I hadn't played in that area of the kernel config in a really long time. I try and keep that stuff set to defaults. The only thing I changed was the processor type to xeon. There are so many options in there! The internal timer was set to 250hz.. recompiling now. I will stop by the tower site this evening and try it out. I bet that will fix it. Thanks, Don
To: w9drr@live.com Subject: Re: [App_rpt-users] mr roboto From: jjudge@uci.edu Date: Mon, 4 May 2009 14:19:05 +0000
I had that same issue with a 2.6.26 debian kernel. Zaptel needs a 1 kHz internal timing source (2.6 kernels have one built in) but some distros (debian and, apparently, gentoo, too) come set at a lower freq by default. Assuming this is the issue, and it sounds like it is, you'll have to recompile your kernel with the 1 kHz setting. In the kernel source's menuconfig the setting is under processor type and features.
Good luck! Jamison KI6VCE Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Don Russell <w9drr@live.com>
Date: Mon, 4 May 2009 09:02:53 To: <app_rpt-users@qrvc.com> Subject: [App_rpt-users] mr roboto
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_________________________________________________________________ Hotmail® goes with you. http://windowslive.com/Tutorial/Hotmail/Mobile?ocid=TXT_TAGLM_WL_HM_Tutorial...
Are you using a Dell system by chance? I had this very same issue on a Dell server that I was originally running it on, I have since moved on to an embedded system and the problem went away... I put some notes up here concerning this: http://www.k1lnx.net/wiki/index.php/App_RPT/TIARA Never did figure out what the deal was, but when I moved to the embedded system it worked with the stock kernel. Hope that helps... 73 Stephen K1LNX On Mon, May 4, 2009 at 11:12 AM, Don Russell <w9drr@live.com> wrote:
I hadn't played in that area of the kernel config in a really long time. I try and keep that stuff set to defaults. The only thing I changed was the processor type to xeon. There are so many options in there!
The internal timer was set to 250hz.. recompiling now. I will stop by the tower site this evening and try it out. I bet that will fix it.
Thanks, Don
To: w9drr@live.com Subject: Re: [App_rpt-users] mr roboto From: jjudge@uci.edu Date: Mon, 4 May 2009 14:19:05 +0000
I had that same issue with a 2.6.26 debian kernel. Zaptel needs a 1 kHz internal timing source (2.6 kernels have one built in) but some distros (debian and, apparently, gentoo, too) come set at a lower freq by default. Assuming this is the issue, and it sounds like it is, you'll have to recompile your kernel with the 1 kHz setting. In the kernel source's menuconfig the setting is under processor type and features.
Good luck! Jamison KI6VCE Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Don Russell <w9drr@live.com>
Date: Mon, 4 May 2009 09:02:53 To: <app_rpt-users@qrvc.com> Subject: [App_rpt-users] mr roboto
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
------------------------------ Hotmail® goes with you. Get it on your BlackBerry or iPhone.<http://windowslive.com/Tutorial/Hotmail/Mobile?ocid=TXT_TAGLM_WL_HM_Tutorial_Mobile1_052009>
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Stephen Brown - ARS K1LNX Johnson City, TN EM86 http://www.k1lnx.net
Im not sure what the problem is, but I *HAD* to say domo arigato, mr. robato :) Date: Mon, 4 May 2009 12:02:54 -0400 From: k1lnx@k1lnx.net To: w9drr@live.com CC: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] mr roboto Are you using a Dell system by chance? I had this very same issue on a Dell server that I was originally running it on, I have since moved on to an embedded system and the problem went away... I put some notes up here concerning this: http://www.k1lnx.net/wiki/index.php/App_RPT/TIARA Never did figure out what the deal was, but when I moved to the embedded system it worked with the stock kernel. Hope that helps... 73 Stephen K1LNX On Mon, May 4, 2009 at 11:12 AM, Don Russell <w9drr@live.com> wrote: I hadn't played in that area of the kernel config in a really long time. I try and keep that stuff set to defaults. The only thing I changed was the processor type to xeon. There are so many options in there! The internal timer was set to 250hz.. recompiling now. I will stop by the tower site this evening and try it out. I bet that will fix it. Thanks, Don
To: w9drr@live.com
Subject: Re: [App_rpt-users] mr roboto From: jjudge@uci.edu Date: Mon, 4 May 2009 14:19:05 +0000
I had that same issue with a 2.6.26 debian kernel. Zaptel needs a 1 kHz internal timing source (2.6 kernels have one built in) but some distros (debian and, apparently, gentoo, too) come set at a lower freq by default. Assuming this is the issue, and it sounds like it is, you'll have to recompile your kernel with the 1 kHz setting. In the kernel source's menuconfig the setting is under processor type and features.
