Go to the Asterisk CLI by typing “asterisk -rvvv”. Then give your command and watch the CLI as you do. On Jul 16, 2014, at 5:43 PM, W2YMM <w2ymm1@gmail.com> wrote:

I had this feature setup a few months ago and everything seemed to work ok. I tried it today and it is no longer working. Where can I investigate the error log files to see what may have happened ?

I use it to page a Motorola portable radio using Quick Call Paging. 887=cop,48,!2688.0/1000,!1130.5/3000 ; Send two tone paging sequence

When I enter the code to transmit the signal, there is no tones produced. I have tried it with different radios as well as via the iaxRpt program.

Thanks for any help

Bob W2YMM

Robert Prybyzerski Jr W2YMM 631-960-1051 http://www.w2ymm.com Allstar 28183,29973 IRLP 4265 Echolink 1224

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.