Re: [App_rpt-users] Debian Wheezy and RPi update
Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio
Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". Jim From: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hi Jim Dude!! Nice to see your reply. ;-) I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this.). I am looking to make an enclosure for it! I am finding out that there are some neat gadgets out there available for us play with. By The way. I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted). Best 73 Roger W4RFJ From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". Jim _____ From: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC. 73 Doug WA3DSP http://www.crompton.com/hamradio From: w4rfj@comcast.net To: telesistant@hotmail.com; doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 16:18:30 -0400 Hi Jim Dude!! Nice to see your reply… ;-) I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this…). I am looking to make an enclosure for it! I am finding out that there are some neat gadgets out there available for us play with… By The way… I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted). Best 73 Roger W4RFJ From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". JimFrom: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi updateRoger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Try using all of the features (autopatch, etc). It *REALLY* doesnt!! From: doug@crompton.com To: app_rpt-users@ohnosec.org Date: Sun, 23 Mar 2014 16:54:27 -0400 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC. 73 Doug WA3DSP http://www.crompton.com/hamradio From: w4rfj@comcast.net To: telesistant@hotmail.com; doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 16:18:30 -0400 Hi Jim Dude!! Nice to see your reply… ;-) I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this…). I am looking to make an enclosure for it! I am finding out that there are some neat gadgets out there available for us play with… By The way… I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted). Best 73 Roger W4RFJ From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". JimFrom: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi updateRoger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Autopatch works fine! ES1BIS Tervitades, Mihhail Jakovlev Sent from mobile phone От: Jim Duuuude Отправлено: марта 23, 2014 11:04 PM Кому: Doug Crompton, app_rpt mailing list Тема: Re: [App_rpt-users] Debian Wheezy and RPi update Try using all of the features (autopatch, etc). It *REALLY* doesnt!! ________________________________ From: doug@crompton.com To: app_rpt-users@ohnosec.org Date: Sun, 23 Mar 2014 16:54:27 -0400 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC. 73 Doug WA3DSP http://www.crompton.com/hamradio ________________________________ From: w4rfj@comcast.net To: telesistant@hotmail.com; doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 16:18:30 -0400 Hi Jim Dude!! Nice to see your reply... ;-) I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this...). I am looking to make an enclosure for it! I am finding out that there are some neat gadgets out there available for us play with... By The way... I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted). Best 73 Roger W4RFJ From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". Jim ________________________________ From: doug@crompton.com<mailto:doug@crompton.com> To: w4rfj@comcast.net<mailto:w4rfj@comcast.net> Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
No, it doesnt entirely. I am not going to get into an argument about this on this list. PERIOD. Trust me, I, more then ANYONE ELSE ON THIS PLANET (for HOPEFULLY PAINFULLY OBVIOUS reasons) am in a position (even WAAAYY more then Digium) to be able to authortatively assess whether DAHDI is working properly, since I am the one that determines what "properly" is for that technology. Unless Digium somehow "magically" added those patches in some newer then 2.7 release (which is REALLY REALLY unlikely), it *REALLY* doesnt work fully properly. Jim From: mihhail.jakovlev@telegrupp.ee To: telesistant@hotmail.com; doug@crompton.com; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 22:22:03 +0000 Autopatch works fine! ES1BIS Tervitades, Mihhail Jakovlev Sent from mobile phone От: Jim Duuuude Отправлено: марта 23, 2014 11:04 PM Кому: Doug Crompton, app_rpt mailing list Тема: Re: [App_rpt-users] Debian Wheezy and RPi update Try using all of the features (autopatch, etc). It *REALLY* doesnt!! From: doug@crompton.com To: app_rpt-users@ohnosec.org Date: Sun, 23 Mar 2014 16:54:27 -0400 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC. 73 Doug WA3DSP http://www.crompton.com/hamradio From: w4rfj@comcast.net To: telesistant@hotmail.com; doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 16:18:30 -0400 Hi Jim Dude!! Nice to see your reply… ;-) I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this…). I am looking to make an enclosure for it! I am finding out that there are some neat gadgets out there available for us play with… By The way… I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted). Best 73 Roger W4RFJ From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". Jim From: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yes you are right, autopatch does not work for the Debian PC version I compiled up using 2.9 version. It is something I would rarely if ever use but as you say everything should work. So why don't you make the patches yourself to the latest dahdi and make it part of a distribution or available for us to experiment with? Patch it, tar it up and make it available. 