You might be able to do something with the event management system. Please read this http://ohnosec.org/drupal/node/176 -- Tim :wq On Jul 26, 2013, at 7:44 PM, Matthew Pitts <daywalker_blade_2004@yahoo.com> wrote:

In essence, what you want is to allow PL for normal operation, but have repeater ID an "random announcements" not have it, so users only hear actual repeater activity if they have a receive PL tone set, correct?

Matthew Pitts N8OHU

From: Robert Garcia <robert@n5qm.com> To: Tim Sawyer <tim.sawyer@me.com> Cc: APP_RPT <app_rpt-users@ohnosec.org> Sent: Friday, July 26, 2013 10:25 PM Subject: Re: [App_rpt-users] PL Encode Disable

Tim,

My goal is to not have IDs encoded with a PL tone.

I need to trigger an output pin on the URI to do so using SimpleUSB to tell the repeater not to send a PL with the current audio.

I hope that is a better explanation.

Robert N5QM

On Friday, July 26, 2013, Tim Sawyer wrote: IDs and system messages can be disabled with configuration setting in rpt.conf. But, from your email, it's not clear what you want to do. -- Tim :wq

On Jul 26, 2013, at 4:12 PM, Robert Garcia <robert@n5qm.com> wrote:

...

All,

I have sifted through the documentation, but I haven't been able to find much that directly relates to this.

When using simpleusb as an interface, can you setup one of the I/Os to trigger a PL enable or disable input on a radio? The goal would be to disable IDs and system messages from being encoded as is normally configured on external controllers.

Robert N5QM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users