I'm using remote base and seems that when I key up with my HT the remote base transmits and then receives, transits and then receives. I think it's in the settings, but I don't know. For the radio im using a tyt-9000. Does anyone have this problem?? Thanks Erik Kc9wry ---------- Forwarded message ---------- From: "Jesse Lloyd" <ve7lyd@gmail.com> Date: Sep 3, 2015 1:58 PM Subject: [App_rpt-users] Stuck Tx on System To: "app_rpt" <app_rpt-users@ohnosec.org> Cc: Hi All, I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition. Any thoughts on how I should troubleshoot this? Thx, Jesse _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.