73 Doug WA3DSP http://www.crompton.com/hamradio From: telesistant@hotmail.com To: mihhail.jakovlev@telegrupp.ee; doug@crompton.com; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 15:42:38 -0700 No, it doesnt entirely. I am not going to get into an argument about this on this list. PERIOD. Trust me, I, more then ANYONE ELSE ON THIS PLANET (for HOPEFULLY PAINFULLY OBVIOUS reasons) am in a position (even WAAAYY more then Digium) to be able to authortatively assess whether DAHDI is working properly, since I am the one that determines what "properly" is for that technology. Unless Digium somehow "magically" added those patches in some newer then 2.7 release (which is REALLY REALLY unlikely), it *REALLY* doesnt work fully properly. Jim From: mihhail.jakovlev@telegrupp.ee To: telesistant@hotmail.com; doug@crompton.com; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 22:22:03 +0000 Autopatch works fine! ES1BIS Tervitades, Mihhail Jakovlev Sent from mobile phone От: Jim Duuuude Отправлено: марта 23, 2014 11:04 PM Кому: Doug Crompton, app_rpt mailing list Тема: Re: [App_rpt-users] Debian Wheezy and RPi update Try using all of the features (autopatch, etc). It *REALLY* doesnt!! From: doug@crompton.com To: app_rpt-users@ohnosec.org Date: Sun, 23 Mar 2014 16:54:27 -0400 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC. 73 Doug WA3DSP http://www.crompton.com/hamradio From: w4rfj@comcast.net To: telesistant@hotmail.com; doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 16:18:30 -0400 Hi Jim Dude!! Nice to see your reply… ;-) I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this…). I am looking to make an enclosure for it! I am finding out that there are some neat gadgets out there available for us play with… By The way… I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted). Best 73 Roger W4RFJ From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". Jim From: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Doug, https://allstarlink.org/fixed-dahdi-patches.tar.gz With that patched DAHDI I bet you could make a Distro for us to play with. -- Tim :wq On Mar 23, 2014, at 7:13 PM, Doug Crompton <doug@crompton.com> wrote:
Yes you are right, autopatch does not work for the Debian PC version I compiled up using 2.9 version. It is something I would rarely if ever use but as you say everything should work.
So why don't you make the patches yourself to the latest dahdi and make it part of a distribution or available for us to experiment with? Patch it, tar it up and make it available.
73 Doug WA3DSP http://www.crompton.com/hamradio
From: telesistant@hotmail.com To: mihhail.jakovlev@telegrupp.ee; doug@crompton.com; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 15:42:38 -0700
No, it doesnt entirely.
I am not going to get into an argument about this on this list. PERIOD.
Trust me, I, more then ANYONE ELSE ON THIS PLANET (for HOPEFULLY PAINFULLY OBVIOUS reasons) am in a position (even WAAAYY more then Digium) to be able to authortatively assess whether DAHDI is working properly, since I am the one that determines what "properly" is for that technology.
Unless Digium somehow "magically" added those patches in some newer then 2.7 release (which is REALLY REALLY unlikely), it *REALLY* doesnt work fully properly.
Jim
From: mihhail.jakovlev@telegrupp.ee To: telesistant@hotmail.com; doug@crompton.com; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 22:22:03 +0000
Autopatch works fine!
ES1BIS
Tervitades, Mihhail Jakovlev
Sent from mobile phone
От: Jim Duuuude Отправлено: марта 23, 2014 11:04 PM Кому: Doug Crompton, app_rpt mailing list Тема: Re: [App_rpt-users] Debian Wheezy and RPi update
Try using all of the features (autopatch, etc). It *REALLY* doesnt!!
From: doug@crompton.com To: app_rpt-users@ohnosec.org Date: Sun, 23 Mar 2014 16:54:27 -0400 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update
I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC.
73 Doug WA3DSP http://www.crompton.com/hamradio
From: w4rfj@comcast.net To: telesistant@hotmail.com; doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 16:18:30 -0400
Hi Jim Dude!!
Nice to see your reply… ;-)
I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this…). I am looking to make an enclosure for it!
I am finding out that there are some neat gadgets out there available for us play with…
By The way… I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted).
Best 73
Roger W4RFJ
From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update
Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!!
There are a couple of patches that are necessary, one still in "evaluation".
Jim From: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger,
Everyone has the capability to compile!
I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task.
If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list:
1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files
Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience.
I would be glad to answer any questions anyone might have along the way.
73 Doug WA3DSP http://www.crompton.com/hamradio
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yes, but as I said earlier today, it's not FULLY working. There is an issue with channel numbers assigned to pseudo channels (not being compatible with the confrence-able port range). *SOMETIME* soon (I swear.... although it is not nice to sweat :-) ), I will take a look at this. For now, the patch set seems to work "stabily". Subject: Re: [App_rpt-users] Debian Wheezy and RPi update From: tim.sawyer@mac.com Date: Sun, 23 Mar 2014 19:49:54 -0700 CC: telesistant@hotmail.com; mihhail.jakovlev@telegrupp.ee; app_rpt-users@ohnosec.org To: doug@crompton.com Doug, https://allstarlink.org/fixed-dahdi-patches.tar.gz With that patched DAHDI I bet you could make a Distro for us to play with. -- Tim :wq On Mar 23, 2014, at 7:13 PM, Doug Crompton <doug@crompton.com> wrote:Yes you are right, autopatch does not work for the Debian PC version I compiled up using 2.9 version. It is something I would rarely if ever use but as you say everything should work. So why don't you make the patches yourself to the latest dahdi and make it part of a distribution or available for us to experiment with? Patch it, tar it up and make it available. 73 Doug WA3DSP http://www.crompton.com/hamradio From: telesistant@hotmail.com To: mihhail.jakovlev@telegrupp.ee; doug@crompton.com; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 15:42:38 -0700 No, it doesnt entirely. I am not going to get into an argument about this on this list. PERIOD. Trust me, I, more then ANYONE ELSE ON THIS PLANET (for HOPEFULLY PAINFULLY OBVIOUS reasons) am in a position (even WAAAYY more then Digium) to be able to authortatively assess whether DAHDI is working properly, since I am the one that determines what "properly" is for that technology. Unless Digium somehow "magically" added those patches in some newer then 2.7 release (which is REALLY REALLY unlikely), it *REALLY* doesnt work fully properly. Jim From: mihhail.jakovlev@telegrupp.ee To: telesistant@hotmail.com; doug@crompton.com; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 22:22:03 +0000 Autopatch works fine! ES1BIS Tervitades, Mihhail Jakovlev Sent from mobile phone От: Jim Duuuude Отправлено: марта 23, 2014 11:04 PM Кому: Doug Crompton, app_rpt mailing list Тема: Re: [App_rpt-users] Debian Wheezy and RPi update Try using all of the features (autopatch, etc). It *REALLY* doesnt!! From: doug@crompton.com To: app_rpt-users@ohnosec.org Date: Sun, 23 Mar 2014 16:54:27 -0400 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update I am using dahdi-linux-complete-2.9.0+2.9.0.1 and it works for me using simpleusb. What should I be looking for that doesn't work? I have been using this on all my RPi compiles and now Debian PC. 73 Doug WA3DSP http://www.crompton.com/hamradio From: w4rfj@comcast.net To: telesistant@hotmail.com; doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Date: Sun, 23 Mar 2014 16:18:30 -0400 Hi Jim Dude!! Nice to see your reply… ;-) I am behind the 8 ball here as I need to catch up with this RPi thingy! I just picked one up to play with and as you may already know I have my Beagle board set up as a repeater (On the bench as I type this…). I am looking to make an enclosure for it! I am finding out that there are some neat gadgets out there available for us play with… By The way… I graduated College last July and will be more active now that I only have one job to worry about! Thanks for all your help with allstar! (Been a While since we have chatted). Best 73 Roger W4RFJ From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Sunday, March 23, 2014 4:05 PM To: Doug Crompton; Roger Jordan Cc: app_rpt mailing list Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". JimFrom: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi updateRoger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem._______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Is there or is there not an actual source repository for this project hosted anywhere? I can't seem to find one. Thanks, Eric K5BFC
which "this" are you referring to? :-) Jim From: apprptusers@westbrook.com Date: Sun, 23 Mar 2014 16:23:09 -0600 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Is there or is there not an actual source repository for this project hosted anywhere? I can't seem to find one. Thanks, Eric K5BFC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Fair question! And I must ask you to forgive me, because I'm new here. Why not "all". Presumably, the main project is called "app_rpt", yes? Taking a step back, I should probably ask, what indeed *are* the actual projects involved in building an Allstar node, and where are all of their corresponding source repos? Asterisk has an SVN repo, of course, which I've followed and used for over a decade (even though I now use git-svn to access it). Now it's time to build this fork, and I need to know what to pull and where to pull it from. All current pointers appreciated! Eric K5BFC On Sun, Mar 23, 2014 at 5:12 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
which "this" are you referring to? :-)
Jim
------------------------------ From: apprptusers@westbrook.com Date: Sun, 23 Mar 2014 16:23:09 -0600 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update
Is there or is there not an actual source repository for this project hosted anywhere? I can't seem to find one.
Thanks, Eric K5BFC
Here is the one for app_rpt: http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/?root... From: apprptusers@westbrook.com Date: Sun, 23 Mar 2014 17:44:33 -0600 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org Fair question! And I must ask you to forgive me, because I'm new here. Why not "all". Presumably, the main project is called "app_rpt", yes? Taking a step back, I should probably ask, what indeed are the actual projects involved in building an Allstar node, and where are all of their corresponding source repos? Asterisk has an SVN repo, of course, which I've followed and used for over a decade (even though I now use git-svn to access it). Now it's time to build this fork, and I need to know what to pull and where to pull it from. All current pointers appreciated! Eric K5BFC On Sun, Mar 23, 2014 at 5:12 PM, Jim Duuuude <telesistant@hotmail.com> wrote: which "this" are you referring to? :-) Jim From: apprptusers@westbrook.com Date: Sun, 23 Mar 2014 16:23:09 -0600 Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Is there or is there not an actual source repository for this project hosted anywhere? I can't seem to find one. Thanks, Eric K5BFC
Thanks! But that seems to be just a web interface to the repo itself. It offers a tarball, but I can't seem to find a link to the repo itself for use directly by SVN or other tools. May I have a cloneable link to the repo itself please? Also, are there others, as implied by your original "which one" question? Thanks again, Eric K5BFC On Sun, Mar 23, 2014 at 5:46 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
Here is the one for app_rpt:
http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/?root...
I posted the fixed-dahdi-patches.tar.gz file as: https://allstarlink.org/fixed-dahdi-patches.tar.gz This contains a README file that explains how to apply them. This patches DAHDI 2.5.0.1 thru current. Jim From: telesistant@hotmail.com To: doug@crompton.com; w4rfj@comcast.net Date: Sun, 23 Mar 2014 13:05:05 -0700 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". Jim From: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
BTW, this does *NOT* completely fix it. There is some sort of an "ISSUE" with the assignment of pseudo-channels that I have to look into more properly, but this patch set seems to be "stable" at least. Jim From: telesistant@hotmail.com To: doug@crompton.com; w4rfj@comcast.net Date: Sun, 23 Mar 2014 13:53:38 -0700 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update I posted the fixed-dahdi-patches.tar.gz file as: https://allstarlink.org/fixed-dahdi-patches.tar.gz This contains a README file that explains how to apply them. This patches DAHDI 2.5.0.1 thru current. Jim From: telesistant@hotmail.com To: doug@crompton.com; w4rfj@comcast.net Date: Sun, 23 Mar 2014 13:05:05 -0700 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Yes, well except for the fact that the stock DAHDI from Digium DOESNT WORK!! There are a couple of patches that are necessary, one still in "evaluation". Jim From: doug@crompton.com To: w4rfj@comcast.net Date: Sun, 23 Mar 2014 16:03:47 -0400 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hi Doug, I guess I did not choose my words carefully, I am finding out that I have a little bit to learn as I just picked up (at the Trenton Computer Show) a Raspberry Pi. I was talking about the Binary files they flash to an SD and then boot. Can Asterisk and APP-APT be compiled then installed with the existing system? I guess If I had been paying attention I would already have this info! ;-) Sorry! Nice to hear from you tho! Hope you are well! Roger W4RFJ From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, March 23, 2014 4:04 PM To: Roger Jordan Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Debian Wheezy and RPi update Roger, Everyone has the capability to compile! I think you are talking about the PC Debian compile? I believe the ISO would exceed DVD size. I guess you could really trim it down but setting up a system for someone else to use is not a trivial task. If anyone really wants to run on Debian I have some notes on setting it up from scratch but you still need to have a more than basic understanding of Linux and Debian in particular. You would learn a lot doing this though. Patience and persistence are required! For those who want to try it here is the quick list: 1. Have a PC and drive you can dedicate 2. Download the Debian net installation CD (you can do this in windows) 3. Boot on the CD and install Debian (if gets the rest of the stuff via the Internet) 4. Bring up Debian and configure the system for your tastes - DHCP/static, ssh port, etc. 5. Download the kernel header files and other dependencies needed for compiling 6. Get DAHDI complete source and compile and install 7. Get asterisk/allstar source and compile and install 8. Copy over or create and configure the /etc/asterisk configuration files Note that in steps 6 and 7 you will without doubt get errors due to the lack of required dependencies or files in the wrong place. You need to correct the problem and start the compile over. 99.99% of errors you will get are correctable with patience. I would be glad to answer any questions anyone might have along the way. 73 Doug WA3DSP http://www.crompton.com/hamradio
participants (6)
-
Doug Crompton -
Eric Westbrook K5BFC -
Jim Duuuude -
Mihhail Jakovlev -
Roger Jordan -
Tim Sawyer