holdofftelem = 0 ; Hold off all telemetry when signal is present on receiver or from connected nodes ; except when an ID needs to be done and there is a signal coming from a connected node. telemdefault = 1 ; 0 = telemetry output off ; 1 = telemetry output on (default = 1) ; 2 = timed telemetry output on command execution and for a short time thereafter. telemdynamic = 1 ; 0 = disallow users to change the local telemetry setting with a COP command, ; 1 = Allow users to change the setting with a COP command. (default = 1) On 8/15/2016 1:55 PM, n0km@arrl.net wrote:

Hello,

I've been searching through my email archive and the Asterisk documentation for help in changing my node configuration so it doesn't announce all of the remote node connect / disconnect messages over my node.

If I read things correctly, the change should be made in rpt.conf with Telemdefault=1 and changed to =2. For some reason I do not find this line in my rpt.conf file.

I am using Dial with Debian, although I plan to move to a Raspberry Pi 3 before long.

Thanks!

Dave

--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- "Just say no to world domination" s by Avast antivirus software. <br> https://www.avast.com/antivirus <br> <br> <br> _______________________________________________ <br> App_rpt-users mailing list <br> App_rpt-users@ohnosec.org <br> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <br> <br> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" <br> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </blockquote> <br> <pre class="moz-signature" cols="72">-- "Just say no to world domination" </pre> </body> </html>