Has anyone gotten these settings to work ? irplann = 0 ; Default: 1 = Play irlp connect and disconnect announcements ; 0 = Disable irlp connect and disconnect announcements eannmode = 0 ; 0 = do not announce Echolink nodes at all, ; 1 = announce only the node number (Allstar-translated), ; 2 = announce only the call of the echolink station, ; 3 = announce both Paul M. Nannery Ham: KC2VRJ GMRS: WQBC441
yeah, whats the problem? From: kc2vrj@gmail.com To: app_rpt-users@qrvc.com Date: Thu, 24 Jun 2010 11:22:34 -0400 Subject: [App_rpt-users] Connect announcements Has anyone gotten these settings to work ? irplann = 0 ; Default: 1 = Play irlp connect and disconnect announcements ; 0 = Disable irlp connect and disconnect announcements eannmode = 0 ; 0 = do not announce Echolink nodes at all, ; 1 = announce only the node number (Allstar-translated), ; 2 = announce only the call of the echolink station, ; 3 = announce both Paul M. Nannery Ham: KC2VRJ GMRS: WQBC441
I just tried the irlpann=0 and it does seem to disable the IRLP voice but not the node connected messages. Shouldn't it be disabling the asterisk messages and not the IRLP messages? Running SVN-733. 73 de Scott KB2EAR ----- Original Message ----- From: Jim Duuuude To: kc2vrj@gmail.com ; app_rpt mailing list Sent: Thursday, June 24, 2010 12:26 PM Subject: Re: [App_rpt-users] Connect announcements yeah, whats the problem? ------------------------------------------------------------------------------ From: kc2vrj@gmail.com To: app_rpt-users@qrvc.com Date: Thu, 24 Jun 2010 11:22:34 -0400 Subject: [App_rpt-users] Connect announcements Has anyone gotten these settings to work ? irplann = 0 ; Default: 1 = Play irlp connect and disconnect announcements ; 0 = Disable irlp connect and disconnect announcements eannmode = 0 ; 0 = do not announce Echolink nodes at all, ; 1 = announce only the node number (Allstar-translated), ; 2 = announce only the call of the echolink station, ; 3 = announce both Paul M. Nannery Ham: KC2VRJ GMRS: WQBC441 ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Nope, it only disables the IRLP announcements, the asterisk announce messages still happen. That's a seperate variable you have to set. Looking in my config, I have the following set on my chan_irlp node: telemdefault=0 telemdynamic=0 Jim, K6JWN On Jun 24, 2010, at 3:38 PM, Scott Weis wrote:
I just tried the irlpann=0 and it does seem to disable the IRLP voice but not the node connected messages. Shouldn't it be disabling the asterisk messages and not the IRLP messages? Running SVN-733.
73 de Scott KB2EAR ----- Original Message ----- From: Jim Duuuude To: kc2vrj@gmail.com ; app_rpt mailing list Sent: Thursday, June 24, 2010 12:26 PM Subject: Re: [App_rpt-users] Connect announcements
yeah, whats the problem?
From: kc2vrj@gmail.com To: app_rpt-users@qrvc.com Date: Thu, 24 Jun 2010 11:22:34 -0400 Subject: [App_rpt-users] Connect announcements
Has anyone gotten these settings to work ?
irplann = 0 ; Default: 1 = Play irlp connect and disconnect announcements ; 0 = Disable irlp connect and disconnect announcements
eannmode = 0 ; 0 = do not announce Echolink nodes at all, ; 1 = announce only the node number (Allstar-translated), ; 2 = announce only the call of the echolink station, ; 3 = announce both
Paul M. Nannery Ham: KC2VRJ GMRS: WQBC441
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
participants (4)
-
Jim Duuuude -
Jim Nessen -
Paul M. Nannery -
Scott Weis