two boxes behind a common router need to have different port numbers - have you done that? you use the "bindport" parameter in the iax config file. in the [nodes] stanza you need to specifically mention the new port number as part of the addressing Ken -----Original Message----- From: k8khw <k8khw@att.net> To: app_rpt-users <app_rpt-users@ohnosec.org> Sent: Thu, Sep 22, 2011 2:52 am Subject: [App_rpt-users] dead nodes Hi Guys I have a couple Nodes on one box one as a hub and the other as a regular Node, Radio ect I can log into the box ok, It boots up fine, I can ping out of the box ok so it is seeing the internet ok but will not take any commands from the Asterisk CLI prompt at all. If I type any command it simply does nothing. Any ideas on what could be wrong Randy _______________________________________________ pp_rpt-users mailing list pp_rpt-users@ohnosec.org ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users