I have a mastr ii repeater. I'd like to use app-rpt as the controller for the repeater. I'd like to be able to run echolink off the repeater. I also have a URI interface. I'd also like to after one repeater is on the air and available on echolink be able to do the same thing to another repeater to make a linked network via IP My questions are can echolink and app_rpt be run at the same time? At the same time providing repeater control and echolink service. Has anyone had any success using a raspberry pi with app_rpt and a URI? I have a laptop I could use, but the pi is an attractive solution. I'd also like to add I'm new to linux. I'm OK on computers and networking I also work in land mobile radio so the RF end of it I'm good. Apparare Scientior Paratus Communicare -N1XBM
app_rpt has echolink built into it. See http://ohnosec.org/drupal/node/56 -- Tim :wq On Sep 11, 2013, at 12:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I have a mastr ii repeater. I'd like to use app-rpt as the controller for the repeater. I'd like to be able to run echolink off the repeater. I also have a URI interface. I'd also like to after one repeater is on the air and available on echolink be able to do the same thing to another repeater to make a linked network via IP
My questions are can echolink and app_rpt be run at the same time? At the same time providing repeater control and echolink service.
Has anyone had any success using a raspberry pi with app_rpt and a URI? I have a laptop I could use, but the pi is an attractive solution.
I'd also like to add I'm new to linux. I'm OK on computers and networking I also work in land mobile radio so the RF end of it I'm good.
Apparare Scientior Paratus Communicare -N1XBM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
OK so echolink...check! What about using raspberry pi? I have a laptop I can dedicate, but the pi looks appealing. Apparare Scientior Paratus Communicare -N1XBM On Sep 12, 2013 12:37 AM, "Tim Sawyer" <tim.sawyer@me.com> wrote:
app_rpt has echolink built into it. See http://ohnosec.org/drupal/node/56 -- Tim :wq
On Sep 11, 2013, at 12:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I have a mastr ii repeater. I'd like to use app-rpt as the controller for the repeater. I'd like to be able to run echolink off the repeater. I also have a URI interface. I'd also like to after one repeater is on the air and available on echolink be able to do the same thing to another repeater to make a linked network via IP
My questions are can echolink and app_rpt be run at the same time? At the same time providing repeater control and echolink service.
Has anyone had any success using a raspberry pi with app_rpt and a URI? I have a laptop I could use, but the pi is an attractive solution.
I'd also like to add I'm new to linux. I'm OK on computers and networking I also work in land mobile radio so the RF end of it I'm good.
Apparare Scientior Paratus Communicare -N1XBM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
popping the popcorn and sitting back...lol. -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings... On Sep 12, 2013, at 15:50, Robert Newberry <N1XBM@amsat.org> wrote:
OK so echolink...check!
What about using raspberry pi? I have a laptop I can dedicate, but the pi looks appealing.
Apparare Scientior Paratus Communicare -N1XBM
On Sep 12, 2013 12:37 AM, "Tim Sawyer" <tim.sawyer@me.com> wrote:
app_rpt has echolink built into it. See http://ohnosec.org/drupal/node/56 -- Tim :wq
On Sep 11, 2013, at 12:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I have a mastr ii repeater. I'd like to use app-rpt as the controller for the repeater. I'd like to be able to run echolink off the repeater. I also have a URI interface. I'd also like to after one repeater is on the air and available on echolink be able to do the same thing to another repeater to make a linked network via IP
My questions are can echolink and app_rpt be run at the same time? At the same time providing repeater control and echolink service.
Has anyone had any success using a raspberry pi with app_rpt and a URI? I have a laptop I could use, but the pi is an attractive solution.
I'd also like to add I'm new to linux. I'm OK on computers and networking I also work in land mobile radio so the RF end of it I'm good.
Apparare Scientior Paratus Communicare -N1XBM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
OK thanks, from more research it looks like people are using other types of software with raspberry pi such as "thelinkbox". Apparare Scientior Paratus Communicare -N1XBM
Better luck next time :-) -- Tim :wq On Sep 12, 2013, at 4:05 PM, Bryan D. Boyle <bdboyle@bdboyle.com> wrote:
On 9/12/2013 5:44 PM, Tim Sawyer wrote:
In a word, no. --
Darn..didn't even finish the bag of Redenbacker's...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Bryan D. Boyle -
Robert Newberry -
Tim Sawyer