So I was able to get manual download and now my login screen shows N1XBM/R. I also now show up on allstar link. I tried connecting to my node (radio not connected yet) with the web transceiver I hit connect and nothing. I tried hitting the number keys and nothing. I also tried an automatic download of my server config and that did not appear to work. It said my server should reboot when done and I did not get a reboot. So I guess I am making some progress here. I need to figure out the web transceiver and why I can not download my server config from the website. -- Apparare Scientior Paratus Communicare -N1XBM
Make sure you can connect to some other node than your own to test the webtransceiver. It's kinda buggy and may not be working for you. If that's ok what you may have is poor nat-tranversal... meaning the webtransceiver has to connect to your public IP and thus traverse out of your router and then back into your router and to the node. Some routers don't do that well. Also make sure you have 4567, or whichever IAX port you are using forwarded to your node. Have someone connect to your node, just ask anyone here will be glad to try it. Remember, a node has to be on line for a long while before it learns all the IP address of the other nodes and before the other nodes learn about your IP. Sometimes that can take up to a half an hour. -- Tim :wq On Sep 24, 2013, at 7:15 PM, Robert N. Newberry <N1XBM@amsat.org> wrote:
So I was able to get manual download and now my login screen shows N1XBM/R. I also now show up on allstar link. I tried connecting to my node (radio not connected yet) with the web transceiver I hit connect and nothing. I tried hitting the number keys and nothing. I also tried an automatic download of my server config and that did not appear to work. It said my server should reboot when done and I did not get a reboot.
So I guess I am making some progress here. I need to figure out the web transceiver and why I can not download my server config from the website.
-- Apparare Scientior Paratus Communicare -N1XBM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I have a 2 node setup on repeater, one for vhf and one for vhf. I run Acid and want to run the setup on a 64 bit machine. I have seen that Xipar will run on 64 bit arch. If I transfert my node to a xipar machine will have to retune my levels with radio tune menu or will I be able to transfert the info in the usbradio_tune_usbxxxxx.conf with xipar?
May not be of any help but, did you uncomment the displayconnects = yes in the /etc/asterisk/manager.conf and change it to no? JK From: Pierre Martel <petem001@hotmail.com> To: app_rpt-users@ohnosec.org Sent: Tuesday, September 24, 2013 11:04 PM Subject: [App_rpt-users] radio tune settings I have a 2 node setup on repeater, one for vhf and one for vhf. I run Acid and want to run the setup on a 64 bit machine. I have seen that Xipar will run on 64 bit arch. If I transfert my node to a xipar machine will have to retune my levels with radio tune menu or will I be able to transfert the info in the usbradio_tune_usbxxxxx.conf with xipar? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Yes!! but the radio tune settings are set in the CLI also get the docs on the wan page for the filter settings, you'll love it. Don't give up on acid, it has advantages like allmon. From: Pierre Martel <petem001@hotmail.com> To: app_rpt-users@ohnosec.org Sent: Tuesday, September 24, 2013 11:04 PM Subject: [App_rpt-users] radio tune settings I have a 2 node setup on repeater, one for vhf and one for vhf. I run Acid and want to run the setup on a 64 bit machine. I have seen that Xipar will run on 64 bit arch. If I transfert my node to a xipar machine will have to retune my levels with radio tune menu or will I be able to transfert the info in the usbradio_tune_usbxxxxx.conf with xipar? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Chances are you will want to retune if you will be using the wider codecs. Corey N3FE -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Pierre Martel Sent: Tuesday, September 24, 2013 11:05 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] radio tune settings I have a 2 node setup on repeater, one for vhf and one for vhf. I run Acid and want to run the setup on a 64 bit machine. I have seen that Xipar will run on 64 bit arch. If I transfert my node to a xipar machine will have to retune my levels with radio tune menu or will I be able to transfert the info in the usbradio_tune_usbxxxxx.conf with xipar? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=3F8702228.A74B8
The nodesetup.sh script may help???? try it from your root prompt [root@N1XBM ~]#nodesetup.sh follow the prompts From: Robert N. Newberry <N1XBM@amsat.org> To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Sent: Tuesday, September 24, 2013 10:15 PM Subject: [App_rpt-users] some more progress So I was able to get manual download and now my login screen shows N1XBM/R. I also now show up on allstar link. I tried connecting to my node (radio not connected yet) with the web transceiver I hit connect and nothing. I tried hitting the number keys and nothing. I also tried an automatic download of my server config and that did not appear to work. It said my server should reboot when done and I did not get a reboot. So I guess I am making some progress here. I need to figure out the web transceiver and why I can not download my server config from the website. -- Apparare Scientior Paratus Communicare -N1XBM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Corey Dean -
Johnny Keeker -
Pierre Martel -
Robert N. Newberry -
Tim Sawyer