Re: [App_rpt-users] Distorted audio in app_rpt/Allstar
In rpt. conf, somewhere near the top just under your node number. Simpleusb doesn't utilize as many resources, its my understanding, as usbradio. -Geoff/w5omr Andreas Pleschutznig <andy@ple.org> wrote:
Good question. How do I find out?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 6:21 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
Which channel driver (chan_?) are you using?
/etc/asterisk/rpt.conf — ; Radio Repeater configuration file (for use with app_rpt) ; [29886] ; Change this to your assigned node number rxchannel=Radio/usb29886 duplex=2 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule29886 morse=morse29886 macro=macro29886 functions=functions phone_functions=functions link_functions=functions telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iWQRM312 accountcode=RADIO hangtime=0 ; squelch tail hang time (in ms) (optional) althangtime=0 ; alternate squelch tail totime=170000 idtime=0 politeid=3000 idtalkover=|iWQRM312 unlinkedct=ct1 ; unlinked courtesy tone (optional) default is none ;remotect=ct3 linkunkeyct=ct1 ; courtesy tone sent on link unkey nolocallinkct=0 ; Send unlinkedct instead of linkedct if another local node is connected to this node (hosted on the same PC) nounkeyct=0 ; Set to a 1 to eliminate courtesy tones and associated delays. ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects ;connpgm=yourconnectprogram ; Default: Disabled. Execute a program you specify on connect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being connected to us (them) ;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you specify on disconnect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being disconnected from us (them) ;lnkactenable=0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only. ;lnkacttime=1800 ; Link activity timer time in seconds. ;lnkactmacro=*52 ; Function to execute when link activity timer expires. ;lnkacttimerwarn=30seconds ; Message to play when the link activity timer has 30 seconds left. ;remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable). ;remote_timeout=3600 ; Session time out for remote base. (set to 0 to disable) ;holdofftelem=0 beaconing=0 — That what you asked? -- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823 On Sep 11, 2013, at 7:22 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
In rpt. conf, somewhere near the top just under your node number.
Simpleusb doesn't utilize as many resources, its my understanding, as usbradio.
-Geoff/w5omr
Andreas Pleschutznig <andy@ple.org> wrote:
Good question. How do I find out?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 6:21 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
Which channel driver (chan_?) are you using?
That's USBradio which has the DSP stuff in it. If you can get COR and CTCSS detect out of your radio you are better off switching to simpleUSB. See http://ohnosec.org/drupal/node/193 -- Tim :wq On Sep 11, 2013, at 5:49 PM, Andreas Pleschutznig <andy@ple.org> wrote:
/etc/asterisk/rpt.conf — ; Radio Repeater configuration file (for use with app_rpt) ;
[29886] ; Change this to your assigned node number
rxchannel=Radio/usb29886 duplex=2 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule29886 morse=morse29886 macro=macro29886 functions=functions phone_functions=functions link_functions=functions telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iWQRM312 accountcode=RADIO hangtime=0 ; squelch tail hang time (in ms) (optional) althangtime=0 ; alternate squelch tail totime=170000 idtime=0 politeid=3000
idtalkover=|iWQRM312 unlinkedct=ct1 ; unlinked courtesy tone (optional) default is none ;remotect=ct3 linkunkeyct=ct1 ; courtesy tone sent on link unkey nolocallinkct=0 ; Send unlinkedct instead of linkedct if another local node is connected to this node (hosted on the same PC) nounkeyct=0 ; Set to a 1 to eliminate courtesy tones and associated delays. ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects ;connpgm=yourconnectprogram ; Default: Disabled. Execute a program you specify on connect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being connected to us (them) ;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you specify on disconnect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being disconnected from us (them) ;lnkactenable=0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only. ;lnkacttime=1800 ; Link activity timer time in seconds. ;lnkactmacro=*52 ; Function to execute when link activity timer expires. ;lnkacttimerwarn=30seconds ; Message to play when the link activity timer has 30 seconds left. ;remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable). ;remote_timeout=3600 ; Session time out for remote base. (set to 0 to disable) ;holdofftelem=0 beaconing=0 —
That what you asked?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 7:22 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
In rpt. conf, somewhere near the top just under your node number.
