Ok guys, Hate to be a pain, but i have looked and looked. But cannot finger it out yet. Has anyone worked how to kill all the phonetic connect and disconnect messages yet? We are getting a big network here and it can take forever. In our usage, just a simple tone beep will suffice to lets us know. Any ideas? Chuck K0CMK http://byrg.net
Here are yor options: ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects On 5/30/2010 11:46 AM, Chuck Kraly wrote:
Ok guys, Hate to be a pain, but i have looked and looked. But cannot finger it out yet.
Has anyone worked how to kill all the phonetic connect and disconnect messages yet? We are getting a big network here and it can take forever. In our usage, just a simple tone beep will suffice to lets us know. Any ideas? Chuck K0CMK http://byrg.net
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
If thats not what your looking for this is the only other thing I can find. telemdefault 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter 1 found on *http://app-rpt.qrvc.com/node/103 *On 5/30/2010 12:45 PM, Scott Weis wrote:
Here are yor options:
;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects
On 5/30/2010 11:46 AM, Chuck Kraly wrote:
Ok guys, Hate to be a pain, but i have looked and looked. But cannot finger it out yet.
Has anyone worked how to kill all the phonetic connect and disconnect messages yet? We are getting a big network here and it can take forever. In our usage, just a simple tone beep will suffice to lets us know. Any ideas? Chuck K0CMK http://byrg.net
There is an eannmode setting of 0 See http://app-rpt.qrvc.com/node/107 Ken KE2N From: app_rpt-users-bounces@qrvc.com [mailto:app_rpt-users-bounces@qrvc.com] On Behalf Of Scott Weis Sent: Sunday, May 30, 2010 12:59 PM To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Connect and disconnect messages, If thats not what your looking for this is the only other thing I can find. telemdefault 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter 1 found on http://app-rpt.qrvc.com/node/103 On 5/30/2010 12:45 PM, Scott Weis wrote: Here are yor options: ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects On 5/30/2010 11:46 AM, Chuck Kraly wrote: Ok guys, Hate to be a pain, but i have looked and looked. But cannot finger it out yet. Has anyone worked how to kill all the phonetic connect and disconnect messages yet? We are getting a big network here and it can take forever. In our usage, just a simple tone beep will suffice to lets us know. Any ideas? Chuck K0CMK http://byrg.net
THAT DID IT!!!! I knew I was missing something. Got it set up on 2180, now to change all the other nodes.... Thanks everyone On Sun, May 30, 2010 at 11:59 AM, Scott Weis <kb2ear@kb2ear.net> wrote:
If thats not what your looking for this is the only other thing I can find.
telemdefault 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter 1 found on *http://app-rpt.qrvc.com/node/103
* On 5/30/2010 12:45 PM, Scott Weis wrote:
Here are yor options:
;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects
On 5/30/2010 11:46 AM, Chuck Kraly wrote:
Ok guys, Hate to be a pain, but i have looked and looked. But cannot finger it out yet.
Has anyone worked how to kill all the phonetic connect and disconnect messages yet? We are getting a big network here and it can take forever. In our usage, just a simple tone beep will suffice to lets us know. Any ideas? Chuck K0CMK http://byrg.net
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
yea!!! another satisfied customer!!! :-) Date: Sun, 30 May 2010 12:36:17 -0500 From: ckraly@gmail.com To: kb2ear@kb2ear.net CC: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Connect and disconnect messages, THAT DID IT!!!! I knew I was missing something. Got it set up on 2180, now to change all the other nodes.... Thanks everyone On Sun, May 30, 2010 at 11:59 AM, Scott Weis <kb2ear@kb2ear.net> wrote: If thats not what your looking for this is the only other thing I can find. telemdefault 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry output on command execution and for a short time thereafter 1 found on http://app-rpt.qrvc.com/node/103 On 5/30/2010 12:45 PM, Scott Weis wrote: Here are yor options: ;eannmode=1 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects On 5/30/2010 11:46 AM, Chuck Kraly wrote: Ok guys, Hate to be a pain, but i have looked and looked. But cannot finger it out yet. Has anyone worked how to kill all the phonetic connect and disconnect messages yet? We are getting a big network here and it can take forever. In our usage, just a simple tone beep will suffice to lets us know. Any ideas? Chuck K0CMK http://byrg.net _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
participants (4)
-
Chuck Kraly -
Jim Duuuude -
Ken -
Scott Weis