Re: [App_rpt] Problems with Echolink on app_rpt
Matt, If you followed the instructions is the ACID sysadmin manual, everything should be fine. Since database show is working, most of it is up and running. You might want to post your echolink.conf file with rhe password obiliterated to the list so that we can see if it is ok. If you try to connect before everyone gets an updated list the connection will fail. Please try after about an hour so that everyone gets a list with your node in it. Something else to check: Is your node showing up on echolink.org? Finally, don't worry about this message:
WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13'
Steve WA6ZFT
From: "Matt Beasant" <g4rky@yahoo.co.uk> Date: 2008/10/11 Sat AM 01:55:47 PDT To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> Subject: [App_rpt] Problems with Echolink on app_rpt
Dear all,
I've upgraded my node to the latest release and have attempted to get Echolink working on my node.
However, I'm having problems and wondered if anyone could point me in the right direction for a fix?
When I try to make an outgoing call from my node to an echolink node, I instantly get the "node connection failed" message.
On the CLI, the announcement text is immediately preceeded by:
WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13'
When I try to make a call IN to my node form an Echolink node, I see:
ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for a/ipaddr/81.156.xxx.xxx
However, I do frequently see messages such as:
NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink server europe.echolink.org
and the database show command works fine also.
Do I need to follow these instructions here : http://app-rpt.qrvc.com/echolink.html or is my node already up to date enough to not have to do this?
I also noted the existence of an IRLP config file in the config examples - I need IRLP functionality on my node and so is this something I can use too?
Thanks in advance for any and all help received!
Kind regards,
Matt G4RKY node 2250 & 2237
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Hi Steve and thanks for the reply.
After much messing about - and learning in the porcess of course - I've
fixed it!
The context [radio-secure] in the example given in the instructions at
http://app-rpt.qrvc.com/echolink.html where it tells you what to put in your
extensions.conf file may be incorrect.
I had the following in there and it didnt work for incoming calls:
[radio-secure]
exten => ${2250},1,rpt,${2250}
I replaced it with:
[echolink-in]
exten => 2250,1,rpt(2250|X)
and commented out the reference to [radio-secure] in my Echolink.conf file
and added one at the end for [echolink-in] and everything is now working,
both in and out!
Clearly I can see the differebetween the two statements but being a real
Asterisk newbie, it really means nothing to me so I dont know what the
effect of the wrong statement would be!
Sorry to be so vague but I have now got it all working, so thank you for
replying.
Now, who can tell me how to get IRLP working? Please?
Thanks everyone and have a great weekend
Kind regards,
Matt
G4RKY
Node 2250 & 2237
2008/10/11 <hwstar@rodgers.sdcoxmail.com>
> Matt,
>
> If you followed the instructions is the ACID sysadmin manual, everything
> should be fine. Since database show
> is working, most of it is up and running. You might want to post your
> echolink.conf file with rhe password obiliterated
> to the list so that we can see if it is ok.
>
> If you try to connect before everyone gets an updated list
> the connection will fail. Please try after about an hour
> so that everyone gets a list with your node in it.
>
> Something else to check: Is your node showing up on echolink.org?
>
> Finally, don't worry about this message:
>
> > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass
> '13'
>
> Steve
> WA6ZFT
>
>
>
>
> >
> > From: "Matt Beasant" <g4rky@yahoo.co.uk>
> > Date: 2008/10/11 Sat AM 01:55:47 PDT
> > To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net>
> > Subject: [App_rpt] Problems with Echolink on app_rpt
> >
> > Dear all,
> >
> > I've upgraded my node to the latest release and have attempted to get
> > Echolink working on my node.
> >
> > However, I'm having problems and wondered if anyone could point me in the
> > right direction for a fix?
> >
> > When I try to make an outgoing call from my node to an echolink node, I
> > instantly get the "node connection failed" message.
> >
> > On the CLI, the announcement text is immediately preceeded by:
> >
> > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass
> '13'
> >
> > When I try to make a call IN to my node form an Echolink node, I see:
> >
> > ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for
> > a/ipaddr/81.156.xxx.xxx
> >
> > However, I do frequently see messages such as:
> >
> > NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink
> server
> > europe.echolink.org
> >
> > and the database show command works fine also.
> >
> > Do I need to follow these instructions here :
> > http://app-rpt.qrvc.com/echolink.html or is my node already up to date
> > enough to not have to do this?
