"Official" "fixed" DAHDI patches
After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform). If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work". This patch set may be obtained from: https://allstarlink.org/fixed-dahdi-patches.tar.gz or from SVN at: http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed...
Jim, I would like to publicly THANK YOU for all your years of hard work and dedication on the Allstar project. For me, it has been one of the most exciting and interesting aspects of ham radio to date. If there is anyway I can help, please do not hesitate to ask. Respectfully, Michael Hebert - KD5DFB On Tue, Mar 25, 2014 at 1:32 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform).
If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work".
This patch set may be obtained from:
https://allstarlink.org/fixed-dahdi-patches.tar.gz
or from SVN at:
http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks.... Will test it out. ________________________________ From: Jim Duuuude <telesistant@hotmail.com> To: app_rpt mailing list <app_rpt-users@ohnosec.org>; "mike@glaserelectronics.com" <mike@glaserelectronics.com> Sent: Tuesday, March 25, 2014 2:32:09 PM Subject: [App_rpt-users] "Official" "fixed" DAHDI patches After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform). If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work". This patch set may be obtained from: https://allstarlink.org/fixed-dahdi-patches.tar.gz or from SVN at: http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed... _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersand scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Jim, New 3/25 patches work fine here. Autopatch works. Anything else we should be checking? Thanks for all your work on this. Much appreciated. Debian GNU/Linux 7.4 (wheezy) Kernel 3.2.0-4-686-pae dahdi-linux-complete-2.9.0+2.9.0.1 73 Doug WA3DSP http://www.crompton.com/hamradio From: telesistant@hotmail.com To: app_rpt-users@ohnosec.org; mike@glaserelectronics.com Date: Tue, 25 Mar 2014 11:32:09 -0700 Subject: [App_rpt-users] "Official" "fixed" DAHDI patches After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform). If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work". This patch set may be obtained from: https://allstarlink.org/fixed-dahdi-patches.tar.gz or from SVN at: http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed... _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Doug, Have you looked at this? I am running this with out any problems. Not sure if we can add all the stuff needed for app_rpt http://nerdvittles.com/?p=8178 Michael Hebert - KD5DFB On Tue, Mar 25, 2014 at 4:43 PM, Doug Crompton <doug@crompton.com> wrote:
Jim,
New 3/25 patches work fine here. Autopatch works. Anything else we should be checking?
Thanks for all your work on this. Much appreciated.
Debian GNU/Linux 7.4 (wheezy) Kernel 3.2.0-4-686-pae dahdi-linux-complete-2.9.0+2.9.0.1
*73 DougWA3DSPhttp://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
------------------------------ From: telesistant@hotmail.com To: app_rpt-users@ohnosec.org; mike@glaserelectronics.com Date: Tue, 25 Mar 2014 11:32:09 -0700 Subject: [App_rpt-users] "Official" "fixed" DAHDI patches
After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform).
If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work".
This patch set may be obtained from:
https://allstarlink.org/fixed-dahdi-patches.tar.gz
or from SVN at:
http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
That’s a spiffy new Asterisk with FreePBX and other bits added. I’m not sure how well the app_rpt.c chan_echolink.c chan_voter.c and friends will compile under asterisk 18 and later, though suspect the answer is “not bloody likely”. I’d be pleased to be wrong about this, however. For my purposes and preferences, FreePBX is unnecessary complexity that I just don’t want. I kinda wish I could have some of the audio tweaks and what not that are in Xipar though still with Echolink support, audio recording and audio streaming support. Yeah, I want it all. There’s just no pleasing some people. Well, except me. I’m actually quite content with the Acid bits, although I’ll be much happier once I move back over to a Debian install. Mostly because I just like Debian better. On Mar 25, 2014, at 6:51 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Doug,
Have you looked at this? I am running this with out any problems. Not sure if we can add all the stuff needed for app_rpt
http://nerdvittles.com/?p=8178
Michael Hebert - KD5DFB
On Tue, Mar 25, 2014 at 4:43 PM, Doug Crompton <doug@crompton.com> wrote: Jim,
New 3/25 patches work fine here. Autopatch works. Anything else we should be checking?
