It seems I'm making some head way. The last testing before I called it quits tonight I was getting "The number you dialled is not in service followed by busy signal. some times just the busy signal. I have enabled "DTMF" on the debug logs. It appears that the system doesn't like all the key pad numbers on all of my radios. different ones certain keys don't show up in the log. More work later this week in the evenings. Thank you for your help. Mike -- *"We * *Message: 1 Date: Sun, 11 Jan 2015 13:07:57 -0500 From: Doug Crompton <doug@crompton.com <doug@crompton.com>> To: Mike Lussier <mike.lussier@gmail.com <mike.lussier@gmail.com>> Cc: "app_rpt-users@ohnosec.org <app_rpt-users@ohnosec.org>" <app_rpt-users@ohnosec.org <app_rpt-users@ohnosec.org>> Subject: Re: [App_rpt-users] what am I missing ? Message-ID: <BLU172-* W3882F8780314544B8F9040BA420@phx.gbl> Content-Type: text/plain; charset="iso-8859-1" Mike, When you do this you should have the client open and watch the log. Much info can be gained there. 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Sun, 11 Jan 2015 10:53:33 -0500 From: mike.lussier@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] what am I missing ? I stepped away from this last night. I was getting frustrated. What I'm trying to do. dial via DTMF from radio and route the call to the local PBX in my home. I already have a Trunk established between the PBX and the BBB Node. I can place calls directly to the node, TX & RX. When I initiate a call to the phone from my HT the only response I get back is a courtesy tone. I have tried all of these combinations. *6 6001 # *6 6001 6 6001 # 6 6001 There is an IAX2 trunk from the PBX to the BBB AllStar node running 1.2.1. I can place a call to the node from the phone. I can transmit & receive. on the BBB node : I setup my test phone extension 6001 in iax.cnf file on the node the dial command is different dial=iax/6001 [6001] deny=0.0.0.0/0.0.0.0 username=6001 secret=xxxx dtmfmode=rfc2833 canreinvite=no context=radio-control host=dynamic trustrpid=yes sendrpid=no type=peer nat=no port=5060 qualify=yes qualifyfreq=60 transport=udp encryption=no callgroup=RPT pickupgroup=ALL dial=IAX6001 permit=0.0.0.0/0.0.0.0 allow=ulaw,gsm,h263 ======= rpt.conf 6=autopatchup,noct=1,farenddisconnect=1,dialtime=40000 ; Autopatch up ======= In extensions.conf the phone patch is the [RADIO] context [radio] exten => _5XXX,1,Dial(iax/${EXTEN},17); ; home phones exten => _6XXX,1,Dial(iax/${EXTEN},17); ; mesh phones *must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*