When allmon is active, it is constantly updating to the remote node. You will see a bundle of traffic. Keith On 9/24/13 6:09 PM, "Ian" <jedscoot@yahoo.com> wrote:

Hello,

I have Allmon running with Lighttpd on my PI and I have noticed while connected to a remote node via [ ssh ] to monitor, I see continual [ remote manager connect; remote manager disconnect ] prompts after a connect to the remote node from Allmon when logged in as admin. There is no indication that the connection is connecting/disconnecting so I'm guessing that I just haven't quite set things up properly. Any comments/suggestions most welcome.

73, Ian..

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA

May not be of any help but, did you uncomment the displayconnects = yes in the /etc/asterisk/manager.conf and change it to no?   JK From: Ian <jedscoot@yahoo.com> To: "App_rpt-users@ohnosec.org" <App_rpt-users@ohnosec.org> Sent: Tuesday, September 24, 2013 6:09 PM Subject: [App_rpt-users] Allmon+Lighttpd Hello, I have Allmon running with Lighttpd on my PI and I have noticed while connected to a remote node via [ ssh ] to monitor, I see continual [ remote manager connect; remote manager disconnect ] prompts after a connect to the remote node from Allmon when logged in as admin.  There is no indication that the connection is connecting/disconnecting so I'm guessing that I just haven't quite set things up properly. Any comments/suggestions most welcome. 73, Ian.. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users