So... I've been researching several options, finally downloaded the asterisk-addons, and installed. The mp3 download of the ARRL News plays, however, I'd >like to have the idtalkover=|i<call sign> function as well. I get the Morse Code id at the end of the ARRL News, but not during at the defined interval. Any ideas?

Thanks, Bob kk6ecm ===== OK - I have reported hearing the talkover ID and other people say they don't hear it. It turns out everybody is right. After some experimenting, I found that the node that is playing does not talk-over, but all the connected nodes do (and that is where I often listen).

That suggests that you could have an internal (no radio) node that did the playback and link it to the radio node(s). In that case you should hear the talk-over ID on all the connected radios. I do not know if the bulletin node needs to be on a separate PC, but I believe not. The bulletin playback node has no URI and uses: rxchannel = Zap/pseudo ; Rx audio/signalling channel Of course, the other ways to do it (previous postings) are: 1) Split the MP3 into segments and play them in sequence, using a Linux script, with whatever ID you want between the segments 2) Edit the audio file and insert the ID audio into the track itself (what I do) 73/GL Ken