Thanks for all your work on this. Much appreciated.
Debian GNU/Linux 7.4 (wheezy) Kernel 3.2.0-4-686-pae dahdi-linux-complete-2.9.0+2.9.0.1
73 Doug WA3DSP http://www.crompton.com/hamradio
From: telesistant@hotmail.com To: app_rpt-users@ohnosec.org; mike@glaserelectronics.com Date: Tue, 25 Mar 2014 11:32:09 -0700 Subject: [App_rpt-users] "Official" "fixed" DAHDI patches
After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform).
If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work".
This patch set may be obtained from:
https://allstarlink.org/fixed-dahdi-patches.tar.gz
or from SVN at:
http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yes, I am well aware of the PIAF at nerdvittles but they have not done anything special. Asterisk runs fine on the RPi in many applications like incredible PBX. The problem is the USB stack and its inability to work well with the sample rates and DAC's used by app_rpt. I have it working, just not working well enough for production. The issues I experienced had nothig to do with dahdi it was the inability to support USB 2.0 and the screwy HW on the Pi with the ethernet running on USB etc. This is an old link but it addresses some of the problems of the Pi. It is ashame they are standing on their heads trying to fix this in SW when a new say version 'C' Pi with updated HW would be the best solution. I suspect if they don't come out with a new version the Pi will be outdated soon. The Beagle Black is already a better choice in many situations and there are others out there and many more to come. I have no doubt Allstar will run well on a ARM processor in the future just maybe not the RPi. http://www.raspberrypi.org/phpBB3/viewtopic.php?t=12097 73 Doug WA3DSP http://www.crompton.com/hamradio
Subject: Re: [App_rpt-users] "Official" "fixed" DAHDI patches From: buddy@brannan.name Date: Tue, 25 Mar 2014 19:38:45 -0400 CC: doug@crompton.com; app_rpt-users@ohnosec.org To: mhebert1975@gmail.com
That’s a spiffy new Asterisk with FreePBX and other bits added. I’m not sure how well the app_rpt.c chan_echolink.c chan_voter.c and friends will compile under asterisk 18 and later, though suspect the answer is “not bloody likely”. I’d be pleased to be wrong about this, however.
For my purposes and preferences, FreePBX is unnecessary complexity that I just don’t want. I kinda wish I could have some of the audio tweaks and what not that are in Xipar though still with Echolink support, audio recording and audio streaming support. Yeah, I want it all. There’s just no pleasing some people. Well, except me. I’m actually quite content with the Acid bits, although I’ll be much happier once I move back over to a Debian install. Mostly because I just like Debian better.
On Mar 25, 2014, at 6:51 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Doug,
Have you looked at this? I am running this with out any problems. Not sure if we can add all the stuff needed for app_rpt
http://nerdvittles.com/?p=8178
Michael Hebert - KD5DFB
On Tue, Mar 25, 2014 at 4:43 PM, Doug Crompton <doug@crompton.com> wrote: Jim,
New 3/25 patches work fine here. Autopatch works. Anything else we should be checking?
Thanks for all your work on this. Much appreciated.
Debian GNU/Linux 7.4 (wheezy) Kernel 3.2.0-4-686-pae dahdi-linux-complete-2.9.0+2.9.0.1
73 Doug WA3DSP http://www.crompton.com/hamradio
From: telesistant@hotmail.com To: app_rpt-users@ohnosec.org; mike@glaserelectronics.com Date: Tue, 25 Mar 2014 11:32:09 -0700 Subject: [App_rpt-users] "Official" "fixed" DAHDI patches
After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform).
If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work".