> >
> > I also noted the existence of an IRLP config file in the config examples
> - I
> > need IRLP functionality on my node and so is this something I can use
> too?
> >
> > Thanks in advance for any and all help received!
> >
> > Kind regards,
> >
> > Matt
> > G4RKY
> > node 2250 & 2237
> >
> >
>
> _______________________________________________
> App_rpt mailing list
> App_rpt@lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
>
> _______________________________________________
> App_rpt mailing list
> App_rpt@lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
>
Matt Beasant wrote:
Now, who can tell me how to get IRLP working? Please?
<-- Hi Matt; I was just talking to Jim about the chan_irlp documentation this morning... as I mentioned last night, hang tight, I'll be sending Jim a marked-up copy of the instructions for review and editing later this weekend. Cheers, Ramesh.
Fantastic, thanks Ramesh. And thanks also to everyone involved as I am certain there is loads of hard work going on in the background that only a very few will be aware of. Just so you all know, it really is appreciated! Cheers, Matt 2008/10/11 Ramesh Dhami (VA3UV) <Ramesh@va3uv.com>
Matt Beasant wrote:
Now, who can tell me how to get IRLP working? Please?
<-- Hi Matt; I was just talking to Jim about the chan_irlp documentation this morning... as I mentioned last night, hang tight, I'll be sending Jim a marked-up copy of the instructions for review and editing later this weekend.
Cheers,
Ramesh. _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
If thats the case, then youre not running the latest version of app_rpt. That will not happen in the latest versions. Date: Sat, 11 Oct 2008 16:06:17 +0100 From: g4rky@yahoo.co.uk To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] Problems with Echolink on app_rpt Hi Steve and thanks for the reply. After much messing about - and learning in the porcess of course - I've fixed it! The context [radio-secure] in the example given in the instructions at http://app-rpt.qrvc.com/echolink.html where it tells you what to put in your extensions.conf file may be incorrect. I had the following in there and it didnt work for incoming calls: [radio-secure] exten => ${2250},1,rpt,${2250} I replaced it with: [echolink-in] exten => 2250,1,rpt(2250|X) and commented out the reference to [radio-secure] in my Echolink.conf file and added one at the end for [echolink-in] and everything is now working, both in and out! Clearly I can see the differebetween the two statements but being a real Asterisk newbie, it really means nothing to me so I dont know what the effect of the wrong statement would be! Sorry to be so vague but I have now got it all working, so thank you for replying. Now, who can tell me how to get IRLP working? Please? Thanks everyone and have a great weekend Kind regards, Matt G4RKY Node 2250 & 2237 2008/10/11 <hwstar@rodgers.sdcoxmail.com> Matt, If you followed the instructions is the ACID sysadmin manual, everything should be fine. Since database show is working, most of it is up and running. You might want to post your echolink.conf file with rhe password obiliterated to the list so that we can see if it is ok. If you try to connect before everyone gets an updated list the connection will fail. Please try after about an hour so that everyone gets a list with your node in it. Something else to check: Is your node showing up on echolink.org? Finally, don't worry about this message:
WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13'
Steve WA6ZFT
From: "Matt Beasant" <g4rky@yahoo.co.uk>
Date: 2008/10/11 Sat AM 01:55:47 PDT To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> Subject: [App_rpt] Problems with Echolink on app_rpt
Dear all,
I've upgraded my node to the latest release and have attempted to get Echolink working on my node.
However, I'm having problems and wondered if anyone could point me in the
right direction for a fix?
When I try to make an outgoing call from my node to an echolink node, I instantly get the "node connection failed" message.
On the CLI, the announcement text is immediately preceeded by:
WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13'
When I try to make a call IN to my node form an Echolink node, I see:
ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for
a/ipaddr/81.156.xxx.xxx
However, I do frequently see messages such as:
NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink server europe.echolink.org
and the database show command works fine also.
Do I need to follow these instructions here : http://app-rpt.qrvc.com/echolink.html or is my node already up to date
enough to not have to do this?
I also noted the existence of an IRLP config file in the config examples - I need IRLP functionality on my node and so is this something I can use too?
Thanks in advance for any and all help received!