Good luck! Jamison KI6VCE Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Don Russell <w9drr@live.com>
Date: Mon, 4 May 2009 09:02:53 To: <app_rpt-users@qrvc.com> Subject: [App_rpt-users] mr roboto
_______________________________________________
App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Hotmail® goes with you. Get it on your BlackBerry or iPhone. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users -- Stephen Brown - ARS K1LNX Johnson City, TN EM86 http://www.k1lnx.net
it was the kernel timer.. working fine on the dual xeon now. the kernel default was 250hz not 1000. did a quick rebuild reboot and its up fine. Don W9DRR From: telesistant@hotmail.com To: k1lnx@k1lnx.net; w9drr@live.com CC: app_rpt-users@qrvc.com Subject: RE: [App_rpt-users] mr roboto Date: Mon, 4 May 2009 11:28:08 -0700 Im not sure what the problem is, but I *HAD* to say domo arigato, mr. robato :) Date: Mon, 4 May 2009 12:02:54 -0400 From: k1lnx@k1lnx.net To: w9drr@live.com CC: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] mr roboto Are you using a Dell system by chance? I had this very same issue on a Dell server that I was originally running it on, I have since moved on to an embedded system and the problem went away... I put some notes up here concerning this: http://www.k1lnx.net/wiki/index.php/App_RPT/TIARA Never did figure out what the deal was, but when I moved to the embedded system it worked with the stock kernel. Hope that helps... 73 Stephen K1LNX On Mon, May 4, 2009 at 11:12 AM, Don Russell <w9drr@live.com> wrote: I hadn't played in that area of the kernel config in a really long time. I try and keep that stuff set to defaults. The only thing I changed was the processor type to xeon. There are so many options in there! The internal timer was set to 250hz.. recompiling now. I will stop by the tower site this evening and try it out. I bet that will fix it. Thanks, Don
To: w9drr@live.com
Subject: Re: [App_rpt-users] mr roboto From: jjudge@uci.edu Date: Mon, 4 May 2009 14:19:05 +0000
I had that same issue with a 2.6.26 debian kernel. Zaptel needs a 1 kHz internal timing source (2.6 kernels have one built in) but some distros (debian and, apparently, gentoo, too) come set at a lower freq by default. Assuming this is the issue, and it sounds like it is, you'll have to recompile your kernel with the 1 kHz setting. In the kernel source's menuconfig the setting is under processor type and features.
Good luck! Jamison KI6VCE Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Don Russell <w9drr@live.com>
Date: Mon, 4 May 2009 09:02:53 To: <app_rpt-users@qrvc.com> Subject: [App_rpt-users] mr roboto
_______________________________________________
App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Hotmail® goes with you. Get it on your BlackBerry or iPhone. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users -- Stephen Brown - ARS K1LNX Johnson City, TN EM86 http://www.k1lnx.net _________________________________________________________________ Hotmail® goes with you. http://windowslive.com/Tutorial/Hotmail/Mobile?ocid=TXT_TAGLM_WL_HM_Tutorial...
What exactly did you change? ----- Original Message ----- From: Don Russell To: app_rpt users list Sent: Monday, May 04, 2009 3:48 PM Subject: Re: [App_rpt-users] mr roboto it was the kernel timer.. working fine on the dual xeon now. the kernel default was 250hz not 1000. did a quick rebuild reboot and its up fine. Don W9DRR ------------------------------------------------------------------------------ From: telesistant@hotmail.com To: k1lnx@k1lnx.net; w9drr@live.com CC: app_rpt-users@qrvc.com Subject: RE: [App_rpt-users] mr roboto Date: Mon, 4 May 2009 11:28:08 -0700 Im not sure what the problem is, but I *HAD* to say domo arigato, mr. robato :) ------------------------------------------------------------------------------ Date: Mon, 4 May 2009 12:02:54 -0400 From: k1lnx@k1lnx.net To: w9drr@live.com CC: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] mr roboto Are you using a Dell system by chance? I had this very same issue on a Dell server that I was originally running it on, I have since moved on to an embedded system and the problem went away... I put some notes up here concerning this: http://www.k1lnx.net/wiki/index.php/App_RPT/TIARA Never did figure out what the deal was, but when I moved to the embedded system it worked with the stock kernel. Hope that helps... 