I am attempting to run allstar on a raspberry pi 3 occasionally with wifi. I downloaded rpi2_dial_V101.img <http://dvswitch.org/files/DIAL/rpi2_dial_V101.img> but it appears to be based on some version of raspbian that doesn't have wifi support. So, I tried http://dvswitch.org/files/DIAL/RAT_RC1.tar.gz which I thought was a later development release but now I see it has an earlier date than "V101". However, wifi does work. I am having a couple of problems though. Sometimes after the transmitter returns to receive the receive audio is no longer present and the sound fob "mic" input appears to be dead. Worse, though, is when I try to get the node to announce something like status ( *712 = status,12 in rpt.conf) the transmitter starts transmitting but there is no audio. When it stops transmitting (maybe a minute or more later) I see a message " NOTICE[15291]: app_rpt.c:10859 rpt_telemetry: Tracepoint rpt_telemetry() exit chan_simpleusb ACRUK dev=usb TX OFF >>". So, I thought I would look at the source code and see what that might mean. Now I am confused about where to get the official source code. I think it is supposed to be at https://github.com/AllStarLink/DIAL so I started looking at the code there and have decided I might be way down the wrong rabbit hole. Time to reset. Should I go back to V101 or maybe download the source and attempt to build myself or... I saw this message on a resolved issue "feature/serial signaling for USB channel drivers #14" which sound interesting to me because then I could use the same radio interface I use for all my other applications. Any hints would be appreciated. Lowell
Lowell, RCI is newer. It is the release candidate. The official repository is at <https://github.com/allstarlink> The source is at https://github.com/AllStarLink/Asterisk> The master branch. 73, Steve N4IRS On 04/01/2017 03:37 AM, Lowell wrote:
I am attempting to run allstar on a raspberry pi 3 occasionally with wifi. I downloaded
rpi2_dial_V101.img <http://dvswitch.org/files/DIAL/rpi2_dial_V101.img>
but it appears to be based on some version of raspbian that doesn't have wifi support. So, I tried
http://dvswitch.org/files/DIAL/RAT_RC1.tar.gz which I thought was a later development release but now I see it has an earlier date than "V101". However, wifi does work.
I am having a couple of problems though. Sometimes after the transmitter returns to receive the receive audio is no longer present and the sound fob "mic" input appears to be dead.
Worse, though, is when I try to get the node to announce something like status ( *712 = status,12 in rpt.conf) the transmitter starts transmitting but there is no audio. When it stops transmitting (maybe a minute or more later) I see a message " NOTICE[15291]: app_rpt.c:10859 rpt_telemetry: Tracepoint rpt_telemetry() exit chan_simpleusb ACRUK dev=usb TX OFF >>". So, I thought I would look at the source code and see what that might mean. Now I am confused about where to get the official source code. I think it is supposed to be at https://github.com/AllStarLink/DIAL so I started looking at the code there and have decided I might be way down the wrong rabbit hole.
Time to reset. Should I go back to V101 or maybe download the source and attempt to build myself or...
I saw this message on a resolved issue "feature/serial signaling for USB channel drivers #14" which sound interesting to me because then I could use the same radio interface I use for all my other applications.
Any hints would be appreciated.
Lowell
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I just migrated to the RC1 version on a Raspberry PI2 (no wifi) and it works perfectly. Tested it on an RPI3 (with Wifi) and also worked great. Will keep testing it until the official RPI version is released. 73 de KP4TR. On 4/1/2017 5:09 AM, Steve Zingman wrote:
Lowell, RCI is newer. It is the release candidate. The official repository is at <https://github.com/allstarlink> The source is at https://github.com/AllStarLink/Asterisk> The master branch.
73, Steve N4IRS
On 04/01/2017 03:37 AM, Lowell wrote:
I am attempting to run allstar on a raspberry pi 3 occasionally with wifi. I downloaded
rpi2_dial_V101.img <http://dvswitch.org/files/DIAL/rpi2_dial_V101.img>
but it appears to be based on some version of raspbian that doesn't have wifi support. So, I tried
http://dvswitch.org/files/DIAL/RAT_RC1.tar.gz which I thought was a later development release but now I see it has an earlier date than "V101". However, wifi does work.
I am having a couple of problems though. Sometimes after the transmitter returns to receive the receive audio is no longer present and the sound fob "mic" input appears to be dead.
Worse, though, is when I try to get the node to announce something like status ( *712 = status,12 in rpt.conf) the transmitter starts transmitting but there is no audio. When it stops transmitting (maybe a minute or more later) I see a message " NOTICE[15291]: app_rpt.c:10859 rpt_telemetry: Tracepoint rpt_telemetry() exit chan_simpleusb ACRUK dev=usb TX OFF >>". So, I thought I would look at the source code and see what that might mean. Now I am confused about where to get the official source code. I think it is supposed to be at https://github.com/AllStarLink/DIAL so I started looking at the code there and have decided I might be way down the wrong rabbit hole.
Time to reset. Should I go back to V101 or maybe download the source and attempt to build myself or...
I saw this message on a resolved issue "feature/serial signaling for USB channel drivers #14" which sound interesting to me because then I could use the same radio interface I use for all my other applications.
Any hints would be appreciated.
Lowell
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
(KP4TR)Ramon Gonzalez -
Lowell -
Steve Zingman