Simpleusb doesn't utilize as many resources, its my understanding, as usbradio.
-Geoff/w5omr
Andreas Pleschutznig <andy@ple.org> wrote:
Good question. How do I find out?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 6:21 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
Which channel driver (chan_?) are you using?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
just a thought. Maybe a line in drupal node 193 that warns that depending on the PC's USB handling the DSP may or may not work well. I know originally I figured that the "word' was 'better than 1200 mhz' CPU so the D201 and D945 boards would be fine, but because of this USB issue it isn't, not a big deal because I just extracted COS and PTT from the radio. But I will say that some of it may be the kernel's handling of things. Now I'm way above my pay grade here, but I did connect same USB fob to the same PC running Winders XP. Played steady tone out and it was fine and pure with no interruptions. Boot back to ACID (Limey does it too) and play out a tone (radio tune txvoice) and it had the interruptions. Maybe modifying the kernel options? I recall there being different options for various chipsets and so on, and USB is in there too... Back to my cave in Jersey... GeorgeC W2DB -----Original Message----- From: Tim Sawyer Sent: Wednesday, September 11, 2013 11:48 PM To: app_rpt-users@ohnosec.org list Subject: Re: [App_rpt-users] Distorted audio in app_rpt/Allstar That's USBradio which has the DSP stuff in it. If you can get COR and CTCSS detect out of your radio you are better off switching to simpleUSB. See http://ohnosec.org/drupal/node/193 -- Tim :wq On Sep 11, 2013, at 5:49 PM, Andreas Pleschutznig <andy@ple.org> wrote:
/etc/asterisk/rpt.conf — ; Radio Repeater configuration file (for use with app_rpt) ;
[29886] ; Change this to your assigned node number
rxchannel=Radio/usb29886 duplex=2 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule29886 morse=morse29886 macro=macro29886 functions=functions phone_functions=functions link_functions=functions telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iWQRM312 accountcode=RADIO hangtime=0 ; squelch tail hang time (in ms) (optional) althangtime=0 ; alternate squelch tail totime=170000 idtime=0 politeid=3000
idtalkover=|iWQRM312 unlinkedct=ct1 ; unlinked courtesy tone (optional) default is none ;remotect=ct3 linkunkeyct=ct1 ; courtesy tone sent on link unkey nolocallinkct=0 ; Send unlinkedct instead of linkedct if another local node is connected to this node (hosted on the same PC) nounkeyct=0 ; Set to a 1 to eliminate courtesy tones and associated delays. ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects ;connpgm=yourconnectprogram ; Default: Disabled. Execute a program you specify on connect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being connected to us (them) ;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you specify on disconnect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being disconnected from us (them) ;lnkactenable=0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only. ;lnkacttime=1800 ; Link activity timer time in seconds. ;lnkactmacro=*52 ; Function to execute when link activity timer expires. ;lnkacttimerwarn=30seconds ; Message to play when the link activity timer has 30 seconds left. ;remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable). ;remote_timeout=3600 ; Session time out for remote base. (set to 0 to disable) ;holdofftelem=0 beaconing=0 —
That what you asked?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 7:22 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
In rpt. conf, somewhere near the top just under your node number.
Simpleusb doesn't utilize as many resources, its my understanding, as usbradio.
