What exactly did you change? ----- Original Message ----- From: Don Russell To: app_rpt users list Sent: Monday, May 04, 2009 3:48 PM Subject: Re: [App_rpt-users] mr roboto it was the kernel timer.. working fine on the dual xeon now. the kernel default was 250hz not 1000. did a quick rebuild reboot and its up fine. Don W9DRR ------------------------------------------------------------------------------ From: telesistant@hotmail.com To: k1lnx@k1lnx.net; w9drr@live.com CC: app_rpt-users@qrvc.com Subject: RE: [App_rpt-users] mr roboto Date: Mon, 4 May 2009 11:28:08 -0700 Im not sure what the problem is, but I *HAD* to say domo arigato, mr. robato :) ------------------------------------------------------------------------------ Date: Mon, 4 May 2009 12:02:54 -0400 From: k1lnx@k1lnx.net To: w9drr@live.com CC: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] mr roboto Are you using a Dell system by chance? I had this very same issue on a Dell server that I was originally running it on, I have since moved on to an embedded system and the problem went away... I put some notes up here concerning this: http://www.k1lnx.net/wiki/index.php/App_RPT/TIARA Never did figure out what the deal was, but when I moved to the embedded system it worked with the stock kernel. Hope that helps... 73 Stephen K1LNX On Mon, May 4, 2009 at 11:12 AM, Don Russell <w9drr@live.com> wrote: I hadn't played in that area of the kernel config in a really long time. I try and keep that stuff set to defaults. The only thing I changed was the processor type to xeon. There are so many options in there! The internal timer was set to 250hz.. recompiling now. I will stop by the tower site this evening and try it out. I bet that will fix it. Thanks, Don > To: w9drr@live.com > Subject: Re: [App_rpt-users] mr roboto > From: jjudge@uci.edu > Date: Mon, 4 May 2009 14:19:05 +0000 > > I had that same issue with a 2.6.26 debian kernel. Zaptel needs a 1 kHz internal timing source (2.6 kernels have one built in) but some distros (debian and, apparently, gentoo, too) come set at a lower freq by default. Assuming this is the issue, and it sounds like it is, you'll have to recompile your kernel with the 1 kHz setting. In the kernel source's menuconfig the setting is under processor type and features. > > Good luck! > Jamison KI6VCE > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- > From: Don Russell <w9drr@live.com> > > Date: Mon, 4 May 2009 09:02:53 > To: <app_rpt-users@qrvc.com> > Subject: [App_rpt-users] mr roboto > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users > > ---------------------------------------------------------------------------- Hotmail® goes with you. Get it on your BlackBerry or iPhone. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users -- Stephen Brown - ARS K1LNX Johnson City, TN EM86 http://www.k1lnx.net ------------------------------------------------------------------------------ Hotmail® goes with you. Get it on your BlackBerry or iPhone. ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users