Simplex node - prevent tx while local traffic is going on...
Hello, Does anyone know a/the setting to prevent TX while a local station is transmitting - example between network traffic, being able to key up and enter a command without being walked on, assuming one gets into the node before the remote station transmits of course. Tried changing usbradio.conf duplex = 0 did not help - rpt.conf is set to duplex = 1 Thanks, Mark KC7DMF
I really don’t like to be walked on... 73 Jim W7RY From: Mark Johnston Sent: Friday, February 20, 2015 7:22 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Simplex node - prevent tx while local traffic isgoing on... Hello, Does anyone know a/the setting to prevent TX while a local station is transmitting - example between network traffic, being able to key up and enter a command without being walked on, assuming one gets into the node before the remote station transmits of course. Tried changing usbradio.conf duplex = 0 did not help - rpt.conf is set to duplex = 1 Thanks, Mark KC7DMF -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Duplex=1 in rpt.conf is supposed to do that what you want. That is, with a simplex node a signal from another node will not key the local node if there is a signal on it's receiver. On the other hand a remote base is supposed to give TX priority to the linked node. So a signal from the other node will key the local node even when there is a signal on it’s receiver. You don’t have the remote base mode set by chance, do you? -- Tim :wq
On Feb 20, 2015, at 7:22 PM, Mark Johnston <markjohnston73@gmail.com> wrote:
Hello,
Does anyone know a/the setting to prevent TX while a local station is transmitting - example between network traffic, being able to key up and enter a command without being walked on, assuming one gets into the node before the remote station transmits of course.
Tried changing usbradio.conf duplex = 0 did not help -
rpt.conf is set to duplex = 1
Thanks,
Mark KC7DMF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Make sure linktolink=yes is not active. I have linktolink=yes on my node because it is half duplex. The only disadvantage is that people will get walked on. On Fri, Feb 20, 2015 at 10:41 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:
Duplex=1 in rpt.conf is supposed to do that what you want. That is, with a simplex node a signal from another node will not key the local node if there is a signal on it's receiver.
On the other hand a remote base is supposed to give TX priority to the linked node. So a signal from the other node will key the local node even when there is a signal on it’s receiver.
You don’t have the remote base mode set by chance, do you? -- Tim :wq
On Feb 20, 2015, at 7:22 PM, Mark Johnston <markjohnston73@gmail.com> wrote:
Hello,
Does anyone know a/the setting to prevent TX while a local station is transmitting - example between network traffic, being able to key up and enter a command without being walked on, assuming one gets into the node before the remote station transmits of course.
Tried changing usbradio.conf duplex = 0 did not help -
rpt.conf is set to duplex = 1
Thanks,
Mark KC7DMF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
participants (4)
-
Jim -
Mark Johnston -
Skyler F -
Tim Sawyer