73 Stephen K1LNX On Mon, May 4, 2009 at 11:12 AM, Don Russell <w9drr@live.com> wrote: I hadn't played in that area of the kernel config in a really long time. I try and keep that stuff set to defaults. The only thing I changed was the processor type to xeon. There are so many options in there! The internal timer was set to 250hz.. recompiling now. I will stop by the tower site this evening and try it out. I bet that will fix it. Thanks, Don > To: w9drr@live.com > Subject: Re: [App_rpt-users] mr roboto > From: jjudge@uci.edu > Date: Mon, 4 May 2009 14:19:05 +0000 > > I had that same issue with a 2.6.26 debian kernel. Zaptel needs a 1 kHz internal timing source (2.6 kernels have one built in) but some distros (debian and, apparently, gentoo, too) come set at a lower freq by default. Assuming this is the issue, and it sounds like it is, you'll have to recompile your kernel with the 1 kHz setting. In the kernel source's menuconfig the setting is under processor type and features. > > Good luck! > Jamison KI6VCE > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- > From: Don Russell <w9drr@live.com> > > Date: Mon, 4 May 2009 09:02:53 > To: <app_rpt-users@qrvc.com> > Subject: [App_rpt-users] mr roboto > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users > > ---------------------------------------------------------------------------- Hotmail® goes with you. Get it on your BlackBerry or iPhone. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users -- Stephen Brown - ARS K1LNX Johnson City, TN EM86 http://www.k1lnx.net ------------------------------------------------------------------------------ Hotmail® goes with you. Get it on your BlackBerry or iPhone. ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Sorry, I responded to Don's email yesterday but accidentally replied to only him and not the list. In case anyone else has this problem you need to recompile your linux kernel with the option of having the timer freq set at 1 kHz, which is what zaptel needs and is expecting. Some distros come set at 1 kHz default (centos), but others (ie debian and gentoo) come with a different default setting. To change this, when you're recompiling, in the make menuconfig utility look under processor type and features and change timer frequency to 1000. Sent from my Verizon Wireless BlackBerry -----Original Message----- From: "Scott Weis" <kb2ear@kb2ear.net> Date: Tue, 5 May 2009 11:50:34 To: Don Russell<w9drr@live.com>; app_rpt users list<app_rpt-users@qrvc.com> Subject: Re: [App_rpt-users] mr roboto _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Cooool! So you made an Allstar node sound like Dstar huh? Wow! Heh heh heh.... Matt 2009/5/4 Jim Duuuude <telesistant@hotmail.com>
Im not sure what the problem is, but I *HAD* to say
domo arigato, mr. robato
:)
------------------------------ Date: Mon, 4 May 2009 12:02:54 -0400 From: k1lnx@k1lnx.net To: w9drr@live.com CC: app_rpt-users@qrvc.com
Subject: Re: [App_rpt-users] mr roboto
Are you using a Dell system by chance? I had this very same issue on a Dell server that I was originally running it on, I have since moved on to an embedded system and the problem went away...
I put some notes up here concerning this: http://www.k1lnx.net/wiki/index.php/App_RPT/TIARA
Never did figure out what the deal was, but when I moved to the embedded system it worked with the stock kernel.
Hope that helps... 73 Stephen K1LNX
On Mon, May 4, 2009 at 11:12 AM, Don Russell <w9drr@live.com> wrote:
I hadn't played in that area of the kernel config in a really long time. I try and keep that stuff set to defaults. The only thing I changed was the processor type to xeon. There are so many options in there!
The internal timer was set to 250hz.. recompiling now. I will stop by the tower site this evening and try it out. I bet that will fix it.
Thanks, Don
To: w9drr@live.com Subject: Re: [App_rpt-users] mr roboto From: jjudge@uci.edu Date: Mon, 4 May 2009 14:19:05 +0000
I had that same issue with a 2.6.26 debian kernel. Zaptel needs a 1 kHz internal timing source (2.6 kernels have one built in) but some distros (debian and, apparently, gentoo, too) come set at a lower freq by default. Assuming this is the issue, and it sounds like it is, you'll have to recompile your kernel with the 1 kHz setting. In the kernel source's menuconfig the setting is under processor type and features.
Good luck! Jamison KI6VCE Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Don Russell <w9drr@live.com>
Date: Mon, 4 May 2009 09:02:53 To: <app_rpt-users@qrvc.com> Subject: [App_rpt-users] mr roboto
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
------------------------------ Hotmail® goes with you. Get it on your BlackBerry or iPhone.<http://windowslive.com/Tutorial/Hotmail/Mobile?ocid=TXT_TAGLM_WL_HM_Tutorial_Mobile1_052009>
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Stephen Brown - ARS K1LNX Johnson City, TN EM86 http://www.k1lnx.net
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
participants (6)
-
Don Russell -
Jamison Judge -
Jim Duuuude -
Matt Beasant -
Scott Weis -
Stephen - K1LNX