work?
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Randy Ballard KB3HJC <http://kb3hjc.net> (716) 204-6480
Unlike the last one you did where a function is called, What is on the left side of this has to be a macro like [macros] 7 = *81# Then [schedule27383] 7 = 0 * * * * Ken KE2N From: app_rpt-users-bounces@qrvc.com [mailto:app_rpt-users-bounces@qrvc.com] On Behalf Of Chuck Henderson Sent: Wednesday, November 03, 2010 4:35 PM To: app_rpt-users@qrvc.com Subject: [App_rpt-users] hourly time announcement? I tried to get an hourly time announcement by configuring the following... [schedule27383] 81 = 0 * * * * However it does not seem to work? What else do I need to get this to work?
Hi All, Are any of you using an MSF5000? If so has anyone done a comparison of internal radio vs DSP PL for encode and/or decode? Pete Sent from my iPhone On Nov 3, 2010, at 2:09 PM, "Ken" <ke2n@cs.com> wrote:
Unlike the last one you did where a function is called,
What is on the left side of this has to be a macro like
[macros]
7 = *81#
Then
[schedule27383]
7 = 0 * * * *
Ken
KE2N
From: app_rpt-users-bounces@qrvc.com [mailto:app_rpt-users-bounces@qrvc.com] On Behalf Of Chuck Henderson Sent: Wednesday, November 03, 2010 4:35 PM To: app_rpt-users@qrvc.com Subject: [App_rpt-users] hourly time announcement?
I tried to get an hourly time announcement by configuring the following...
[schedule27383]
81 = 0 * * * *
However it does not seem to work?
What else do I need to get this to work?
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
participants (4)
-
Chuck Henderson -
Ken -
Peter Elke -
Randy Ballard