Hello, How do you adjust the audio levels on the node only. In the irlp world I use "Aumix". What do I use in the App_rpt world. Repeater using 2 gm300 and DMK Urix. Sal N6SPD Node 28365
Follow this link. https://allstarlink.org/usbradio.html David On Tue, Feb 28, 2012 at 8:15 AM, Sal P. De Franco <sal@spdavanti.com> wrote:
Hello,
How do you adjust the audio levels on the node only. In the irlp world I use "Aumix". What do I use in the App_rpt world.
Repeater using 2 gm300 and DMK Urix.
Sal N6SPD Node 28365 ______________________________**_________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/**mailman/listinfo/app_rpt-users<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
Setting of levels is covered here : http://ohnosec.org/drupal/node/48 (from a Google search) Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes"
I have a need to call a shell script from a DTMF function. An internet search finds this message in the archive : Calling a script message So based on what I found there I did this: Added to extensions.conf: [call-bash-script] exten => 1,1,System(/etc/W3SBA/utils/drillactive) ; Configure for EmComm Drill And in rpt.conf: 8495=autopatchup,context=call-bash-script,farenddisconnect=1 ;84951 - Set up for EmComm Drill It works as is. But, is this still the way to do this? Or is there a "better" way to make a call to the system? Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes"
On 2/28/12 1:47 PM, Robert A. Poff WB3AWJ wrote:
I have a need to call a shell script from a DTMF function.
An internet search finds this message in the archive : Calling a script message So based on what I found there I did this:
Added to extensions.conf: [call-bash-script] exten => 1,1,System(/etc/W3SBA/utils/drillactive) ; Configure for EmComm Drill
And in rpt.conf: 8495=autopatchup,context=call-bash-script,farenddisconnect=1 ;84951 - Set up for EmComm Drill It works as is. But, is this still the way to do this? Or is there a "better" way to make a call to the system?
What are you trying to do? I don't usually add anything to extensions.conf; just a dtmf command in rpt.conf that calls a script using DTMF=cmd,/etc/asterisk/scripts/blah.sh where blah.sh may be something as simple as #!/bin/bash /usr/sbin/asterisk -rx "rpt cmd xxxxx ilink 1 yyyyy" so...keying up and doing a *DTMF# sequence will call my blah.sh script, execute it, and do what it says (in this case, send a command to xxxxx to disconnect node yyyyy. Of course, you have to watch for command length matching... 99=cmd,/x/y/huh.sh 991=cmd,/a/b/c.sh will never get executed, since there will be a match on 99 and huh.sh will get executed when the minimal match is made... better to have 990...;) Found that the hard way. I know there are other ways...but, this seems to work the least painfully at least for me so far. -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.
Has anyone tried to interface a ID-880H to a URI i'm using the PS2 plug on the back of the radio and every works but when the URI tells the radio to TX the radio just Beeps, in the DV mode Anyone have any ideas? 73 - Tony NN1D
On 12/11/2012 5:55 PM, radioman wrote:
Has anyone tried to interface a ID-880H to a URI
i'm using the PS2 plug on the back of the radio and every works but when the URI tells the radio to TX the radio just Beeps, in the DV mode
Anyone have any ideas?
<-- Hi Tony; Why would you have your 880H in DV mode? - shouldn't it be in FM mode? - presumably you're trying to setup some kind of hotspot since you're using a URI? If this is the case, your 880 should be in FM mode. BTW - I wouldn't use an 880 or any other D-STAR radio for the hotspot radio - way too much of a radio for that.... use an el-cheapo FM (TRUE FM) radio. Cheers, Ramesh. www.freestar.us
Hi Ramesh, Hows it going? I think the OP may be trying to use DStar modulation (DV) with a URI. If that's the case, the OP will find the 6 pin DIN interface on the back of the radio will not suffice, as I believe that's for a TNC which would only operate under FM mode, thus the beeping response. The OP is welcome to correct me, but if this is indeed what you'd like to do, you can't do it with an Icom radio, you'll need to build a modem. Look for "homebrew DStar radios" on Google. Ta! Shane. On 13/11/2012 10:05 AM, "Ramesh Dhami (VA3UV)" <Ramesh@va3uv.com> wrote:
On 12/11/2012 5:55 PM, radioman wrote:
Has anyone tried to interface a ID-880H to a URI
i'm using the PS2 plug on the back of the radio and every works but when the URI tells the radio to TX the radio just Beeps, in the DV mode
Anyone have any ideas?
<-- Hi Tony; Why would you have your 880H in DV mode? - shouldn't it be in FM mode? - presumably you're trying to setup some kind of hotspot since you're using a URI?