This patch set may be obtained from:
https://allstarlink.org/fixed-dahdi-patches.tar.gz
or from SVN at:
http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I thought it might be worth a shot. On Mar 25, 2014 7:40 PM, "Doug Crompton" <doug@crompton.com> wrote:
Yes, I am well aware of the PIAF at nerdvittles but they have not done anything special. Asterisk runs fine on the RPi in many applications like incredible PBX. The problem is the USB stack and its inability to work well with the sample rates and DAC's used by app_rpt. I have it working, just not working well enough for production. The issues I experienced had nothig to do with dahdi it was the inability to support USB 2.0 and the screwy HW on the Pi with the ethernet running on USB etc.
This is an old link but it addresses some of the problems of the Pi. It is ashame they are standing on their heads trying to fix this in SW when a new say version 'C' Pi with updated HW would be the best solution. I suspect if they don't come out with a new version the Pi will be outdated soon. The Beagle Black is already a better choice in many situations and there are others out there and many more to come. I have no doubt Allstar will run well on a ARM processor in the future just maybe not the RPi.
http://www.raspberrypi.org/phpBB3/viewtopic.php?t=12097
*73 DougWA3DSPhttp://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
Subject: Re: [App_rpt-users] "Official" "fixed" DAHDI patches From: buddy@brannan.name Date: Tue, 25 Mar 2014 19:38:45 -0400 CC: doug@crompton.com; app_rpt-users@ohnosec.org To: mhebert1975@gmail.com
That's a spiffy new Asterisk with FreePBX and other bits added. I'm not sure how well the app_rpt.c chan_echolink.c chan_voter.c and friends will compile under asterisk 18 and later, though suspect the answer is "not bloody likely". I'd be pleased to be wrong about this, however.
For my purposes and preferences, FreePBX is unnecessary complexity that I just don't want. I kinda wish I could have some of the audio tweaks and what not that are in Xipar though still with Echolink support, audio recording and audio streaming support. Yeah, I want it all. There's just no pleasing some people. Well, except me. I'm actually quite content with the Acid bits, although I'll be much happier once I move back over to a Debian install. Mostly because I just like Debian better.
On Mar 25, 2014, at 6:51 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Doug,
Have you looked at this? I am running this with out any problems. Not sure if we can add all the stuff needed for app_rpt
http://nerdvittles.com/?p=8178
Michael Hebert - KD5DFB
On Tue, Mar 25, 2014 at 4:43 PM, Doug Crompton <doug@crompton.com> wrote: Jim,
New 3/25 patches work fine here. Autopatch works. Anything else we should be checking?
Thanks for all your work on this. Much appreciated.
Debian GNU/Linux 7.4 (wheezy) Kernel 3.2.0-4-686-pae dahdi-linux-complete-2.9.0+2.9.0.1
73 Doug WA3DSP http://www.crompton.com/hamradio
From: telesistant@hotmail.com To: app_rpt-users@ohnosec.org; mike@glaserelectronics.com Date: Tue, 25 Mar 2014 11:32:09 -0700 Subject: [App_rpt-users] "Official" "fixed" DAHDI patches
After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform).
If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work".
This patch set may be obtained from:
https://allstarlink.org/fixed-dahdi-patches.tar.gz
or from SVN at:
http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed...
