Been looking all over the place for a good info on how to interface my msf5000 to my URI. Got some stuff that point to some test point, but I just cant find them on the digital control board. Anyone have a photo or a service manual the point where are the test point on the controler so that I can find them? Getting pretty frustrated here...
from my notes: all on control board. tp3: discriminator rx tp4: tx in tp9: ptt active low ag: ground there's extensive docs on repeater-builder.com, free for the asking, that goes into EVERYTHING you may need to know about interfacing to the 5k. -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings... On Jun 2, 2013, at 16:36, pete M <petem001@hotmail.com> wrote:
Been looking all over the place for a good info on how to interface my msf5000 to my URI.
Got some stuff that point to some test point, but I just cant find them on the digital control board.
Anyone have a photo or a service manual the point where are the test point on the controler so that I can find them? Getting pretty frustrated here...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Lots of good MSF-5000 stuff on Repeater Builder. Google for them. 73 Jim W7RY -----Original Message----- From: pete M Sent: Sunday, June 02, 2013 1:36 PM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Need connection for msf5000. Been looking all over the place for a good info on how to interface my msf5000 to my URI. Got some stuff that point to some test point, but I just cant find them on the digital control board. Anyone have a photo or a service manual the point where are the test point on the controler so that I can find them? Getting pretty frustrated here... _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Bryan D. Boyle -
Jim W7RY -
pete M