-Geoff/w5omr
Andreas Pleschutznig <andy@ple.org> wrote:
Good question. How do I find out?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 6:21 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
Which channel driver (chan_?) are you using?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I just noticed this...
when it does that the system is at less than 35% CPU and still has about 3GB of RAM open (this is on a 4GB system)
so I checked my atom d510mo system and it seems to always be at 1% CPU or less. So why is yours running 35%? You must have something other than the normal ACID install running to have it that high with a dual core 2+GHZ cpu. On Thu, Sep 12, 2013 at 9:25 AM, George Csahanin <george@dyb.com> wrote:
just a thought. Maybe a line in drupal node 193 that warns that depending on the PC's USB handling the DSP may or may not work well. I know originally I figured that the "word' was 'better than 1200 mhz' CPU so the D201 and D945 boards would be fine, but because of this USB issue it isn't, not a big deal because I just extracted COS and PTT from the radio.
But I will say that some of it may be the kernel's handling of things. Now I'm way above my pay grade here, but I did connect same USB fob to the same PC running Winders XP. Played steady tone out and it was fine and pure with no interruptions. Boot back to ACID (Limey does it too) and play out a tone (radio tune txvoice) and it had the interruptions. Maybe modifying the kernel options? I recall there being different options for various chipsets and so on, and USB is in there too...
Back to my cave in Jersey...
GeorgeC W2DB
-----Original Message----- From: Tim Sawyer Sent: Wednesday, September 11, 2013 11:48 PM To: app_rpt-users@ohnosec.org list
Subject: Re: [App_rpt-users] Distorted audio in app_rpt/Allstar
That's USBradio which has the DSP stuff in it. If you can get COR and CTCSS detect out of your radio you are better off switching to simpleUSB. See http://ohnosec.org/drupal/node/193 -- Tim :wq
On Sep 11, 2013, at 5:49 PM, Andreas Pleschutznig <andy@ple.org> wrote:
/etc/asterisk/rpt.conf — ; Radio Repeater configuration file (for use with app_rpt) ;
[29886] ; Change this to your assigned node number
rxchannel=Radio/usb29886 duplex=2 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule29886 morse=morse29886 macro=macro29886 functions=functions phone_functions=functions link_functions=functions telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iWQRM312 accountcode=RADIO hangtime=0 ; squelch tail hang time (in ms) (optional) althangtime=0 ; alternate squelch tail totime=170000 idtime=0 politeid=3000
idtalkover=|iWQRM312 unlinkedct=ct1 ; unlinked courtesy tone (optional) default is none ;remotect=ct3 linkunkeyct=ct1 ; courtesy tone sent on link unkey nolocallinkct=0 ; Send unlinkedct instead of linkedct if another local node is connected to this node (hosted on the same PC) nounkeyct=0 ; Set to a 1 to eliminate courtesy tones and associated delays. ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects ;connpgm=yourconnectprogram ; Default: Disabled. Execute a program you specify on connect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being connected to us (them) ;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you specify on disconnect. ; passes 2 command line arguments to your program: ; 1. node number in this stanza (us) ; 2. node number being disconnected from us (them) ;lnkactenable=0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only. ;lnkacttime=1800 ; Link activity timer time in seconds. ;lnkactmacro=*52 ; Function to execute when link activity timer expires. ;lnkacttimerwarn=30seconds ; Message to play when the link activity timer has 30 seconds left. ;remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable). ;remote_timeout=3600 ; Session time out for remote base. (set to 0 to disable) ;holdofftelem=0 beaconing=0 —
That what you asked?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 7:22 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
In rpt. conf, somewhere near the top just under your node number.
Simpleusb doesn't utilize as many resources, its my understanding, as usbradio.
-Geoff/w5omr
Andreas Pleschutznig <andy@ple.org> wrote:
Good question. How do I find out?
-- Andreas Pleschutznig, Cell: (832) 633-7817, Sent: MacBook KA5PLE, Allstar: 29841, Echolonk: 884823
On Sep 11, 2013, at 6:21 PM, Geoff Edmonson <ars.w5omr@gmail.com> wrote:
Which channel driver (chan_?) are you using?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Andreas Pleschutznig -
Chuck Henderson -
Geoff Edmonson -
George Csahanin -
Tim Sawyer