I don't see alot of support for the XIPAR distro. I installed the latest but as of yet can't connect to it from outside my local LAN. My ACID install works that tells me port forwarding on the router is operational. I am using the same IP and port on each box and yes, only 1 box at a time is hooked to the LAN. I want to play with the "simple voting" if anyone has hints, tips or grief on their own experience's I would love to hear about it. There does not seem to be a lot of help on the XELETEC site, and I can understand why. Just moving forward... Ron Simpson, N6GKJ CET Sr., FCC
On 3/15/2013 9:10 PM, Ron Simpson wrote:
I don't see alot of support for the XIPAR distro. I installed the latest but as of yet can't connect to it from outside my local LAN. My ACID install works that tells me port forwarding on the router is operational. I am using the same IP and port on each box and yes, only 1 box at a time is hooked to the LAN.
I want to play with the "simple voting" if anyone has hints, tips or grief on their own experience's I would love to hear about it.
There does not seem to be a lot of help on the XELETEC site, and I can understand why.
Just moving forward...
Ron Simpson, N6GKJ CET Sr., FCC
Try here: http://www.allstarnode.com/ Kevin
I ran some tests using the XIPAR voting. Works just fine. I'd say equivalent performance to a Doug Hall voter. Not very hard at all to set up. Just follow what it says here: http://www.xelatec.com/xipar/simplevoter or here: http://www.allstarnode.com/viewtopic.php?f=5&t=33 WB3AWJ Allstar 27784, etc. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity.
I run it on my UHF machine and am quite happy with it. Randy, KB3HJC, also runs it on his Carlisle, PA repeater with 2 voting receivers. Once I get data to my VHF repeater site that will also have voting receivers attached to it. It works quite well! Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Robert a. Poff [wb3awj@comcast.net] Sent: Friday, March 15, 2013 10:55 PM To: Ron Simpson; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Looking for the XIPAR experts I ran some tests using the XIPAR voting. Works just fine. I'd say equivalent performance to a Doug Hall voter. Not very hard at all to set up. Just follow what it says here: http://www.xelatec.com/xipar/simplevoter or here: http://www.allstarnode.com/viewtopic.php?f=5&t=33 WB3AWJ Allstar 27784, etc. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=5C3B71FA3.AE1D2>
participants (4)
-
Corey Dean -
Kevin Custer -
Robert a. Poff -
Ron Simpson