Hi Steve, Thanks for the reply. Could it be my IAX2 is not registering properly??? e.g *CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N A2534 <Unregistered> 60 Request Sent Any ideas why this would not be the case? Would the DNS you mentioned problem cause this? I have setup my router to divert all incoming traffic to the asterisk server just in case but it makes no difference.. regards Anthony VK2ACP On Sun, Jan 17, 2010 at 8:15 AM, Stephen Rodgers <sales@qrvc.com> wrote:

Anthony Percy wrote:

...

Hi all, I just fired up my test node and when I try to get a node list I get the following error when I turn verbose mode on..

/usr/bin/wget -v -O /var/lib/asterisk/rpt_extnodes-temp http://nodes1.allstarlink.org/cgi-bin/nodes.pl --2010-01-16 21:09:39-- http://nodes1.allstarlink.org/cgi-bin/nodes.pl Resolving nodes1.allstarlink.org... 64.62.228.97 Connecting to nodes1.allstarlink.org|64.62.228.97|:80... connected. HTTP request sent, awaiting response... 500 Internal Server Error 2010-01-16 21:09:40 ERROR 500: Internal Server Error.

I have checked and my registration password is OK for node 27010...

Regards

Anthony VK2ACP

------------------------------------------------------------------------

_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users

With all our domain names down due to a problem with our DNS provider, I can't see what is going on at the moment. The problem may not be on your end due to this issue.