Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts? Thank you Joe Cutrone K2OL Node# 46988 Sent from my iPad
Joe, Verify the age of /var/lib/asterisk/rpt_extnodes ...mike/kb8jnm On 3/26/2019 7:57 PM, Joe C wrote:
Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts?
Thank you Joe Cutrone K2OL Node# 46988
Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Actually Joe, You must not be logged-in to the system. Your node 46988 is not in the list. Verify your password in iax.rpt. ...mike/kb8jnm On 3/26/2019 7:57 PM, Joe C wrote:
Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts?
Thank you Joe Cutrone K2OL Node# 46988
Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hi Mike I’m getting “no such file or directory, error code 2, error message from server:no such file Thanks Joe K2ol Sent from my iPad
On Mar 26, 2019, at 8:20 PM, Mike <mm@midnighteng.com> wrote:
Actually Joe, You must not be logged-in to the system. Your node 46988 is not in the list.
Verify your password in iax.rpt.
...mike/kb8jnm
On 3/26/2019 7:57 PM, Joe C wrote: Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts? Thank you Joe Cutrone K2OL Node# 46988 Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Sorry joe, The file is iax.conf in /etc/asterisk The line you are looking for is like this one register = 29999:xxxxxxxxxx@register.allstarlink.org where xxxxxxx is your password you can verify with the data at allstarling.org ...mike/kb8jnm On 3/26/2019 9:02 PM, Joe C wrote:
Hi Mike I’m getting “no such file or directory, error code 2, error message from server:no such file
Thanks Joe K2ol
Sent from my iPad
On Mar 26, 2019, at 8:20 PM, Mike <mm@midnighteng.com> wrote:
Actually Joe, You must not be logged-in to the system. Your node 46988 is not in the list.
Verify your password in iax.rpt.
...mike/kb8jnm
On 3/26/2019 7:57 PM, Joe C wrote: Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts? Thank you Joe Cutrone K2OL Node# 46988 Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Ok just checked and my passcode is in the iax.conf Joe K2OL Sent from my iPhone
On Mar 26, 2019, at 9:06 PM, Mike <mm@midnighteng.com> wrote:
Sorry joe, The file is iax.conf in /etc/asterisk
The line you are looking for is like this one
register = 29999:xxxxxxxxxx@register.allstarlink.org where xxxxxxx is your password you can verify with the data at allstarling.org
...mike/kb8jnm
On 3/26/2019 9:02 PM, Joe C wrote: Hi Mike I’m getting “no such file or directory, error code 2, error message from server:no such file Thanks Joe K2ol Sent from my iPad
On Mar 26, 2019, at 8:20 PM, Mike <mm@midnighteng.com> wrote:
Actually Joe, You must not be logged-in to the system. Your node 46988 is not in the list.
Verify your password in iax.rpt.
...mike/kb8jnm
On 3/26/2019 7:57 PM, Joe C wrote: Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts? Thank you Joe Cutrone K2OL Node# 46988 Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Well if you are still having issues, you did not say if you changed/fixed it, make sure you have network connectivity. ...mike/kb8jnm On 3/26/2019 9:15 PM, Joe C wrote:
Ok just checked and my passcode is in the iax.conf
Joe K2OL
Sent from my iPhone
On Mar 26, 2019, at 9:06 PM, Mike <mm@midnighteng.com> wrote:
Sorry joe, The file is iax.conf in /etc/asterisk
The line you are looking for is like this one
register = 29999:xxxxxxxxxx@register.allstarlink.org where xxxxxxx is your password you can verify with the data at allstarling.org
...mike/kb8jnm
On 3/26/2019 9:02 PM, Joe C wrote: Hi Mike I’m getting “no such file or directory, error code 2, error message from server:no such file Thanks Joe K2ol Sent from my iPad
On Mar 26, 2019, at 8:20 PM, Mike <mm@midnighteng.com> wrote:
Actually Joe, You must not be logged-in to the system. Your node 46988 is not in the list.
Verify your password in iax.rpt.
...mike/kb8jnm
On 3/26/2019 7:57 PM, Joe C wrote: Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts? Thank you Joe Cutrone K2OL Node# 46988 Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I checked the iax.conf and my passcode was there. I did another reboot with no change. So odd cause when I key my radio it’s responding with my call sign and tone. It’s not showing up on allstar and giving me a connection fail upon trying to key another node. 73, Joe K2ol Sent from my iPad
On Mar 26, 2019, at 9:26 PM, Mike <mm@midnighteng.com> wrote:
Well if you are still having issues, you did not say if you changed/fixed it, make sure you have network connectivity.
