Here's a note I wrote on this subject a while back: The RTCM is totally flexible regarding emphasis. Although the way it is set is completely obscure. It tries to automatically do the right thing for you, which is great most of the time. But when it’s not it's hard to know what is going on. On the TX side the RTCM expects the repeater to accept mic audio. In other words, the repeater is providing the pre-empahais, not the RTCM. This can overridden by setting CTCSS on in voter.conf in which case the RTCM will provide pre-emphasis. If you don’t want TX CTCSS but do need pre-emphasis set the level to 1 which is low enough that it won’t be there. On the RX side the COR Type setting determine the emphasis. 0=Normal means the RTCM squelch circuit is in use and expects discriminator audio, therefore will provide de-emphasis. 1=IGNORE COR uses the CTCSS input for COR (+CTSCC) and expects line audio, therefore will not provide de-emphasis. On Sun, Apr 2, 2017 at 1:19 PM, Kevin Custer <kuggie@kuggie.com> wrote:

The notes in this document may help you: http://www.masterscommunications.com/products/radio-adapter/txt/tkr.txt

Kevin

On 4/2/2017 2:26 PM, Bradlington wrote:

...

Hi I am a custodian for our local clubs repeater and have just installed the Allstar unit .

Can you please confirm if emphasis settings can be done on the RTCM module for both RX and TX audio chains from and to the Repeater.

TKR-750 External accessory as duplex unit .

Audio appears to sharp and not enough lows - I am suspecting it is being double emphasised somewhere in the RTCM.

There is one setting on the RTCM unit known as "nodeemp"--anyone got more technical details on how these units are designed and what type of audio the unit is expecting ? Regards

Bradley Glen

ZS5BG

South Africa

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- -- Tim