If this is the case, your 880 should be in FM mode. BTW - I wouldn't use an 880 or any other D-STAR radio for the hotspot radio - way too much of a radio for that.... use an el-cheapo FM (TRUE FM) radio.
Cheers,
Ramesh.
www.freestar.us
______________________________**_________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/**mailman/listinfo/app_rpt-users<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
Hi Ramesh, nice to chat, actually my second asterisk node 28389 would let the local guys that don't have DStar get in from the analog side that was the idea the 880 is just a trial run, but it don't TX from the data (ps2) plug in DV 73 - Tony NN1D On 11/12/2012 6:05 PM, Ramesh Dhami (VA3UV) wrote:
On 12/11/2012 5:55 PM, radioman wrote:
Has anyone tried to interface a ID-880H to a URI
i'm using the PS2 plug on the back of the radio and every works but when the URI tells the radio to TX the radio just Beeps, in the DV mode
Anyone have any ideas?
<-- Hi Tony; Why would you have your 880H in DV mode? - shouldn't it be in FM mode? - presumably you're trying to setup some kind of hotspot since you're using a URI?
If this is the case, your 880 should be in FM mode. BTW - I wouldn't use an 880 or any other D-STAR radio for the hotspot radio - way too much of a radio for that.... use an el-cheapo FM (TRUE FM) radio.
Cheers,
Ramesh.
www.freestar.us
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Hi Tony: Check out Ast node 2200 - that's our hub node - provides connectivity between Allstar, IRLP (0040) and D-STAR (XRF005A). R. Sent on the TELUS Mobility network with BlackBerry -----Original Message----- From: radioman <nn1d@comcast.net> Sender: app_rpt-users-bounces@ohnosec.org Date: Mon, 12 Nov 2012 18:17:51 Reply-To: nn1d@comcast.net Cc: <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Dstar Interface Hi Ramesh, nice to chat, actually my second asterisk node 28389 would let the local guys that don't have DStar get in from the analog side that was the idea the 880 is just a trial run, but it don't TX from the data (ps2) plug in DV 73 - Tony NN1D On 11/12/2012 6:05 PM, Ramesh Dhami (VA3UV) wrote:
On 12/11/2012 5:55 PM, radioman wrote:
Has anyone tried to interface a ID-880H to a URI
i'm using the PS2 plug on the back of the radio and every works but when the URI tells the radio to TX the radio just Beeps, in the DV mode
Anyone have any ideas?
<-- Hi Tony; Why would you have your 880H in DV mode? - shouldn't it be in FM mode? - presumably you're trying to setup some kind of hotspot since you're using a URI?
If this is the case, your 880 should be in FM mode. BTW - I wouldn't use an 880 or any other D-STAR radio for the hotspot radio - way too much of a radio for that.... use an el-cheapo FM (TRUE FM) radio.
Cheers,
Ramesh.
www.freestar.us
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Hi, i will thanks! Tony NN1D On 11/12/2012 6:53 PM, Ramesh Dhami, VA3UV/M wrote:
Hi Tony:
Check out Ast node 2200 - that's our hub node - provides connectivity between Allstar, IRLP (0040) and D-STAR (XRF005A).
R.
Sent on the TELUS Mobility network with BlackBerry
-----Original Message----- From: radioman<nn1d@comcast.net> Sender: app_rpt-users-bounces@ohnosec.org Date: Mon, 12 Nov 2012 18:17:51 Reply-To: nn1d@comcast.net Cc:<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Dstar Interface
Hi Ramesh,
nice to chat, actually my second asterisk node 28389 would let the local guys that don't have DStar get in from the analog side
that was the idea
the 880 is just a trial run, but it don't TX from the data (ps2) plug in DV
73 - Tony NN1D
On 11/12/2012 6:05 PM, Ramesh Dhami (VA3UV) wrote:
On 12/11/2012 5:55 PM, radioman wrote:
Has anyone tried to interface a ID-880H to a URI
i'm using the PS2 plug on the back of the radio and every works but when the URI tells the radio to TX the radio just Beeps, in the DV mode
Anyone have any ideas?
<-- Hi Tony; Why would you have your 880H in DV mode? - shouldn't it be in FM mode? - presumably you're trying to setup some kind of hotspot since you're using a URI?
If this is the case, your 880 should be in FM mode. BTW - I wouldn't use an 880 or any other D-STAR radio for the hotspot radio - way too much of a radio for that.... use an el-cheapo FM (TRUE FM) radio.
Cheers,
Ramesh.
www.freestar.us
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (8)
-
Bryan D. Boyle -
David KE6UPI -
radioman -
Ramesh Dhami (VA3UV) -
Ramesh Dhami, VA3UV/M
-
Robert A. Poff WB3AWJ -
Sal P. De Franco -
Shane Morris