...mike/kb8jnm
On 3/26/2019 9:15 PM, Joe C wrote: Ok just checked and my passcode is in the iax.conf Joe K2OL Sent from my iPhone
On Mar 26, 2019, at 9:06 PM, Mike <mm@midnighteng.com> wrote:
Sorry joe, The file is iax.conf in /etc/asterisk
The line you are looking for is like this one
register = 29999:xxxxxxxxxx@register.allstarlink.org where xxxxxxx is your password you can verify with the data at allstarling.org
...mike/kb8jnm
On 3/26/2019 9:02 PM, Joe C wrote: Hi Mike I’m getting “no such file or directory, error code 2, error message from server:no such file Thanks Joe K2ol Sent from my iPad
On Mar 26, 2019, at 8:20 PM, Mike <mm@midnighteng.com> wrote:
Actually Joe, You must not be logged-in to the system. Your node 46988 is not in the list.
Verify your password in iax.rpt.
...mike/kb8jnm
On 3/26/2019 7:57 PM, Joe C wrote: Running into a connection fail every time I *3 a node. I tried multiple nodes with the same connection fail outcome. I read through literature on the issue, did as stated with no luck. I logged into my Supermon and my system is responding to the prompts as well as showing my Ptt-detected. Note if you look on Allstar it will show my node number in green BUT not highlighted in green, when you click on it you’ll see activity which of course is whatever activity I’m doing trying to figure this out. Any thoughts? Thank you Joe Cutrone K2OL Node# 46988 Sent from my iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 3/26/19 9:44 PM, Joe C wrote:
I checked the iax.conf and my passcode was there. I did another reboot with no change. So odd cause when I key my radio it’s responding with my call sign and tone. It’s not showing up on allstar and giving me a connection fail upon trying to key another node.
Your node password is incorrect: [Mar 27 01:53:30] Host 108.41.61.124 failed MD5 authentication for '46988' Unless 108.41.61.124 is not your IP, then we may bigger problems :) Once you fix your node password based on what's in the portal you will register and then pull a rpt_extnodes file. Be sure to do 'iax2 reload' from asterisk after you change the config in iax.conf. 'iax2 show registry' will show you your registration status. Once you have this working, give it a few min and it should pull a nodes list, then check it using 'tail -n6 /var/lib/asterisk/rpt_extnodes' ;Generated 3264 records in 0.058 seconds. ;Served in 0.012 seconds. ;Served from cache: Yes ;Generated at 2019-03-27 01:55:00 UTC by register-ord.allstarlink.org This will show you the age and what nodes server it was generated on. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Where did you find that up address? That’s not my IP address and my node shows something different. 73, Joe K2ol Sent from my iPad
On Mar 26, 2019, at 10:02 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/26/19 9:44 PM, Joe C wrote: I checked the iax.conf and my passcode was there. I did another reboot with no change. So odd cause when I key my radio it’s responding with my call sign and tone. It’s not showing up on allstar and giving me a connection fail upon trying to key another node.
Your node password is incorrect:
[Mar 27 01:53:30] Host 108.41.61.124 failed MD5 authentication for '46988'
Unless 108.41.61.124 is not your IP, then we may bigger problems :)
Once you fix your node password based on what's in the portal you will register and then pull a rpt_extnodes file.
Be sure to do 'iax2 reload' from asterisk after you change the config in iax.conf. 'iax2 show registry' will show you your registration status.
Once you have this working, give it a few min and it should pull a nodes list, then check it using 'tail -n6 /var/lib/asterisk/rpt_extnodes'
;Generated 3264 records in 0.058 seconds. ;Served in 0.012 seconds. ;Served from cache: Yes ;Generated at 2019-03-27 01:55:00 UTC by register-ord.allstarlink.org
This will show you the age and what nodes server it was generated on.
-- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 3/26/19 10:13 PM, Joe C wrote:
Where did you find that up address?
That's from the log server showing someone attempting to register 46988 from that IP on the registration server. It's failing.
That’s not my IP address and my node shows something different.
