Re: [App_rpt-users] App_rpt-users Digest, Vol 29, Issue 19
Sorry didnt reply to the list. Also in the asterisk cli of you precede any command with the word "help" you will find out how the commands work. On 17/07/2011 9:01 AM, "Andrew Gilbett" <andrew.gilbett@gmail.com> wrote:
Either edit beagle_tune1.conf (the name of the file is like that but may be different) in /etc/asterisk or use
beagle tune rx abc
where abc is between 0 & 999
Regards Andrew vk2xag On 17/07/2011 2:25 AM, "Ken Leisten" <k995996@gmail.com> wrote:
Yes, thanks its working and on line. Next question is how do I adjust tx/rx audio for each port on the LOX. "Radio-tune-menu" doesnt seem to exist.
Ken
On Sat, Jul 16, 2011 at 9:00 AM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. CURL error (George Csahanin) 2. Exp reflector (Neal Garbenis) 3. Re: Exp reflector (Bryan Boyle) 4. Re: Echolink Ka-CHunk nodes? (Phil N6TCT) 5. Re: Exp reflector (Neal Garbenis) 6. FWIW... (Bryan D. Boyle) 7. Re: Pico node configuration (Dale Weber)
---------- Forwarded message ---------- From: "George Csahanin" <george@dyb.com> To: "app_rpt mailing list" <app_rpt-users@ohnosec.org> Date: Fri, 15 Jul 2011 12:13:45 -0500 Subject: [App_rpt-users] CURL error ** When trying to use the web transciever I get this:
ERROR[26440]: pbx.c:1550 ast_func_read: Function CURL not registered
I do have curl...:
[root@radio ~]# curl --help Usage: curl [options...] <url> Options: (H) means HTTP/HTTPS only, (F) means FTP only -a/--append Append to target file when uploading (F) -A/--user-agent <string> User-Agent to send to server (H) --anyauth Pick "any" authentication method (H) -b/--cookie <name=string/file> Cookie string or file to read cookies from (H) --basic Use HTTP Basic Authentication (H) -B/--use-ascii Use ASCII/text transfer -c/--cookie-jar <file> Write cook
What is "*Function CURL not registered"* ** ??
GeorgeC W2DB **
---------- Forwarded message ---------- From: Neal Garbenis <njgarbenis@gmail.com> To: app_rpt-users@ohnosec.org Date: Fri, 15 Jul 2011 17:44:26 -0400 Subject: [App_rpt-users] Exp reflector I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped.
My question is has anyone done this before. If so how did you do it? My irlp exp is 0054.
Neal
---------- Forwarded message ---------- From: Bryan Boyle <bdboyle@bdboyle.com> To: Neal Garbenis <njgarbenis@gmail.com> Date: Fri, 15 Jul 2011 18:07:24 -0400 Subject: Re: [App_rpt-users] Exp reflector support for irlp was taken out by the authors of asterisk at Cameron's demand...did not want asterisk to cross connect to 'his' network, from what I understand. those closer please feel free to fill in or correct.
-- Bryan Sent from my iPhone please forgive misspellings...
On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis@gmail.com> wrote:
I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped.
My question is has anyone done this before. If so how did you do it? My irlp exp is 0054.
Neal _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
---------- Forwarded message ---------- From: Phil N6TCT <phil.n6tct@gmail.com> To: Ken Page <vk4akp@yahoo.com.au> Date: Fri, 15 Jul 2011 16:25:42 -0700 Subject: Re: [App_rpt-users] Echolink Ka-CHunk nodes? Hi Ken.
I have not seen this exact problem, but I have seen a problem where echolink users connect to our allstar/echolink node but no audio is passed. They can key up the node but it just transmits a carrier with no audio. For some, possibly most, echolink users it works just fine. I have chalked this up to either bad audio configuration on the echolink user's end or bad port forwarding configuration, but have not done any real investigation.
I have not seen the continuous kerchunking that you describe. (And I hope that I don't, that sounds super annoying!) Sorry ...
Phil, N6TCT
On Thu, Jul 14, 2011 at 8:21 PM, Ken Page <vk4akp@yahoo.com.au> wrote:
Hi,
I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just log in and then I'm left with a connection that just key's up and down constantly every few seconds with no audio all day until I notice and hang it up..
Do I need to update some of the All_Star software or something to get around this?
It's something that has only started in the last month or so.
73 de Ken - vk4akp@gmail.com All_Star:2134 - vk4rkp - 146.725Mhz -Neg. Echolink: 7878 .-.-. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
---------- Forwarded message ---------- From: Neal Garbenis <njgarbenis@gmail.com> To: Bryan Boyle <bdboyle@bdboyle.com> Date: Fri, 15 Jul 2011 19:30:29 -0400 Subject: Re: [App_rpt-users] Exp reflector Yes you are correct but it is ok to have exp reflectors to tie both networks together. This is what I am trying to do
Sent from my iPhone
On Jul 15, 2011, at 6:07 PM, Bryan Boyle <bdboyle@bdboyle.com> wrote:
support for irlp was taken out by the authors of asterisk at Cameron's demand...did not want asterisk to cross connect to 'his' network, from what I understand. those closer please feel free to fill in or correct.
-- Bryan Sent from my iPhone please forgive misspellings...
On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis@gmail.com> wrote:
I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped.
My question is has anyone done this before. If so how did you do it? My irlp exp is 0054.
Neal _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
---------- Forwarded message ---------- From: "Bryan D. Boyle" <bdboyle@bdboyle.com> To: app_rpt mailing list <app_rpt-users@ohnosec.org> Date: Fri, 15 Jul 2011 22:34:06 -0400 Subject: [App_rpt-users] FWIW... Some photos of the installation of active nodes 27294/27295/27774 (others are in abeyance, running under pseudo/usbxxxxx)
Hope no one minds posting the URL. It's a work in progress...
http://www.wb0yle.com/rptr.htm
73 BB WB0YLE
---------- Forwarded message ---------- From: Dale Weber <n7pkt@picklejar.org> To: app_rpt-users@ohnosec.org Date: Fri, 15 Jul 2011 20:02:19 -0700 Subject: Re: [App_rpt-users] Pico node configuration On Wednesday, July 13, 2011 07:10:22 PM Ken Leisten wrote:
Hi all,
Got Pickle Linux copied to a flash card and running on my beagleboard/LOX node. It walked me through changing some network settings for IP, gateway, subnet etc., but it never asked me for a node number or tried to download configuration from the allstar portal. I tried forcing a config through the portal but this doesn't seem to work either. What am I missing?
Got to node configuration, and select the server and node you want to run on Beagle/LOX. Then select your radio interface type as beagle (BeagleBoard-xM with LOX board). Then you will see a selection for port. Port 1 is closest to the Ethernet connector on Beagle. Finally, download the server configuration with your node to the Beagle with/LOX.
That should do it!
8-Dale
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (1)
-
Andrew Gilbett