Kind regards,
Matt G4RKY node 2250 & 2237
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
By removing the radio-secure context you have now broken your incoming allstarlink connectivity. The problem is the fact that there is a dollar sign and curly braces around the node number 2250!! Restore the old radio-secure context and get rid of the dollar sign and curly braces, then change the context back to radio-secure in echolink.conf and everything should be ok. Steve WA6ZFT Jim Duuuude wrote:
If thats the case, then youre not running the latest version of app_rpt. That will not happen in the latest versions.
Date: Sat, 11 Oct 2008 16:06:17 +0100 From: g4rky@yahoo.co.uk To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] Problems with Echolink on app_rpt
Hi Steve and thanks for the reply.
After much messing about - and learning in the porcess of course - I've fixed it!
The context [radio-secure] in the example given in the instructions at http://app-rpt.qrvc.com/echolink.html where it tells you what to put in your extensions.conf file may be incorrect.
I had the following in there and it didnt work for incoming calls:
[radio-secure] exten => ${2250},1,rpt,${2250} I replaced it with:
[echolink-in] exten => 2250,1,rpt(2250|X) and commented out the reference to [radio-secure] in my Echolink.conf file and added one at the end for [echolink-in] and everything is now working, both in and out!
Clearly I can see the differebetween the two statements but being a real Asterisk newbie, it really means nothing to me so I dont know what the effect of the wrong statement would be!
Sorry to be so vague but I have now got it all working, so thank you for replying.
Now, who can tell me how to get IRLP working? Please?
Thanks everyone and have a great weekend
Kind regards,
Matt G4RKY Node 2250 & 2237
2008/10/11 <hwstar@rodgers.sdcoxmail.com>
Matt,
If you followed the instructions is the ACID sysadmin manual, everything should be fine. Since database show
is working, most of it is up and running. You might want to post your echolink.conf file with rhe password obiliterated to the list so that we can see if it is ok.
If you try to connect before everyone gets an updated list
the connection will fail. Please try after about an hour so that everyone gets a list with your node in it.
Something else to check: Is your node showing up on echolink.org?
Finally, don't worry about this message:
WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13'
Steve WA6ZFT
From: "Matt Beasant" <g4rky@yahoo.co.uk>
Date: 2008/10/11 Sat AM 01:55:47 PDT To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> Subject: [App_rpt] Problems with Echolink on app_rpt
Dear all,
I've upgraded my node to the latest release and have attempted to get Echolink working on my node.
However, I'm having problems and wondered if anyone could point me in the
right direction for a fix?
When I try to make an outgoing call from my node to an echolink node, I instantly get the "node connection failed" message.
On the CLI, the announcement text is immediately preceeded by:
WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13'
When I try to make a call IN to my node form an Echolink node, I see:
ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for
a/ipaddr/81.156.xxx.xxx
However, I do frequently see messages such as:
NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink server europe.echolink.org
and the database show command works fine also.
Do I need to follow these instructions here : http://app-rpt.qrvc.com/echolink.html or is my node already up to date
enough to not have to do this?
I also noted the existence of an IRLP config file in the config examples - I need IRLP functionality on my node and so is this something I can use too?
Thanks in advance for any and all help received!
Kind regards,
Matt G4RKY node 2250 & 2237
_______________________________________________
App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Hi Steve, Sorry, just seen your other email - I did try the instructions in the ACID sys admin guide, my version dated 10/05/2008. In fact this part of the guide makes no mention of the fact you need to add a line into extensions.conf - perhaps I missed a page but the next page in my guide is Appendix A and lists the references . After a pointer from Ramesh, I found the other guide and then, searched the message archive I found the earlier messages which had this different text in the extensions.conf, so I gave it a try and it worked! Is there a bit missing from the Admin guide? Best wishes, Matt 2008/10/11 <hwstar@rodgers.sdcoxmail.com> > Matt, > > If you followed the instructions is the ACID sysadmin manual, everything > should be fine. Since database show > is working, most of it is up and running. You might want to post your > echolink.conf file with rhe password obiliterated > to the list so that we can see if it is ok. > > If you try to connect before everyone gets an updated list > the connection will fail. Please try after about an hour > so that everyone gets a list with your node in it. > > Something else to check: Is your node showing up on echolink.org? > > Finally, don't worry about this message: > > > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass > '13' > > Steve > WA6ZFT > > > > > > > > From: "Matt Beasant" <g4rky@yahoo.co.uk> > > Date: 2008/10/11 Sat AM 01:55:47 PDT > > To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> > > Subject: [App_rpt] Problems with Echolink on app_rpt > > > > Dear all, > > > > I've upgraded my node to the latest release and have attempted to get > > Echolink working on my node. > > > > However, I'm having problems and wondered if anyone could point me in the > > right direction for a fix? > > > > When I try to make an outgoing call from my node to an echolink node, I > > instantly get the "node connection failed" message. > > > > On the CLI, the announcement text is immediately preceeded by: > > > > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass > '13' > > > > When I try to make a call IN to my node form an Echolink node, I see: > > > > ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for > > a/ipaddr/81.156.xxx.xxx > > > > However, I do frequently see messages such as: > > > > NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink > server > > europe.echolink.org > > > > and the database show command works fine also. > > > > Do I need to follow these instructions here : > > http://app-rpt.qrvc.com/echolink.html or is my node already up to date > > enough to not have to do this? > > > > I also noted the existence of an IRLP config file in the config examples > - I > > need IRLP functionality on my node and so is this something I can use > too? > > > > Thanks in advance for any and all help received! > > > > Kind regards, > > > > Matt > > G4RKY > > node 2250 & 2237 > > > > > > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > > > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > >
If the context is properly formatted in extensions.conf, extensions.conf does not need to change. See my post on your future comment. Steve WA6ZFT Matt Beasant wrote: > Hi Steve, > > Sorry, just seen your other email - I did try the instructions in the ACID > sys admin guide, my version dated 10/05/2008. > > In fact this part of the guide makes no mention of the fact you need to add > a line into extensions.conf - perhaps I missed a page but the next page in > my guide is Appendix A and lists the references . After a pointer from > Ramesh, I found the other guide and then, searched the message archive I > found the earlier messages which had this different text in the > extensions.conf, so I gave it a try and it worked! > > Is there a bit missing from the Admin guide? > > Best wishes, > > Matt > > 2008/10/11 <hwstar@rodgers.sdcoxmail.com> > >> Matt, >> >> If you followed the instructions is the ACID sysadmin manual, everything >> should be fine. Since database show >> is working, most of it is up and running. You might want to post your >> echolink.conf file with rhe password obiliterated >> to the list so that we can see if it is ok. >> >> If you try to connect before everyone gets an updated list >> the connection will fail. Please try after about an hour >> so that everyone gets a list with your node in it. >> >> Something else to check: Is your node showing up on echolink.org? >> >> Finally, don't worry about this message: >> >>> WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass >> '13' >> >> Steve >> WA6ZFT >> >> >> >> >>> From: "Matt Beasant" <g4rky@yahoo.co.uk> >>> Date: 2008/10/11 Sat AM 01:55:47 PDT >>> To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> >>> Subject: [App_rpt] Problems with Echolink on app_rpt >> > >>> Dear all, >>> >>> I've upgraded my node to the latest release and have attempted to get >>> Echolink working on my node. >>> >>> However, I'm having problems and wondered if anyone could point me in the >>> right direction for a fix? >>> >>> When I try to make an outgoing call from my node to an echolink node, I >>> instantly get the "node connection failed" message. >>> >>> On the CLI, the announcement text is immediately preceeded by: >>> >>> WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass >> '13' >>> When I try to make a call IN to my node form an Echolink node, I see: >>> >>> ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for >>> a/ipaddr/81.156.xxx.xxx >>> >>> However, I do frequently see messages such as: >>> >>> NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink >> server >>> europe.echolink.org >>> >>> and the database show command works fine also. >>> >>> Do I need to follow these instructions here : >>> http://app-rpt.qrvc.com/echolink.html or is my node already up to date >>> enough to not have to do this? >>> >>> I also noted the existence of an IRLP config file in the config examples >> - I >>> need IRLP functionality on my node and so is this something I can use >> too? >>> Thanks in advance for any and all help received! >>> >>> Kind regards, >>> >>> Matt >>> G4RKY >>> node 2250 & 2237 >>> >>> >> _______________________________________________ >> App_rpt mailing list >> App_rpt@lists.illiana.net >> http://lists.illiana.net/mailman/listinfo/app_rpt >> >> >> _______________________________________________ >> App_rpt mailing list >> App_rpt@lists.illiana.net >> http://lists.illiana.net/mailman/listinfo/app_rpt >> >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt
participants (5)
-
hwstar＠rodgers.sdcoxmail.com -
Jim Duuuude -
Matt Beasant -
Ramesh Dhami (VA3UV) -
Stephen Rodgers