Ok this is my first time posting on this forum and I would like to thanks everyone that has contributed to the Allstar project it has defiantly added a new dimension to the hobby. We are in the progress trying to get past the learning curve of adding two RTCMs (S/W Version: 1.11 11/04/2012) to our system we currently operate here in Houston Node 28099. I have them currently connected to Kenwood TKR-820s configured as a simple radio interface and audio seems to be ok as set per sw2-2,3 and sw2-4 procedures. I am normally used to setting the audio levels via the radio-tune-menu but I am guessing that will not work in this case as I get an error (Error parsing device parameters) on the server I have the voter.conf files on. So from what I get out of this is the only place to adjust any audio is on the TRCM and in the voter.conf file is that correct? Another question is where do I set the ctcss decode settings as I can set the CTCSS TX in voter.conf but normally the RX CTCSS would be in the usbradio.conf file if it was a URI.. I am just trying to get some pointers on setup and troubleshooting methods for the RTCM. So my main questions are Where is the decode CTCSS set at? Is there a radio-tune-menu for the TRCM? Where is the info that menu item 14 set debug level go so I can view it? More may come later thanks to all :) FYI I have gone through all the post on this reflector to find these answers and read the rtcm_manual I am just stumped for the moment Keep up the good work 73s KC5DAQ
Dude?? First of all, the RTCM has *NOTHING TO DO* with the *decoding* of the CTCSS. That must be provided by an external device, such as a radio, and its result (typically a signal that indicates the presence of valid CTCSS on the receiver's input) needs to be connected to pin 4 of the RTCM. Seconds of all, usbradio.conf and all of the tune-menu stuff doesnt have a THING to do with the RTCM's. Jim WB6NIL
From: kc5daq@gmail.com To: app_rpt-users@ohnosec.org Date: Thu, 3 Jan 2013 13:02:55 -0600 Subject: [App_rpt-users] RTCM CTCSS input Tone settings
Ok this is my first time posting on this forum and I would like to thanks everyone that has contributed to the Allstar project it has defiantly added a new dimension to the hobby.
We are in the progress trying to get past the learning curve of adding two RTCMs (S/W Version: 1.11 11/04/2012) to our system we currently operate here in Houston Node 28099. I have them currently connected to Kenwood TKR-820s configured as a simple radio interface and audio seems to be ok as set per sw2-2,3 and sw2-4 procedures. I am normally used to setting the audio levels via the radio-tune-menu but I am guessing that will not work in this case as I get an error (Error parsing device parameters) on the server I have the voter.conf files on. So from what I get out of this is the only place to adjust any audio is on the TRCM and in the voter.conf file is that correct? Another question is where do I set the ctcss decode settings as I can set the CTCSS TX in voter.conf but normally the RX CTCSS would be in the usbradio.conf file if it was a URI.. I am just trying to get some pointers on setup and troubleshooting methods for the RTCM.
So my main questions are
Where is the decode CTCSS set at? Is there a radio-tune-menu for the TRCM? Where is the info that menu item 14 set debug level go so I can view it? More may come later thanks to all :) FYI I have gone through all the post on this reflector to find these answers and read the rtcm_manual I am just stumped for the moment Keep up the good work 73s KC5DAQ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Ok thanks I just didn't know how much the asterisk server was doing for the RTCM as I would have thought the asterisk might have been doing the CTCSS decoding not the RTCM its self. I changed menu item 12 External CTCSS to 2=Inverted and now it is working correctly. I just needed to be nudged in the right direction.. From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Thursday, January 03, 2013 1:33 PM To: kc5daq@gmail.com; app_rpt mailing list Subject: RE: [App_rpt-users] RTCM CTCSS input Tone settings Dude?? First of all, the RTCM has *NOTHING TO DO* with the *decoding* of the CTCSS. That must be provided by an external device, such as a radio, and its result (typically a signal that indicates the presence of valid CTCSS on the receiver's input) needs to be connected to pin 4 of the RTCM. Seconds of all, usbradio.conf and all of the tune-menu stuff doesnt have a THING to do with the RTCM's. Jim WB6NIL
From: kc5daq@gmail.com To: app_rpt-users@ohnosec.org Date: Thu, 3 Jan 2013 13:02:55 -0600 Subject: [App_rpt-users] RTCM CTCSS input Tone settings
Ok this is my first time posting on this forum and I would like to thanks everyone that has contributed to the Allstar project it has defiantly added a new dimension to the hobby.
We are in the progress trying to get past the learning curve of adding two RTCMs (S/W Version: 1.11 11/04/2012) to our system we currently operate here in Houston Node 28099. I have them currently connected to Kenwood TKR-820s configured as a simple radio interface and audio seems to be ok as set per sw2-2,3 and sw2-4 procedures. I am normally used to setting the audio levels via the radio-tune-menu but I am guessing that will not work in this case as I get an error (Error parsing device parameters) on the server I have the voter.conf files on. So from what I get out of this is the only place to adjust any audio is on the TRCM and in the voter.conf file is that correct? Another question is where do I set the ctcss decode settings as I can set the CTCSS TX in voter.conf but normally the RX CTCSS would be in the usbradio.conf file if it was a URI.. I am just trying to get some pointers on setup and troubleshooting methods for the RTCM.
So my main questions are
Where is the decode CTCSS set at? Is there a radio-tune-menu for the TRCM? Where is the info that menu item 14 set debug level go so I can view it? More may come later thanks to all :) FYI I have gone through all the post on this reflector to find these answers and read the rtcm_manual I am just stumped for the moment Keep up the good work 73s KC5DAQ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Gary Herzog Gmail -
Jim Duuuude