tried to download XIPAR showing site is down? On Tue, Jul 1, 2014 at 11:00 AM, <app_rpt-users-request@ohnosec.org> wrote:

Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org

You can reach the person managing the list at app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

Today's Topics:

1. Re: QUESTION on making a receive only node (REDBUTTON_CTRL)

----------------------------------------------------------------------

Message: 1 Date: Tue, 01 Jul 2014 11:17:31 -0400 From: REDBUTTON_CTRL <jrorke@cogeco.ca> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] QUESTION on making a receive only node Message-ID: <53B2D10B.8060309@cogeco.ca> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"

If you can get discriminator audio out of your radio then you should be able to use that on an unmodified dongle. That way you can have the RX node do the tone decoding and squelch.

Not familiar with the Yaesu 2600 but if it has a packet connector you should find discriminator audio there. Might have to put theradio in 9600 baud mode to getthe right stuff on the connector. If not then you might want to look at at some other radios where you can get discriminator audio out.

Jon VA3RQ

...

Agreed 100%!! 73 Jim W7RY *From:* George Csahanin <mailto:george@dyb.com> *Sent:* Sunday, June 29, 2014 9:23 PM *To:* Tim Sawyer <mailto:tim.sawyer@mac.com> ; Bradley Haney <mailto:hammin75@gmail.com> *Cc:* app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node Not just level but speaker audio (should) has filtered audio and PL won't be there...speaker audio = bad audio.(Editorial comment: this is one way Echolink gets to sound Soooooooo bad) George J Csahanin W2DB Cedar Park, TX 2360 *From:* Tim Sawyer <mailto:tim.sawyer@mac.com> *Sent:* Sunday, June 29, 2014 10:29 PM *To:* Bradley Haney <mailto:hammin75@gmail.com> *Cc:* app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node Nope, the USB dongle MIC input only needs a few hundred millivolts. Speaker is way more that that. What are you intending to sue for the receiver? Perhaps someone on this list will be familiar with your radio and can suggest a better place to get audio. -- Tim :wq On Jun 29, 2014, at 8:12 PM, Bradley Haney <hammin75@gmail.com <mailto:hammin75@gmail.com>> wrote:

...

Hello all we would like to extend our repeater receive area by putting in a receive site but with a different PL tone . we have an area that we lose HT coverage but can hear it fine from the main tx of the repeater site. . Could i just buy a USB FOB CM108 and not mod it and just plug in the speaker from the radio into the Mic of the dongle? Thanks for your help _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to

On 6/30/2014 12:42 AM, Jim W7RY wrote: the list detailing the problem.