I would suggest that you look at the method of PTT trigger and if the transistor can keep up with the current drain of the PTT on the radio. Test without the radio and use a LED for indicator. If it works fine on the LED, then buffer up with a bigger transistor. That is a good starting place anyway. Second, I would look for RF in the lines. If not, provide more info. ...mike/kb8jnm

I'm using remote base and seems that when I key up with my HT the remote base transmits and then receives, transits and then receives. I think it's in the settings, but I don't know. For the radio im using a tyt-9000. Does anyone have this problem?? Thanks Erik Kc9wry ---------- Forwarded message ---------- From: "Jesse Lloyd" <ve7lyd@gmail.com> Date: Sep 3, 2015 1:58 PM Subject: [App_rpt-users] Stuck Tx on System To: "app_rpt" <app_rpt-users@ohnosec.org> Cc:

Hi All,

I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition.

Any thoughts on how I should troubleshoot this?

Thx,

Jesse

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.