What is your IP? Saying it shows something different and providing no data is not helpful. Are you not in NYC on fios? If that's not your IP please let me know and we'll blackhole it so it can't talk to the registration servers. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Thinking of redoing the whole image from the ground up, what do you think? My ip starts with 192. 73, Joe K2ol Sent from my iPad
On Mar 26, 2019, at 10:24 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/26/19 10:13 PM, Joe C wrote: Where did you find that up address?
That's from the log server showing someone attempting to register 46988 from that IP on the registration server. It's failing.
That’s not my IP address and my node shows something different.
What is your IP? Saying it shows something different and providing no data is not helpful.
Are you not in NYC on fios? If that's not your IP please let me know and we'll blackhole it so it can't talk to the registration servers.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 3/26/19 10:30 PM, Joe C wrote:
Thinking of redoing the whole image from the ground up, what do you think?
We've given you a number of things to check to troubleshoot the problem and you've done none of them. It's likely a registration issue and a misconfiguration in your iax.conf file is the root cause. Reinstalling isn't going to net you anything if you are not willing to troubleshoot.
My ip starts with 192.
So do 16 million other IPs. I asked for your IP, not what it started with. Provide that and I'll be able to help you. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Completely understand I’ll do everything you and mike said tomorrow and give you a follow up of the out come. Thank you for your time and help thus far. 73 Joe k2OL Sent from my iPhone
On Mar 26, 2019, at 10:46 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/26/19 10:30 PM, Joe C wrote: Thinking of redoing the whole image from the ground up, what do you think?
We've given you a number of things to check to troubleshoot the problem and you've done none of them. It's likely a registration issue and a misconfiguration in your iax.conf file is the root cause.
Reinstalling isn't going to net you anything if you are not willing to troubleshoot.
My ip starts with 192.
So do 16 million other IPs. I asked for your IP, not what it started with. Provide that and I'll be able to help you.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14 73, Joe K2ol Sent from my iPhone
On Mar 26, 2019, at 10:46 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/26/19 10:30 PM, Joe C wrote: Thinking of redoing the whole image from the ground up, what do you think?
We've given you a number of things to check to troubleshoot the problem and you've done none of them. It's likely a registration issue and a misconfiguration in your iax.conf file is the root cause.
Reinstalling isn't going to net you anything if you are not willing to troubleshoot.
My ip starts with 192.
So do 16 million other IPs. I asked for your IP, not what it started with. Provide that and I'll be able to help you.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 3/27/19 11:55 AM, Joe C wrote:
Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14
Joe, that's your internal address. You are behind some sort of NAT that's likely mapping that to a public IP address. We need to get the public IP, and ensure the UDP port 4569 is forwarded from the outside public address to your internal address of 192.168.1.14. If this is not forwarded properly, your connections will fail. So I bet your IP is likely 108.41.61.124, and your register= statement is incorrect due to the password errors we're seeing on the registration server. Please double check this. Unicast me your iax.conf and I'll take a look at it. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Hi Bryan, I’m new to all this, how do I unicast? Also I went into my rpt.conf and saw my ip information reset itself, maybe from the update. So I put in my 192.168.1.14 ip in and yes the 108.41.61.124 is my public address so I put that in as well. Let me know how to unicast and I’ll send it over. Thanks for everything 73 Joe K2OL Sent from my iPad
On Mar 27, 2019, at 3:18 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/27/19 11:55 AM, Joe C wrote: Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14
Joe, that's your internal address. You are behind some sort of NAT that's likely mapping that to a public IP address. We need to get the public IP, and ensure the UDP port 4569 is forwarded from the outside public address to your internal address of 192.168.1.14. If this is not forwarded properly, your connections will fail.
So I bet your IP is likely 108.41.61.124, and your register= statement is incorrect due to the password errors we're seeing on the registration server. Please double check this. Unicast me your iax.conf and I'll take a look at it.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
First, it was stated earlier in this thread that this is a hamvoip node. Even though the Hamvoip distro is significantly different than AllStar, and diverging further with each release, we do our best to support all users. That said... This looks like the same issue I found on my hamvoip last night. There was a # in the registration Username even thought I had the hamvoip registration commented out. iax2 show registry Host dnsmgr Username Perceived Refresh State 74.91.126.182:4569 Y 2534#4568 47.157.250.110:4568 60 Registered 74.91.126.182:4569 Y 2510#4568 47.157.250.110:4568 60 Registered iax.conf: register = 2534:xxxxx@register.allstarlink.org register = 2510:xxxxx@register.allstarlink.org ;register=2510#4568:xxxxx@register.hamvoip.org ;register=2534#4568:xxxxxxx@register.hamvoip.org I had to delete the commented register lines and restart Asterisk to get AllStar registration to work. I tried to repeat the problem today and could not. So who knows what happened. In any case, for AllStar your registration has to look more like this. You likely have only one node on your server and in that case only one registration. iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 2510 47.157.250.110:4568 60 Registered 44.98.254.145:4569 Y 2534 47.157.250.110:4568 60 Registered Another thing to keep in mind about hamvoip is that there is no rpt_extnodes file. It's been replaced with dns. Dns can be queried like so *CLI> rpt lookup <node number> On Wed, Mar 27, 2019 at 12:19 PM Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/27/19 11:55 AM, Joe C wrote:
Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14
Joe, that's your internal address. You are behind some sort of NAT that's likely mapping that to a public IP address. We need to get the public IP, and ensure the UDP port 4569 is forwarded from the outside public address to your internal address of 192.168.1.14. If this is not forwarded properly, your connections will fail.
So I bet your IP is likely 108.41.61.124, and your register= statement is incorrect due to the password errors we're seeing on the registration server. Please double check this. Unicast me your iax.conf and I'll take a look at it.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
Hi I tried everything recommended and still have connection fail. Going on day 3 with this and I’m banging my head against the wall Lol. I do appreciate all of your help, doesn’t seem to want to work out. 73, Joe K2OL Sent from my iPhone
On Mar 27, 2019, at 11:59 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
First, it was stated earlier in this thread that this is a hamvoip node. Even though the Hamvoip distro is significantly different than AllStar, and diverging further with each release, we do our best to support all users. That said...
This looks like the same issue I found on my hamvoip last night. There was a # in the registration Username even thought I had the hamvoip registration commented out.
iax2 show registry Host dnsmgr Username Perceived Refresh State 74.91.126.182:4569 Y 2534#4568 47.157.250.110:4568 60 Registered 74.91.126.182:4569 Y 2510#4568 47.157.250.110:4568 60 Registered
iax.conf: register = 2534:xxxxx@register.allstarlink.org register = 2510:xxxxx@register.allstarlink.org ;register=2510#4568:xxxxx@register.hamvoip.org ;register=2534#4568:xxxxxxx@register.hamvoip.org
I had to delete the commented register lines and restart Asterisk to get AllStar registration to work.
I tried to repeat the problem today and could not. So who knows what happened. In any case, for AllStar your registration has to look more like this. You likely have only one node on your server and in that case only one registration.
iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 2510 47.157.250.110:4568 60 Registered 44.98.254.145:4569 Y 2534 47.157.250.110:4568 60 Registered
Another thing to keep in mind about hamvoip is that there is no rpt_extnodes file. It's been replaced with dns. Dns can be queried like so
*CLI> rpt lookup <node number>
On Wed, Mar 27, 2019 at 12:19 PM Bryan Fields <Bryan@bryanfields.net> wrote: On 3/27/19 11:55 AM, Joe C wrote:
Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14
Joe, that's your internal address. You are behind some sort of NAT that's likely mapping that to a public IP address. We need to get the public IP, and ensure the UDP port 4569 is forwarded from the outside public address to your internal address of 192.168.1.14. If this is not forwarded properly, your connections will fail.
So I bet your IP is likely 108.41.61.124, and your register= statement is incorrect due to the password errors we're seeing on the registration server. Please double check this. Unicast me your iax.conf and I'll take a look at it.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I have teamviewer if anyone willing to help me out that way. If so email me. Thanks 73, Joe K2OL Sent from my iPhone
On Mar 27, 2019, at 11:59 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
First, it was stated earlier in this thread that this is a hamvoip node. Even though the Hamvoip distro is significantly different than AllStar, and diverging further with each release, we do our best to support all users. That said...
