Question regarding echolink setup
I am new to Allstar and am attempting to get the echolink node ID/PSWD combination to work. It works as I can bring up Echolink in sysop mode under the profile for the repeater. I believe I configured it correctly in the setup on the Allstarlink website and in the setup on the local node as well. I am not sure where to look or what else I might need to do to get the echolink aspect up and running, any direction would be great. Thanks, 73, Greg, W2GCM
Your repeater is logged into Echolink. See http://echolink.org/logins.jsp and search for your call sign or node number (977591). What more are you expecting? Thanks, Bob kk6ecm Sent from iPad
On Jan 26, 2016, at 3:27 PM, Greg Mohr <Greg@gmohr.com> wrote:
I am new to Allstar and am attempting to get the echolink node ID/PSWD combination to work. It works as I can bring up Echolink in sysop mode under the profile for the repeater. I believe I configured it correctly in the setup on the Allstarlink website and in the setup on the local node as well. I am not sure where to look or what else I might need to do to get the echolink aspect up and running, any direction would be great.
Thanks,
73, Greg, W2GCM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
If you have been testing this and not seeing it work, Know that you can only have one connection per ip address no matter the type/callsign. You may need to log-out from your desktop if your app_rpt is on the same ip. And you 'may' need to restart app_rpt after doing so. It can take a few minutes for it to registrar. Perhaps that will lead you somewhere. ...mike/kb8jnm
I am new to Allstar and am attempting to get the echolink node ID/PSWD combination to work. It works as I can bring up Echolink in sysop mode under the profile for the repeater. I believe I configured it correctly in the setup on the Allstarlink website and in the setup on the local node as well. I am not sure where to look or what else I might need to do to get the echolink aspect up and running, any direction would be great.
Thanks,
73, Greg, W2GCM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Greg Mohr -
kk6ecm -
mike＠midnighteng.com