Greetings, I have been working on the node the past couple of days. Here is my problems. 1. The incoming echolink audio is fine the repeater audio is fine. But the incoming asterisk connects are low. Can I adjust that? 2. When an iaxrpt user connects. I can not get the caller id out for that person. I have ,made everyone there own sign in. It is easier on me. Is there a way I can fix this? 3. I have voicemail working ont he repeater. You can access it from RF. But I can not get it to the point where they can check there mail. I can not get login to voiccemailmain to work right. Can I get help on this also? 73 Ryan KB8PMY
Use this procedure https://allstarlink.org/usbradio.html That will make repeater, link and announcement audio perfect. Then tweak the Echolink settings last. -- Tim :wq On Mar 15, 2013, at 8:31 PM, Ryan Collier <kb8pmy@kb8pmy.net> wrote:
1. The incoming echolink audio is fine the repeater audio is fine. But the incoming asterisk connects are low. Can I adjust that?
Ryan 1. Another users suggested that you make sure that the Asterisk audio be set-up first. This is very good counsel. Follow the procedures as dictated in the allstarlink.org web site. Once that is complete, you can adjust the Echolink audio as a parameter in the usbradio config file. Look for erxgain and etxgain in rpt.conf. 2. When the user sets up the iaxrpt client, the second tab in the preferences allows the user to set his callsign. Whne that is done, he will be announced on the node. If the user does not set this he connects in a stealthy manner. Otherwise if a value is set, then they are announced during connects and disconnects. If everyone follows this, then you can move forward with a common userid and password. 3. Where is your voicemail with respect to asterisk & the bare repeater. You need to supply a little more detail, before people can respond. I think that you are looking to pass dtmf from a remote user to your repeater so that they can get voicemail but I am guessing that this is what you are seeking. Cheers Keith / VA3YC On 3/15/13 11:31 PM, "Ryan Collier" <kb8pmy@kb8pmy.net> wrote:
Greetings,
I have been working on the node the past couple of days.
Here is my problems.
1. The incoming echolink audio is fine the repeater audio is fine. But the incoming asterisk connects are low. Can I adjust that?
2. When an iaxrpt user connects. I can not get the caller id out for that person. I have ,made everyone there own sign in. It is easier on me. Is there a way I can fix this?
3. I have voicemail working ont he repeater. You can access it from RF. But I can not get it to the point where they can check there mail. I can not get login to voiccemailmain to work right. Can I get help on this also?
73 Ryan KB8PMY
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
Re: [App_rpt-users] Couple of issues...To triple the comment, you sound like your general audio settings are bad. Echolink audio is nothing short of horrible, don't set up to that. If you set the repeater modulation as per the asterisk app_rpt setup procedure the audio will be fantastic. Except for echolink. In rpt.conf there are settings to increase/decrease audio levels to and from echolink. But good luck setting those, as far as I have seen there is no "standard" for Echolink. There is very definetly for the Asterisk/Allstar side. But another part of your comment makes me curious, is the computer running Asterisk the controller for the repeater? That's best but it sounds like you may have said computer connected to a repeater controller. All bets are off there. I say this because you suggest that the repeater audio is ok, but asterisk conncts are low. This suggests a repeater audio path that is different for loacl repeat audio and asterisk/allstar. GeorgeC W2DB 2360 ----- Original Message ----- From: Keith Goobie To: Ryan Collier ; app_rpt-users@ohnosec.org Sent: Saturday, March 16, 2013 8:57 AM Subject: Re: [App_rpt-users] Couple of issues... Ryan 1. Another users suggested that you make sure that the Asterisk audio be set-up first. This is very good counsel. Follow the procedures as dictated in the allstarlink.org web site. Once that is complete, you can adjust the Echolink audio as a parameter in the usbradio config file. Look for erxgain and etxgain in rpt.conf. 2. When the user sets up the iaxrpt client, the second tab in the preferences allows the user to set his callsign. Whne that is done, he will be announced on the node. If the user does not set this he connects in a stealthy manner. Otherwise if a value is set, then they are announced during connects and disconnects. If everyone follows this, then you can move forward with a common userid and password. 3. Where is your voicemail with respect to asterisk & the bare repeater. You need to supply a little more detail, before people can respond. I think that you are looking to pass dtmf from a remote user to your repeater so that they can get voicemail - but I am guessing that this is what you are seeking. Cheers Keith / VA3YC On 3/15/13 11:31 PM, "Ryan Collier" <kb8pmy@kb8pmy.net> wrote: Greetings, I have been working on the node the past couple of days. Here is my problems. 1. The incoming echolink audio is fine the repeater audio is fine. But the incoming asterisk connects are low. Can I adjust that? 2. When an iaxrpt user connects. I can not get the caller id out for that person. I have ,made everyone there own sign in. It is easier on me. Is there a way I can fix this? 3. I have voicemail working ont he repeater. You can access it from RF. But I can not get it to the point where they can check there mail. I can not get login to voiccemailmain to work right. Can I get help on this also? 73 Ryan KB8PMY ---------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
participants (4)
-
George Csahanin -
Keith Goobie -
Ryan Collier -
Tim Sawyer