This looks like the same issue I found on my hamvoip last night. There was a # in the registration Username even thought I had the hamvoip registration commented out.
iax2 show registry Host dnsmgr Username Perceived Refresh State 74.91.126.182:4569 Y 2534#4568 47.157.250.110:4568 60 Registered 74.91.126.182:4569 Y 2510#4568 47.157.250.110:4568 60 Registered
iax.conf: register = 2534:xxxxx@register.allstarlink.org register = 2510:xxxxx@register.allstarlink.org ;register=2510#4568:xxxxx@register.hamvoip.org ;register=2534#4568:xxxxxxx@register.hamvoip.org
I had to delete the commented register lines and restart Asterisk to get AllStar registration to work.
I tried to repeat the problem today and could not. So who knows what happened. In any case, for AllStar your registration has to look more like this. You likely have only one node on your server and in that case only one registration.
iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 2510 47.157.250.110:4568 60 Registered 44.98.254.145:4569 Y 2534 47.157.250.110:4568 60 Registered
Another thing to keep in mind about hamvoip is that there is no rpt_extnodes file. It's been replaced with dns. Dns can be queried like so
*CLI> rpt lookup <node number>
On Wed, Mar 27, 2019 at 12:19 PM Bryan Fields <Bryan@bryanfields.net> wrote: On 3/27/19 11:55 AM, Joe C wrote:
Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14
Joe, that's your internal address. You are behind some sort of NAT that's likely mapping that to a public IP address. We need to get the public IP, and ensure the UDP port 4569 is forwarded from the outside public address to your internal address of 192.168.1.14. If this is not forwarded properly, your connections will fail.
So I bet your IP is likely 108.41.61.124, and your register= statement is incorrect due to the password errors we're seeing on the registration server. Please double check this. Unicast me your iax.conf and I'll take a look at it.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hi David and everyone else I finally got it. Note I’m below amateur at programming. It was exactly as everyone was saying my password in iax.conf was indeed wrong. Instead of using the Allstar node password I had my passcode I came up with to get into my set up. I really cannot thank you all enough. I did learn some going through everything. Thanks to all 73, Joe K2OL Sent from my iPhone
On Mar 28, 2019, at 6:54 PM, David McGough <kb4fxc@inttek.net> wrote:
Hi Joe,
I'll be glad to help you get going. Please follow up with me directly.
Thanks,
73, David KB4FXC
On Thu, 28 Mar 2019, Joe C wrote:
I have teamviewer if anyone willing to help me out that way. If so email me. Thanks
73, Joe K2OL
Sent from my iPhone
Hi Joe, Very good! Give us a yell if you have more questions. On Thu, 28 Mar 2019, Joe C wrote:
Hi David and everyone else I finally got it. Note Iâm below amateur at programming. It was exactly as everyone was saying my password in iax.conf was indeed wrong. Instead of using the Allstar node password I had my passcode I came up with to get into my set up. I really cannot thank you all enough. I did learn some going through everything.
Thanks to all 73, Joe K2OL
Sent from my iPhone
On Mar 28, 2019, at 6:54 PM, David McGough <kb4fxc@inttek.net> wrote:
Hi Joe,
I'll be glad to help you get going. Please follow up with me directly.
Thanks,
73, David KB4FXC
On Thu, 28 Mar 2019, Joe C wrote:
I have teamviewer if anyone willing to help me out that way. If so email me. Thanks
73, Joe K2OL
Sent from my iPhone
On 3/28/19 6:54 PM, David McGough wrote:
I'll be glad to help you get going. Please follow up with me directly.
Watch out for David, he's a snake and known criminal. Encouraging people to take things off list allows him to control the discussion. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Bryan, This user asking for support and several days hadn't resolved their issue. As a courtesy, I offered to help without cluttering the app_rpt-users list with usage-case specific problems. The resolution to his problem was simple, an incorrect registration password in the iax.conf file. If you'd rather I answer HamVoIP support questions on app_rpt-users, I certainly will. Otherwise, you need to bury your dead horse about this subject. Your continuing flame war only alienates AllStar users and tears down ASL. However, like others have mentioned to me, I'm beginning to think that's your goal. 73, David KB4FXC On Sun, 31 Mar 2019, Bryan Fields wrote:
On 3/28/19 6:54 PM, David McGough wrote:
I'll be glad to help you get going. Please follow up with me directly.
Watch out for David, he's a snake and known criminal.
Encouraging people to take things off list allows him to control the discussion.
73's
Listen I don’t quite know what’s going on here for what looks to be an issue amongst a couple people. I hope you both can talk and find closer to such issue. If someone can get back to me on what software is good to use to operate Allstar otherwise I will not operate on Allstar. My email is K2ol@yahoo.com feel free to email me off to the side if answering on here makes anyone uncomfortable. Thanks Joe k2OL Sent from my iPhone
On Mar 31, 2019, at 2:18 PM, David McGough <kb4fxc@inttek.net> wrote:
Bryan,
This user asking for support and several days hadn't resolved their issue. As a courtesy, I offered to help without cluttering the app_rpt-users list with usage-case specific problems.
The resolution to his problem was simple, an incorrect registration password in the iax.conf file.
If you'd rather I answer HamVoIP support questions on app_rpt-users, I certainly will.
Otherwise, you need to bury your dead horse about this subject. Your continuing flame war only alienates AllStar users and tears down ASL. However, like others have mentioned to me, I'm beginning to think that's your goal.
73, David KB4FXC
On Sun, 31 Mar 2019, Bryan Fields wrote:
On 3/28/19 6:54 PM, David McGough wrote: I'll be glad to help you get going. Please follow up with me directly.
Watch out for David, he's a snake and known criminal.
Encouraging people to take things off list allows him to control the discussion.
73's
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 3/31/19 2:18 PM, David McGough wrote:
Bryan,
This user asking for support and several days hadn't resolved their issue. As a courtesy, I offered to help without cluttering the app_rpt-users list with usage-case specific problems.
The resolution to his problem was simple, an incorrect registration password in the iax.conf file.
We found this out 5 days ago. He refused to post his rpt.conf or send it to me unicast. He did think it was entirely appropriate to SMS and call me a number of times, however.
If you'd rather I answer HamVoIP support questions on app_rpt-users, I certainly will.
I'd rather you immediately stop your ongoing criminal enterprise and distribution of HamVOIP. Your piracy and theft has done nothing but destroy a great project.
Otherwise, you need to bury your dead horse about this subject.
John, there is only one way to do that, and it's for you to stop your actions immediately. You're a criminal and engaged in an ongoing criminal enterprise. Why should we work with someone who has violated the very basis of our community standards? -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Bryan, I’m new to Allstar and programming in general. You had your number attached to your email signature so I thought calling once and texting wasn’t a issue but obviously it was so my apologies there. I will definitely not contact you further. Apparently your hate and anger toward whatever going on with the software is spilling into Innocent hams like myself just trying to get help. Do note I had zero clue there was issues on software. I do not know what unicast is as well. I really came across some wonderful people on Allstar and wish to continue doing so. Again my apologies for being a burden Bryan. Thanks to all. God speed Joe K2OL Sent from my iPhone
On Mar 31, 2019, at 4:54 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/31/19 2:18 PM, David McGough wrote: Bryan,
This user asking for support and several days hadn't resolved their issue. As a courtesy, I offered to help without cluttering the app_rpt-users list with usage-case specific problems.
The resolution to his problem was simple, an incorrect registration password in the iax.conf file.
We found this out 5 days ago. He refused to post his rpt.conf or send it to me unicast. He did think it was entirely appropriate to SMS and call me a number of times, however.
If you'd rather I answer HamVoIP support questions on app_rpt-users, I certainly will.
I'd rather you immediately stop your ongoing criminal enterprise and distribution of HamVOIP. Your piracy and theft has done nothing but destroy a great project.
Otherwise, you need to bury your dead horse about this subject.
John, there is only one way to do that, and it's for you to stop your actions immediately. You're a criminal and engaged in an ongoing criminal enterprise. Why should we work with someone who has violated the very basis of our community standards?
-- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Bryan, David, It seems apparent that the 2 of you have likely had some differences and disagreements in the past. Stopping to assassination of another’s character essentially ad hominem is inappropriate for any public list. Let’s all remember to keep it friendly and professional showing each other due courtesy and addressing our comments to the topics and issues covered by the list ie app_rpt running on top of asterisk. Eric Af6ep Sent using SMTP.
On Mar 31, 2019, at 10:52 AM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/28/19 6:54 PM, David McGough wrote: I'll be glad to help you get going. Please follow up with me directly.
Watch out for David, he's a snake and known criminal.
Encouraging people to take things off list allows him to control the discussion.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (7)
-
Bryan Fields -
David McGough -
Eric Fort -
Joe C -
Joe C
-
Mike -
Tim Sawyer