If you have been testing this and not seeing it work, Know that you can only have one connection per ip address no matter the type/callsign. You may need to log-out from your desktop if your app_rpt is on the same ip. And you 'may' need to restart app_rpt after doing so. It can take a few minutes for it to registrar. Perhaps that will lead you somewhere. ...mike/kb8jnm
I am new to Allstar and am attempting to get the echolink node ID/PSWD combination to work. It works as I can bring up Echolink in sysop mode under the profile for the repeater. I believe I configured it correctly in the setup on the Allstarlink website and in the setup on the local node as well. I am not sure where to look or what else I might need to do to get the echolink aspect up and running, any direction would be great.
Thanks,
73, Greg, W2GCM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.