Mark, That's great. I'm glad the newer version of ezstream available to DIAL via ap-get work well. I have not touched Linux streaming since I stopped hosting a icecast server for a radio station on C Band subcarrier. I'll edit this into a test file and make sure it can be found for someone in the future. 73, Steve N4IRS On 10/08/2015 01:42 PM, Mark Johnston wrote:

Not sure if you saw my post about that a while back, using ACID it was just much easier to install now, had to use a really old version of ezstream before with the acid setup. Now it works from the normal install that is available.

apt-get install ezstream lame

I enabled this: load => app_chanspy.so ; Listen to the audio of an active channel not sure if that mattered though, seemed like it would be important...

add this below the first section of the rpt.conf for the node you want to broadcast.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml

;ezstream1001.xml

<ezstream>

<url>http://audio3.broadcastify.com:80/mountpoint-provided-by-broadcastify</url>

<sourcepassword>feed-specific-password-not-same-as-website-login</sourcepassword>

<format>MP3</format>

<filename>stdin</filename>

<stream_once>1</stream_once>

<reconnect_tries>0</reconnect_tries>

<svrinfoname>Description</svrinfoname>

<svrinfourl>http://www.radioreference.com/</svrinfourl>

<svrinfogenre>Amateur Radio</svrinfogenre>

<svrinfodescription>Description</svrinfodescription>

<svrinfobitrate>16</svrinfobitrate>

<svrinfochannels>1</svrinfochannels>

<svrinfosamplerate>22050</svrinfosamplerate>

<svrinfopublic>1</svrinfopublic>

</ezstream>

"Got Root?"

How many software engineers does it take to change a light bulb? *None. It's a hardware problem.*

Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas P oorly P laced L acks E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

/*_/"I get paid to support Windows, I use Linux to get work done."/_*/

On Thu, Oct 8, 2015 at 10:33 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:

Good to hear. It might be worth documenting what needs to be installed and any tweaks that need to be done.

73, Steve N4IRS

On 10/08/2015 01:30 PM, Mark Johnston wrote:

...

it's streaming, I even did a reboot and it's live now - not sure what the problem was, maybe something on their end...

http://www.broadcastify.com/listen/feed/21348/web

"Got Root?"

How many software engineers does it take to change a light bulb? *None. It's a hardware problem.*

Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas P oorly P laced L acks E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

/*_/"I get paid to support Windows, I use Linux to get work done."/_*/

On Thu, Oct 8, 2015 at 10:20 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:

Working as in streaming from the node or sending a audio file?

On 10/08/2015 01:19 PM, Mark Johnston wrote:

...

it gave me a login error

ezstream: Connection to http://audio3.broadcastify.com:80/wcms5pn74trz failed: Login failed

ezstream: Exiting ...

suddenly started working - not sure how/why though -

"Got Root?"

How many software engineers does it take to change a light bulb? *None. It's a hardware problem.*

Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas P oorly P laced L acks E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

/*_/"I get paid to support Windows, I use Linux to get work done."/_*/

On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:

can you send a audio file to broadcastify with the command line below?

On 10/08/2015 01:00 PM, Mark Johnston wrote:

...

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml

This just started appearing

[Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed!

"Got Root?"

How many software engineers does it take to change a light bulb? *None. It's a hardware problem.*

Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas P oorly P laced L acks E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

/*_/"I get paid to support Windows, I use Linux to get work done."/_*/

On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:

Mark, Your log is showing problems with sip and possibly a sound fob. I don't think you need app_ices

Please post you outstreamcmd in rpt.conf

you may want to disable the sip changes while troubleshooting streaming.

73, Steve N4IRS

On 10/08/2015 12:13 PM, Mark Johnston wrote:

...

Anyone try setting this up yet? Used to use this with ACID just fine Installed ezstream, and Lame -

shows it's running

1124 ? S 0:00 /bin/sh -c /usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml

I enabled this module, thinking thats what it needed

load => app_ices.so ; Encode and Stream via icecast and ices

;modules.conf

autoload=no

; Applications

noload => app_adsiprog.so ;Asterisk ADSI Programming Application

noload => app_alarmreceiver.so ;Alarm Receiver for Asterisk

noload => app_amd.so ;Answering Machine Detection Application

load => app_authenticate.so ; Authentication Application

noload => app_cdr.so ;Tell Asterisk to not maintain a CDR for

noload => app_chanisavail.so ;Check channel availability

noload => app_channelredirect.so ;Channel Redirect

load => app_chanspy.so ;Listen to the audio of an active channel

noload => app_controlplayback.so ;Control Playback Application

noload => app_dahdibarge.so ;Barge in on channel application

noload => app_dahdiras.so ;DAHDI RAS Application

noload => app_dahdiscan.so ;Scan Zap channels application

noload => app_db.so ;Database Access Functions

load => app_dial.so ;Dialing Application

noload => app_dictate.so ;Virtual Dictation Machine

noload => app_directed_pickup.so ;Directed Call Pickup Application

noload => app_directory.so ;Extension Directory

noload => app_disa.so ;DISA (Direct Inward System Access) Appli

noload => app_dumpchan.so ;Dump Info About The Calling Channel

noload => app_echo.so ;Simple Echo Application

load => app_exec.so ;Executes dialplan applications

noload => app_externalivr.so ;External IVR Interface Application

noload => app_festival.so ;Simple Festival Interface

noload => app_flash.so ;Flash channel application

noload => app_followme.so ;Find-Me/Follow-Me Application

noload => app_forkcdr.so ;Fork The CDR into 2 separate entities

noload => app_getcpeid.so ;Get ADSI CPE ID

noload => app_gps.so ;GPS interface module

noload => app_hasnewvoicemail.so ;Indicator for whether a voice mailbox ha

load => app_ices.so ;Encode and Stream via icecast and ices

noload => app_image.so ;Image Transmission Application

noload => app_lookupblacklist.so ;Look up Caller*ID name/number from black

noload => app_lookupcidname.so ;Look up CallerID Name from local databas

load => app_macro.so ;Extension Macros

noload => app_meetme.so ;MeetMe conference bridge

noload => app_milliwatt.so ;Digital Milliwatt (mu-law) Test Applicat

noload => app_mixmonitor.so ;Mixed Audio Monitoring Application

noload => app_morsecode.so ;Morse code

noload => app_mp3.so ;Silly MP3 Application

noload => app_nbscat.so ;Silly NBS Stream Application

noload => app_page.so ;Page Multiple Phones

noload => app_parkandannounce.so ;Call Parking and Announce Application

load => app_playback.so ;Sound File Playback Application

noload => app_privacy.so ;Require phone number to be entered, if n

noload => app_queue.so ;True Call Queueing

noload => app_radbridge.so ;Radio Bridging interface module

noload => app_random.so ;Random goto

noload => app_readfile.so ;Stores output of file into a variable

noload => app_read.so ;Read Variable Application

noload => app_realtime.so ;Realtime Data Lookup/Rewrite

noload => app_record.so ;Trivial Record Application

load => app_rpt.so ;Radio Repeater/Remote Base Application

noload => app_sayunixtime.so ;Say time

load => app_senddtmf.so ;Send DTMF digits Application

noload => app_sendtext.so ;Send Text Applications

noload => app_setcallerid.so ;Set CallerID Application

noload => app_setcdruserfield.so ;CDR user field apps

noload => app_settransfercapability.so ;Set ISDN Transfer Capability

noload => app_sms.so ;SMS/PSTN handler

noload => app_softhangup.so ;Hangs up the requested channel

noload => app_speech_utils.so ;Dialplan Speech Applications

noload => app_stack.so ;Stack Routines

load => app_system.so ;Generic System() application

noload => app_talkdetect.so ;Playback with Talk Detection

noload => app_test.so ;Interface Test Application

load => app_transfer.so ;Transfer

noload => app_url.so ;Send URL Applications

noload => app_userevent.so ;Custom User Event Application

noload => app_verbose.so ;Send verbose output

noload => app_voicemail.so ;Comedian Mail (Voicemail System)

noload => app_waitforring.so ;Waits until first ring after time

noload => app_waitforsilence.so ;Wait For Silence

noload => app_while.so ;While Loops and Conditional Execution

noload => app_zapateller.so ;Block Telemarketers with Special Informa

; CDR

noload => cdr_csv.so ;Comma Separated Values CDR Backend

noload => cdr_custom.so ;Customizable Comma Separated Values CDR

noload => cdr_manager.so ;Asterisk Manager Interface CDR Backend

; Channels

noload => chan_agent.so ;Agent Proxy Channel

noload => chan_alsa.so ;ALSA Console Channel Driver

noload => chan_beagle.so ;Beagleboard Radio Interface Channel Driver

load => chan_dahdi.so ;DAHDI Telephony

noload => chan_echolink.so ;echolink channel driver

noload => chan_features.so ;Feature Proxy Channel

noload => chan_gtalk.so ;Gtalk Channel Driver

load => chan_iax2.so ;Inter Asterisk eXchange (Ver 2)

load => chan_local.so ;Local Proxy Channel (Note: used internal

noload => chan_oss.so ;

noload => chan_phone.so ;

load => chan_simpleusb.so ;Simple USB Radio Interface Channel Drive

load => chan_sip.so ;Session Initiation Protocol (SIP)

noload => chan_tlb.so ;TheLinkBox channel driver

load => chan_usbradio.so ;USB Console Channel Driver

noload => chan_usrp.so ;USRP Channel Module

noload => chan_voter.so ;radio Voter channel driver

; Codecs

; CODEC AUDIO QUALITY BANDWIDTH (including IP and Ethernet headers)

; ULAW best 87 kilobits per second (kbps)

; ADPCM good 55 kbps

; GSM mediocre 36 kbps

; g726aal2

; ilbc

load => codec_adpcm.so ;Adaptive Differential PCM Coder/Decoder

load => codec_alaw.so ;A-law Coder/Decoder

load => codec_a_mu.so ;A-law and Mulaw direct Coder/Decoder

noload => codec_dahdi.so ;Generic DAHDI Transcoder Codec Translato

load => codec_g726.so ;ITU G.726-32kbps G726 Transcoder

load => codec_gsm.so ;GSM Coder/Decoder

load => codec_ulaw.so ;mu-Law Coder/Decoder

noload => codec_ilbc.so ;http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec

; Formats

load => format_g723.so ;G.723.1 Simple Timestamp File Format

load => format_g726.so ;Raw G.726 (16/24/32/40kbps) data

load => format_g729.so ;Raw G729 data

load => format_gsm.so ;Raw GSM data

load => format_h263.so ;Raw H.263 data

load => format_h264.so ;Raw H.264 data

load => format_ilbc.so ;Raw iLBC data

noload => format_jpeg.so ;JPEG (Joint Picture Experts Group) Image

load => format_pcm.so ;Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.

load => format_sln.so ;Raw Signed Linear Audio support (SLN)

load => format_vox.so ;Dialogic VOX (ADPCM) File Format

load => format_wav_gsm.so ;Microsoft WAV format (Proprietary GSM)

load => format_wav.so ;Microsoft WAV format (8000Hz Signed Line

; Functions

load => func_base64.so ;base64 encode/decode dialplan functions

load => func_callerid.so ;Caller ID related dialplan function

load => func_cdr.so ;CDR dialplan function

load => func_channel.so ;Channel information dialplan function

load => func_curl.so ;Load external URL

load => func_cut.so ;Cut out information from a string

load => func_db.so ;Database (astdb) related dialplan functi

load => func_enum.so ;ENUM related dialplan functions

load => func_env.so ;Environment/filesystem dialplan function

load => func_global.so ;Global variable dialplan functions

load => func_groupcount.so ;Channel group dialplan functions

load => func_language.so ;Channel language dialplan function

load => func_logic.so ;Logical dialplan functions

load => func_math.so ;Mathematical dialplan function

load => func_md5.so ;MD5 digest dialplan functions

load => func_moh.so ;Music-on-hold dialplan function

load => func_rand.so ;Random number dialplan function

load => func_realtime.so ;Read/Write values from a RealTime reposi

noload => func_sha1.so ;SHA-1 computation dialplan function

noload => func_strings.so ;String handling dialplan functions

noload => func_timeout.so ;Channel timeout dialplan functions

noload => func_uri.so ;URI encode/decode dialplan functions

; PBX

noload => pbx_ael.so ;Asterisk Extension Language Compiler

load => pbx_config.so ;Text Extension Configuration

noload => pbx_dundi.so ;Distributed Universal Number Discovery (

noload => pbx_loopback.so ;Loopback Switch

noload => pbx_realtime.so ;Realtime Switch

noload => pbx_spool.so ;Outgoing Spool Support

; Resources

load => res_adsi.so ;ADSI Resource

noload => res_agi.so ;Asterisk Gateway Interface (AGI)

noload => res_clioriginate.so ;Call origination from the CLI

noload => res_convert.so ;File format conversion CLI command

noload => res_crypto.so ;Cryptographic Digital Signatures

load => res_features.so ;Call Features Resource

load => res_indications.so ;Indications Resource

noload => res_jabber.so ;AJI - Asterisk Jabber Interface

noload => res_monitor.so ;Call Monitoring Resource

noload => res_musiconhold.so ;Music On Hold Resource

noload => res_smdi.so ;Simplified Message Desk Interface (SMDI)

noload => res_snmp.so ;SNMP [Sub]Agent for Asterisk

noload => res_speech.so ;Generic Speech Recognition API

[global]

/var/log/asterisk/messages;

[Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple logging enabled.

[Oct 8 08:44:24] NOTICE[1278] indications.c: Removed default indication country 'us'

[Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring switchtype

[Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring signalling

[Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring rxwink

[Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring bindport on reload

[Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring bindaddr on reload

[Oct 8 08:44:25] WARNING[1278] acl.c: is not a valid IP

[Oct 8 08:44:25] WARNING[714] chan_sip.c: insecure=very at line 31 is deprecated; use insecure=port,invite instead

[Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple logging enabled.

[Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules will be loaded.

[Oct 8 08:47:46] WARNING[683] acl.c: is not a valid IP

[Oct 8 08:47:46] WARNING[683] acl.c: Unable to lookup 'callcentric.com <http://callcentric.com>'

[Oct 8 08:47:46] WARNING[714] chan_sip.c: No such host: callcentric.com <http://callcentric.com>

[Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably a DNS error for registration to 17772150287101@callcentric.com <mailto:17772150287101@callcentric.com>, trying REGISTER again (after 20 seconds)

[Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater Init 29626

[Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater Init 29627

[Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater Init 1001

[Oct 8 08:47:47] WARNING[722] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1001.conf for device usb1001 .

[Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Possibly stuck USB read channel. [usb1001]

[Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Nope, USB read channel [usb1001] wasn't stuck after all.

[Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c: Assigned USB device 5-2:1.0 to simpleusb channel usb29626

[Oct 8 08:47:47] WARNING[719] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb29626.conf for device usb29626 .

[Oct 8 08:47:47] NOTICE[721] chan_usbradio.c: Assigned USB device 5-2:1.0 to usbradio channel usb29627

[Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Loaded parameters from usbradio_tune_usb29627.conf for device usb29627 .

[Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Unable to re-open DSP device 2 (usb29627): Device or resource busy

[Oct 8 08:48:06] NOTICE[714] chan_sip.c: -- Registration for '17772150287101@callcentric.com <mailto:17772150287101@callcentric.com>' timed out, trying again (Attempt #1)

[Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple logging enabled.

[Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules will be loaded.

[Oct 8 08:59:15] WARNING[673] acl.c: is not a valid IP

[Oct 8 08:59:15] WARNING[673] acl.c: Unable to lookup 'callcentric.com <http://callcentric.com>'

[Oct 8 08:59:15] WARNING[711] chan_sip.c: No such host: callcentric.com <http://callcentric.com>

[Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably a DNS error for registration to 17772150287101@callcentric.com <mailto:17772150287101@callcentric.com>, trying REGISTER again (after 20 seconds)

[Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater Init 29626

[Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater Init 29627

[Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater Init 1001

[Oct 8 08:59:15] WARNING[718] chan_usbradio.c: Loaded parameters from usbradio_tune_usb29627.conf for device usb29627 .

[Oct 8 08:59:15] WARNING[715] chan_usbradio.c: Possibly stuck USB read channel. [usb29627]

[Oct 8 08:59:16] WARNING[715] chan_usbradio.c: Nope, USB read channel [usb29627] wasn't stuck after all.

[Oct 8 08:59:16] NOTICE[719] chan_usbradio.c: Assigned USB device 5-2:1.0 to usbradio channel usb1001

[Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c: Assigned USB device 5-2:1.0 to simpleusb channel usb29626

[Oct 8 08:59:16] WARNING[716] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb29626.conf for device usb29626 .

[Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1001.conf for device usb1001 .

[Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Unable to re-open DSP device 2 (usb1001): Device or resource busy

[Oct 8 08:59:35] NOTICE[711] chan_sip.c: -- Registration for '17772150287101@callcentric.com <mailto:17772150287101@callcentric.com>' timed out, trying again (Attempt #1)

- Is there something else to enable or a better app to use, for feeding to broadcastify?

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic