Hi Bryan, I’m new to all this, how do I unicast? Also I went into my rpt.conf and saw my ip information reset itself, maybe from the update. So I put in my 192.168.1.14 ip in and yes the 108.41.61.124 is my public address so I put that in as well. Let me know how to unicast and I’ll send it over. Thanks for everything 73 Joe K2OL Sent from my iPad
On Mar 27, 2019, at 3:18 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 3/27/19 11:55 AM, Joe C wrote: Hi Bryan just saw you asked for my IP address. It’s 192.168.1.14
Joe, that's your internal address. You are behind some sort of NAT that's likely mapping that to a public IP address. We need to get the public IP, and ensure the UDP port 4569 is forwarded from the outside public address to your internal address of 192.168.1.14. If this is not forwarded properly, your connections will fail.
So I bet your IP is likely 108.41.61.124, and your register= statement is incorrect due to the password errors we're seeing on the registration server. Please double check this. Unicast me your iax.conf and I'll take a look at it.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.