Dear. I have a ACID succesfully installed with URI connected to Motorola GM300 I cannot connect my local node (1999) to my ACID server. If i run: test*CLI> radio tune rxnoise tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=7336 tries=1, setting=7, meas=17695 tries=2, setting=11, meas=26213 tries=3, setting=11, meas=25994 tries=4, setting=11, meas=26186 tries=5, setting=11, meas=26213 tries=6, setting=11, meas=26186 DONE tries=6, setting=688, meas=26186, sqnoise=0 INFO: RX INPUT ADJUST SUCCESS. test*CLI> radio tune rxvoice INFO: RX VOICE ADJUST START. target=7200 tolerance=360 tries=0, setting=1.000000, meas=27537 tries=1, setting=0.261466, meas=7468 tries=2, setting=0.252083, meas=7586 tries=3, setting=0.239256, meas=7164 tries=4, setting=0.239256, meas=6969 tries=5, setting=0.239256, meas=6558 tries=6, setting=0.262679, meas=6628 tries=7, setting=0.285348, meas=8243 tries=8, setting=0.249242, meas=7582 tries=9, setting=0.236685, meas=6607 tries=10, setting=0.257928, meas=7100 DONE tries=10, setting=0.257928, meas=7100.000000 INFO: RX VOICE GAIN ADJUST SUCCESS. test*CLI> radio tune rxtone INFO: RX CTCSS ADJUST START. target=2400 tolerance=100 tries=0, setting=1.000000, meas=6244 tries=1, setting=0.384369, meas=2587 tries=2, setting=0.356585, meas=2628 tries=3, setting=0.325648, meas=1980 tries=4, setting=0.394725, meas=2555 tries=5, setting=0.370779, meas=2191 tries=6, setting=0.406148, meas=2456 DONE tries=6, setting=0.406148, meas=2456.00 INFO: RX CTCSS GAIN ADJUST SUCCESS. But when i run: test*CLI> rpt nodes 1999 test*CLI> ************************* CONNECTED NODES ************************* <NONE>LI> test*CLI> Any idea what i am doing wrong or how i can solve this issue? Regards