G'day all, I am looking to minimise the node tail or hangtime after a transmission has ended. It currently seems to hang on for about a second or more after the transmission has ended while trying to maintain some telemetry on my node (mainly connection announcements). These are some of the settings I have modified in my rpt.conf file to try and achieve zero or minimal hangtime: duplex=1 hangtime=0 nounkeyct=1 I have also tried changing wait_times settings but don't seem to be able to reduce it any more than about a second in this mode. I think that I am able to achieve almost zero tail by setting the following: duplex=0 startup_macro=*933 I need to do some further testing, but this seems to work. I am wondering if there is a better way of doing this. 73, Leighton VK2LI