_______________________________________________ App_rpt-users mailing
list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Can Zoiper on the iPhone be used like iaxrpt? If so, what Asterisk (from iax.conf?) variables go in each Zoiper field? I've successfully setup iaxrpt on my PC, and would like to use Zoiper to control my nodes in similar fashion. If not, is there an app that would work? Thanks, Bob kk6ecm Sent from iPad
I set this up in my wife's iphone. Believe it or not I do not have a smart phone! It works but it is awkward at least I think it is. There is a putty app for iphone and probably android and if I were just doing commands even connecting and disconnecting nodes I would probably just use that. With putty you can ssh into your server and do anything you can do from the your home console. Of course you can't talk on that. Here is my setup for zopier In Zopier IAX account on iphone server - ip address or domain name of the server. If local and your phone uses your local wireless you need to use the 192.168.x.x or whatever your local network server IP address is. I setup two accounts. One local and one remote with everything the same but the IP address. One is my local server LAN address the other my public domain name - I use noip.com username - myiphone password - same as in iax.conf codecs - ulaw, gsm whatever you want to use. In iax.conf [myiphone] username=myiphone type=friend context=myphone host=dynamic auth=md5 secret=xxxxxxx ; change this! disallow=all allow=ulaw allow=g726aal2 allow=gsm codecpriority=host transfer=no callerid="wa3dsp" ;Change this! In extensions.conf [myphone] exten=27225,1,rpt(27225|P) exten=29014,1,rpt(19014|P) exten=29015,1,rpt(29015|P) exten=40561,1,rpt(40561|P) This shows my nodes - change to the node(s) on your server. 73 Doug WA3DSP http://www.crompton.com/hamradio
From: kk6ecm@gmail.com Date: Tue, 25 Mar 2014 22:31:01 -0400 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Zoiper Setup for iax
Can Zoiper on the iPhone be used like iaxrpt? If so, what Asterisk (from iax.conf?) variables go in each Zoiper field? I've successfully setup iaxrpt on my PC, and would like to use Zoiper to control my nodes in similar fashion.
If not, is there an app that would work?
Thanks, Bob kk6ecm
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
This may answer your question. Thanks, Bob kk6ecm Sent from iPad Begin forwarded message:
From: Doug Crompton <doug@crompton.com> Date: March 25, 2014, 9:43:18 PM PDT To: kk6ecm <kk6ecm@gmail.com> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: RE: [App_rpt-users] Zoiper Setup for iax
I set this up in my wife's iphone. Believe it or not I do not have a smart phone! It works but it is awkward at least I think it is. There is a putty app for iphone and probably android and if I were just doing commands even connecting and disconnecting nodes I would probably just use that. With putty you can ssh into your server and do anything you can do from the your home console. Of course you can't talk on that. Here is my setup for zopier
In Zopier IAX account on iphone
server - ip address or domain name of the server.
If local and your phone uses your local wireless you need to use the 192.168.x.x or whatever your local network server IP address is. I setup two accounts. One local and one remote with everything the same but the IP address. One is my local server LAN address the other my public domain name - I use noip.com
username - myiphone password - same as in iax.conf
codecs - ulaw, gsm whatever you want to use.
In iax.conf
[myiphone] username=myiphone type=friend context=myphone host=dynamic auth=md5 secret=xxxxxxx ; change this! disallow=all allow=ulaw allow=g726aal2 allow=gsm codecpriority=host transfer=no callerid="wa3dsp" ;Change this!
In extensions.conf
[myphone] exten=27225,1,rpt(27225|P) exten=29014,1,rpt(19014|P) exten=29015,1,rpt(29015|P) exten=40561,1,rpt(40561|P)
This shows my nodes - change to the node(s) on your server.
73 Doug WA3DSP http://www.crompton.com/hamradio
From: kk6ecm@gmail.com Date: Tue, 25 Mar 2014 22:31:01 -0400 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Zoiper Setup for iax
Can Zoiper on the iPhone be used like iaxrpt? If so, what Asterisk (from iax.conf?) variables go in each Zoiper field? I've successfully setup iaxrpt on my PC, and would like to use Zoiper to control my nodes in similar fashion.
If not, is there an app that would work?
Thanks, Bob kk6ecm
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Repost of DAHDI patches... -- Tim :wq Begin forwarded message:
From: Jim Duuuude <telesistant@hotmail.com> Subject: [App_rpt-users] "Official" "fixed" DAHDI patches Date: March 25, 2014 at 11:32:09 AM PDT To: app_rpt mailing list <app_rpt-users@ohnosec.org>, "mike@glaserelectronics.com" <mike@glaserelectronics.com>
After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform).
If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work".
This patch set may be obtained from:
https://allstarlink.org/fixed-dahdi-patches.tar.gz
or from SVN at:
http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixed...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (7)
-
Buddy Brannan -
Doug Crompton -
Dwaine Garden VE3GIF -
Jim Duuuude -
kk6ecm -
Michael Hebert -
Tim Sawyer