11 Oct
2008
11 Oct
'08
3:14 p.m.
Hi Steve, Sorry, just seen your other email - I did try the instructions in the ACID sys admin guide, my version dated 10/05/2008. In fact this part of the guide makes no mention of the fact you need to add a line into extensions.conf - perhaps I missed a page but the next page in my guide is Appendix A and lists the references . After a pointer from Ramesh, I found the other guide and then, searched the message archive I found the earlier messages which had this different text in the extensions.conf, so I gave it a try and it worked! Is there a bit missing from the Admin guide? Best wishes, Matt 2008/10/11 <hwstar@rodgers.sdcoxmail.com> > Matt, > > If you followed the instructions is the ACID sysadmin manual, everything > should be fine. Since database show > is working, most of it is up and running. You might want to post your > echolink.conf file with rhe password obiliterated > to the list so that we can see if it is ok. > > If you try to connect before everyone gets an updated list > the connection will fail. Please try after about an hour > so that everyone gets a list with your node in it. > > Something else to check: Is your node showing up on echolink.org? > > Finally, don't worry about this message: > > > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass > '13' > > Steve > WA6ZFT > > > > > > > > From: "Matt Beasant" <g4rky@yahoo.co.uk> > > Date: 2008/10/11 Sat AM 01:55:47 PDT > > To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> > > Subject: [App_rpt] Problems with Echolink on app_rpt > > > > Dear all, > > > > I've upgraded my node to the latest release and have attempted to get > > Echolink working on my node. > > > > However, I'm having problems and wondered if anyone could point me in the > > right direction for a fix? > > > > When I try to make an outgoing call from my node to an echolink node, I > > instantly get the "node connection failed" message. > > > > On the CLI, the announcement text is immediately preceeded by: > > > > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass > '13' > > > > When I try to make a call IN to my node form an Echolink node, I see: > > > > ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for > > a/ipaddr/81.156.xxx.xxx > > > > However, I do frequently see messages such as: > > > > NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink > server > > europe.echolink.org > > > > and the database show command works fine also. > > > > Do I need to follow these instructions here : > > http://app-rpt.qrvc.com/echolink.html or is my node already up to date > > enough to not have to do this? > > > > I also noted the existence of an IRLP config file in the config examples > - I > > need IRLP functionality on my node and so is this something I can use > too? > > > > Thanks in advance for any and all help received! > > > > Kind regards, > > > > Matt > > G4RKY > > node 2250 & 2237 > > > > > > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > > > _______________________________________________ > App_rpt mailing list > App_rpt@lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt > >