Hi! I am using the dsp fonction of the app_rpt as core and tone. And I am using the tone output by the URI to encode my ctcss tone. All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater. On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp. Is there a way to do the same with app_rpt? Pierre VE2PF
On May 3, 2013, at 7:35 PM, Pierre Martel <petem001@hotmail.com> wrote:
All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater.
On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp.
Is there a way to do the same with app_rpt?
Yes! Take a look at cop commands 58 and 59.
* 58 - Tx CTCSS On Input only Enable * 59 - Tx CTCSS On Input only Disable I have those commands defined so I can turn on and off using DTMF. Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860
Thanks matt, This would work, but is there a way to make it permanent? like in rpt.conf or such? -----Message d'origine----- From: Matt Roberts Sent: Friday, May 03, 2013 7:56 PM To: Pierre Martel Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone On May 3, 2013, at 7:35 PM, Pierre Martel <petem001@hotmail.com> wrote:
All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater.
On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp.
Is there a way to do the same with app_rpt?
Yes! Take a look at cop commands 58 and 59.
* 58 - Tx CTCSS On Input only Enable * 59 - Tx CTCSS On Input only Disable I have those commands defined so I can turn on and off using DTMF. Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860
What about a startup macro? Keith On 5/3/13 8:26 PM, "Pierre Martel" <petem001@hotmail.com> wrote:
Thanks matt,
This would work, but is there a way to make it permanent?
like in rpt.conf or such?
-----Message d'origine----- From: Matt Roberts Sent: Friday, May 03, 2013 7:56 PM To: Pierre Martel Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone
On May 3, 2013, at 7:35 PM, Pierre Martel <petem001@hotmail.com> wrote:
All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater.
On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp.
Is there a way to do the same with app_rpt?
Yes! Take a look at cop commands 58 and 59.
* 58 - Tx CTCSS On Input only Enable * 59 - Tx CTCSS On Input only Disable
I have those commands defined so I can turn on and off using DTMF.
Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
A start up macro is another good idea. Just one question.. Does the startup macro run even when we do a reload from the asterisk CLI? Envoyé de mon iPad Le 3 May 2013 à 20:28, "Keith Goobie" <keith@goobie.org> a écrit :
What about a startup macro?
Keith
On 5/3/13 8:26 PM, "Pierre Martel" <petem001@hotmail.com> wrote:
Thanks matt,
This would work, but is there a way to make it permanent?
like in rpt.conf or such?
-----Message d'origine----- From: Matt Roberts Sent: Friday, May 03, 2013 7:56 PM To: Pierre Martel Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone
On May 3, 2013, at 7:35 PM, Pierre Martel <petem001@hotmail.com> wrote:
All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater.
On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp.
Is there a way to do the same with app_rpt?
Yes! Take a look at cop commands 58 and 59.
* 58 - Tx CTCSS On Input only Enable * 59 - Tx CTCSS On Input only Disable
I have those commands defined so I can turn on and off using DTMF.
Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
A good question, someone one else will have to respond, but after reloading the config file, you could force it by the command. rpt fun your_node_number *58 Keith On 5/3/13 8:58 PM, "pete M" <petem001@hotmail.com> wrote:
A start up macro is another good idea.
Just one question.. Does the startup macro run even when we do a reload from the asterisk CLI?
Envoyé de mon iPad
Le 3 May 2013 à 20:28, "Keith Goobie" <keith@goobie.org> a écrit :
What about a startup macro?
Keith
On 5/3/13 8:26 PM, "Pierre Martel" <petem001@hotmail.com> wrote:
Thanks matt,
This would work, but is there a way to make it permanent?
like in rpt.conf or such?
-----Message d'origine----- From: Matt Roberts Sent: Friday, May 03, 2013 7:56 PM To: Pierre Martel Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone
On May 3, 2013, at 7:35 PM, Pierre Martel <petem001@hotmail.com> wrote:
All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater.
On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp.
Is there a way to do the same with app_rpt?
Yes! Take a look at cop commands 58 and 59.
* 58 - Tx CTCSS On Input only Enable * 59 - Tx CTCSS On Input only Disable
I have those commands defined so I can turn on and off using DTMF.
Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
Yes there is put: itxctcss=1 in the node stanza. -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Pierre Martel Sent: Friday, May 03, 2013 8:26 PM To: Matt Roberts Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone Thanks matt, This would work, but is there a way to make it permanent? like in rpt.conf or such? -----Message d'origine----- From: Matt Roberts Sent: Friday, May 03, 2013 7:56 PM To: Pierre Martel Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone On May 3, 2013, at 7:35 PM, Pierre Martel <petem001@hotmail.com> wrote:
All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater.
On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp.
Is there a way to do the same with app_rpt?
Yes! Take a look at cop commands 58 and 59.
* 58 - Tx CTCSS On Input only Enable * 59 - Tx CTCSS On Input only Disable I have those commands defined so I can turn on and off using DTMF. Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Bingo! Thanks Scott! Envoyé de mon iPad Le 3 May 2013 à 21:01, "Scott Weis" <kb2ear@kb2ear.net> a écrit :
Yes there is put:
itxctcss=1
in the node stanza.
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Pierre Martel Sent: Friday, May 03, 2013 8:26 PM To: Matt Roberts Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone
Thanks matt,
This would work, but is there a way to make it permanent?
like in rpt.conf or such?
-----Message d'origine----- From: Matt Roberts Sent: Friday, May 03, 2013 7:56 PM To: Pierre Martel Cc: APP RPT Subject: Re: [App_rpt-users] control of the tx tone
On May 3, 2013, at 7:35 PM, Pierre Martel <petem001@hotmail.com> wrote:
All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater.
On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp.
Is there a way to do the same with app_rpt?
Yes! Take a look at cop commands 58 and 59.
* 58 - Tx CTCSS On Input only Enable * 59 - Tx CTCSS On Input only Disable
I have those commands defined so I can turn on and off using DTMF.
Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
You can set up the dtmf commands in rpt .conf like this: 882=cop,58 ; talk through tone 883=cop,59 ; normal ctcss Then define a macro that calls *882 as above. [macros] 300 = *882 ; go to tone talk through mode Set up a startup macro in the node stanza to execute the talk through ctcss when Asterisk restarts. startup_macro=*5300 ; enable talk through tone This assumes your macro prefix is defined as 5. And yes it does work every time Asterisk is started. Jon VA3RQ On 5/3/2013 9:06 PM, pete M wrote: > Bingo! Thanks Scott! > > > Envoyé de mon iPad > > Le 3 May 2013 à 21:01, "Scott Weis"<kb2ear@kb2ear.net> a écrit : > >> Yes there is put: >> >> itxctcss=1 >> >> in the node stanza. >> >> -----Original Message----- >> From: app_rpt-users-bounces@ohnosec.org >> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Pierre Martel >> Sent: Friday, May 03, 2013 8:26 PM >> To: Matt Roberts >> Cc: APP RPT >> Subject: Re: [App_rpt-users] control of the tx tone >> >> Thanks matt, >> >> This would work, but is there a way to make it permanent? >> >> like in rpt.conf or such? >> >> >> -----Message d'origine----- >> From: Matt Roberts >> Sent: Friday, May 03, 2013 7:56 PM >> To: Pierre Martel >> Cc: APP RPT >> Subject: Re: [App_rpt-users] control of the tx tone >> >> >> On May 3, 2013, at 7:35 PM, Pierre Martel<petem001@hotmail.com> wrote: >> >>> All is working ok, but I have a few friend that use my repeater with some >>> cross band repeater radio. And they have difficulty cutting in cause they >>> have to wait after the tail and ct. before there cross band repeat radio >>> give them the chance to tx back at the repeater. >>> >>> On my old rc-210 we were able to stop encoding the ctcss tone while the >>> courtesy tone and tail of the repeater..So they were runnign ther xband >>> radio on tone squelch on rx and the tx on there side was fast and sharp. >>> >>> Is there a way to do the same with app_rpt? >>> Yes! Take a look at cop commands 58 and 59. >> * 58 - Tx CTCSS On Input only Enable >> * 59 - Tx CTCSS On Input only Disable >> >> I have those commands defined so I can turn on and off using DTMF. >> >> >> Matt Roberts >> n9gmr@me.com >> Call Sign N9GMR >> Allstar 28142 >> EchoLink 640860 >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users@ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (6)
-
Keith Goobie -
Matt Roberts -
pete M -
Pierre Martel
-
REDBUTTON_CTRL -
Scott Weis