Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI>
And I cant seem to disconnect the link either. When I put in rpt fun 28238 *812560 The node speaks the time. 73 Jim W7RY From: Jim W7RY Sent: Thursday, September 06, 2012 10:03 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Same Old Problem With Node Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI> -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I removed the 81 status 1 and 82 status 2 lines from the rpt config file. Now at least I can disconnect and stop the constant reconnecting attempts. The node shows it’s registered with the system but still can’t connect to anything. Node 28238 Statistics Actual Uptime 4M 30S Total Keyups 4 Total Transmit Time 1M 1S Total Time Outs 0 Total Commands Executed 5 Thanks 73 Jim W7RY From: Jim W7RY Sent: Thursday, September 06, 2012 10:03 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Same Old Problem With Node Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI> -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Your config files seem okay. Your system seems to have good connectivity. Your udp 4569 inbound is working fine. But your system is not registering with 67.215.233.178:4569 as it needs to. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Request Sent The system is not registered, this may be due to having a wrong password in the iax.conf file. re-verify the password (number) login to the allstarlink.org web site and from the menus pick... node node configuration YourServerName Node: 28238 Make sure the password shown here is the same as configured in the iax.conf file. If the password numbers match, which I think they do, then there must be a problem with the registration server relating to your node. Jim Duuuude might need to take a look at this because if you are not registered then you will not be able to download the list of nodes and your node will not be included in the list that other nodes download. This will prevent connectivity to other nodes from working. One other thing. I noticed you are running version 0.287 08/26/2011, I am running version 0.304 05/09/2012. I don't think this would cause this problem but you should probably upgrade to the latest version. Chuck On Fri, Sep 7, 2012 at 12:03 AM, Jim W7RY <w7ry@centurytel.net> wrote:
Same old problem. Even after a reboot.
Does anyone have any ideas?
Thanks 73 Jim W7RY
w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Thanks for your help Chuck! The password is the same. ... Any ideas Duuuuude?? Thanks Jim W7RY From: Chuck Henderson Sent: Friday, September 07, 2012 1:47 AM To: Jim W7RY ; Jim Duuuude Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Same Old Problem With Node Your config files seem okay. Your system seems to have good connectivity. Your udp 4569 inbound is working fine. But your system is not registering with 67.215.233.178:4569 as it needs to. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Request Sent The system is not registered, this may be due to having a wrong password in the iax.conf file. re-verify the password (number) login to the allstarlink.org web site and from the menus pick... node node configuration YourServerName Node: 28238 Make sure the password shown here is the same as configured in the iax.conf file. If the password numbers match, which I think they do, then there must be a problem with the registration server relating to your node. Jim Duuuude might need to take a look at this because if you are not registered then you will not be able to download the list of nodes and your node will not be included in the list that other nodes download. This will prevent connectivity to other nodes from working. One other thing. I noticed you are running version 0.287 08/26/2011, I am running version 0.304 05/09/2012. I don't think this would cause this problem but you should probably upgrade to the latest version. Chuck On Fri, Sep 7, 2012 at 12:03 AM, Jim W7RY <w7ry@centurytel.net> wrote: Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Continuing problem. Node will not register. Any ideas? And yes, all of the passwords are correct. I’ll reboot and see if this helps. Duuuude... Any ideas. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout Thanks! 73 Jim W7RY From: Chuck Henderson Sent: Friday, September 07, 2012 1:47 AM To: Jim W7RY ; Jim Duuuude Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Same Old Problem With Node Your config files seem okay. Your system seems to have good connectivity. Your udp 4569 inbound is working fine. But your system is not registering with 67.215.233.178:4569 as it needs to. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Request Sent The system is not registered, this may be due to having a wrong password in the iax.conf file. re-verify the password (number) login to the allstarlink.org web site and from the menus pick... node node configuration YourServerName Node: 28238 Make sure the password shown here is the same as configured in the iax.conf file. If the password numbers match, which I think they do, then there must be a problem with the registration server relating to your node. Jim Duuuude might need to take a look at this because if you are not registered then you will not be able to download the list of nodes and your node will not be included in the list that other nodes download. This will prevent connectivity to other nodes from working. One other thing. I noticed you are running version 0.287 08/26/2011, I am running version 0.304 05/09/2012. I don't think this would cause this problem but you should probably upgrade to the latest version. Chuck On Fri, Sep 7, 2012 at 12:03 AM, Jim W7RY <w7ry@centurytel.net> wrote: Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
So why wont my node register after sitting for 4 hours after a reboot??? And being able to ping the registration server? And the node being on the DMZ of my router? 73 Jim W7RY 64 bytes from 67.215.233.178: icmp_seq=1 ttl=54 time=62.0 ms 64 bytes from 67.215.233.178: icmp_seq=2 ttl=54 time=34.6 ms 64 bytes from 67.215.233.178: icmp_seq=3 ttl=54 time=34.3 ms --- 67.215.233.178 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 34.345/43.700/62.085/13.000 ms [root@w7ry ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on w7ry (pid = 2125) Verbosity is at least 3 w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout w7ry*CLI> From: Jim W7RY Sent: Wednesday, September 12, 2012 7:10 AM To: Chuck Henderson ; Jim Duuuude Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Same Old Problem With Node Continuing problem. Node will not register. Any ideas? And yes, all of the passwords are correct. I’ll reboot and see if this helps. Duuuude... Any ideas. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout Thanks! 73 Jim W7RY From: Chuck Henderson Sent: Friday, September 07, 2012 1:47 AM To: Jim W7RY ; Jim Duuuude Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Same Old Problem With Node Your config files seem okay. Your system seems to have good connectivity. Your udp 4569 inbound is working fine. But your system is not registering with 67.215.233.178:4569 as it needs to. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Request Sent The system is not registered, this may be due to having a wrong password in the iax.conf file. re-verify the password (number) login to the allstarlink.org web site and from the menus pick... node node configuration YourServerName Node: 28238 Make sure the password shown here is the same as configured in the iax.conf file. If the password numbers match, which I think they do, then there must be a problem with the registration server relating to your node. Jim Duuuude might need to take a look at this because if you are not registered then you will not be able to download the list of nodes and your node will not be included in the list that other nodes download. This will prevent connectivity to other nodes from working. One other thing. I noticed you are running version 0.287 08/26/2011, I am running version 0.304 05/09/2012. I don't think this would cause this problem but you should probably upgrade to the latest version. Chuck On Fri, Sep 7, 2012 at 12:03 AM, Jim W7RY <w7ry@centurytel.net> wrote: Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Server may be running low on authentication sauce. Was anyone else having problems? //Sent from my mobile handheld Star Trek Communicator// -----Original message----- From: Jim W7RY <w7ry@centurytel.net> To: Chuck Henderson <rpt2@chuck.midlandsnetworking.com>, Jim Duuuude <telesistant@hotmail.com> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Sent: Wed, Sep 12, 2012 20:22:24 GMT+00:00 Subject: Re: [App_rpt-users] Same Old Problem With Node So why wont my node register after sitting for 4 hours after a reboot??? And being able to ping the registration server? And the node being on the DMZ of my router? 73 Jim W7RY 64 bytes from 67.215.233.178: icmp_seq=1 ttl=54 time=62.0 ms 64 bytes from 67.215.233.178: icmp_seq=2 ttl=54 time=34.6 ms 64 bytes from 67.215.233.178: icmp_seq=3 ttl=54 time=34.3 ms --- 67.215.233.178 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 34.345/43.700/62.085/13.000 ms [root@w7ry ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on w7ry (pid = 2125) Verbosity is at least 3 w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout w7ry*CLI> From: Jim W7RY<mailto:w7ry@centurytel.net> Sent: Wednesday, September 12, 2012 7:10 AM To: Chuck Henderson<mailto:rpt2@chuck.midlandsnetworking.com> ; Jim Duuuude<mailto:telesistant@hotmail.com> Cc: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Same Old Problem With Node Continuing problem. Node will not register. Any ideas? And yes, all of the passwords are correct. I’ll reboot and see if this helps. Duuuude... Any ideas. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout Thanks! 73 Jim W7RY From: Chuck Henderson<mailto:rpt2@chuck.midlandsnetworking.com> Sent: Friday, September 07, 2012 1:47 AM To: Jim W7RY<mailto:w7ry@centurytel.net> ; Jim Duuuude<mailto:telesistant@hotmail.com> Cc: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Same Old Problem With Node Your config files seem okay. Your system seems to have good connectivity. Your udp 4569 inbound is working fine. But your system is not registering with 67.215.233.178:4569<http://67.215.233.178:4569> as it needs to. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569<http://67.215.233.178:4569> N 28238 <Unregistered> 60 Request Sent The system is not registered, this may be due to having a wrong password in the iax.conf file. re-verify the password (number) login to the allstarlink.org<http://allstarlink.org> web site and from the menus pick... node node configuration YourServerName Node: 28238 Make sure the password shown here is the same as configured in the iax.conf file. If the password numbers match, which I think they do, then there must be a problem with the registration server relating to your node. Jim Duuuude might need to take a look at this because if you are not registered then you will not be able to download the list of nodes and your node will not be included in the list that other nodes download. This will prevent connectivity to other nodes from working. One other thing. I noticed you are running version 0.287 08/26/2011, I am running version 0.304 05/09/2012. I don't think this would cause this problem but you should probably upgrade to the latest version. Chuck On Fri, Sep 7, 2012 at 12:03 AM, Jim W7RY <w7ry@centurytel.net<mailto:w7ry@centurytel.net>> wrote: Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921<tel:2135343921>' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ________________________________ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Stupid Question: Were you able to ping it by hostname and not just the ip address? I realize this might be what you were doing anyway. And sorry to report I don’t have any nodes of my own online at this time. We just moved to a new office and a new home. All my goodies are in piles. ☹ Otherwise I would have tested yesterday. Steve Gladden Michigan Broadband Systems Connecting Your Business! [cid:image001.png@01CD9193.442E2FB0] +1 734.527.7150 Direct +1 248.327.4389 Fax steve@michiganbroadband.com<mailto:steve@michiganbroadband.com> www.michiganbroadband.com<http://www.michiganbroadband.com/> From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Gladden Sent: Thursday, September 13, 2012 8:17 AM To: Jim W7RY; Chuck Henderson; telesistant@hotmail.com Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Same Old Problem With Node Server may be running low on authentication sauce. Was anyone else having problems? //Sent from my mobile handheld Star Trek Communicator// -----Original message----- From: Jim W7RY <w7ry@centurytel.net<mailto:w7ry@centurytel.net>> To: Chuck Henderson <rpt2@chuck.midlandsnetworking.com<mailto:rpt2@chuck.midlandsnetworking.com>>, Jim Duuuude <telesistant@hotmail.com<mailto:telesistant@hotmail.com>> Cc: "app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>" <app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>> Sent: Wed, Sep 12, 2012 20:22:24 GMT+00:00 Subject: Re: [App_rpt-users] Same Old Problem With Node So why wont my node register after sitting for 4 hours after a reboot??? And being able to ping the registration server? And the node being on the DMZ of my router? 73 Jim W7RY 64 bytes from 67.215.233.178: icmp_seq=1 ttl=54 time=62.0 ms 64 bytes from 67.215.233.178: icmp_seq=2 ttl=54 time=34.6 ms 64 bytes from 67.215.233.178: icmp_seq=3 ttl=54 time=34.3 ms --- 67.215.233.178 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 34.345/43.700/62.085/13.000 ms [root@w7ry ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com<mailto:markster@digium.com>> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on w7ry (pid = 2125) Verbosity is at least 3 w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout w7ry*CLI> From: Jim W7RY<mailto:w7ry@centurytel.net> Sent: Wednesday, September 12, 2012 7:10 AM To: Chuck Henderson<mailto:rpt2@chuck.midlandsnetworking.com> ; Jim Duuuude<mailto:telesistant@hotmail.com> Cc: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Same Old Problem With Node Continuing problem. Node will not register. Any ideas? And yes, all of the passwords are correct. I’ll reboot and see if this helps. Duuuude... Any ideas. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout Thanks! 73 Jim W7RY From: Chuck Henderson<mailto:rpt2@chuck.midlandsnetworking.com> Sent: Friday, September 07, 2012 1:47 AM To: Jim W7RY<mailto:w7ry@centurytel.net> ; Jim Duuuude<mailto:telesistant@hotmail.com> Cc: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Same Old Problem With Node Your config files seem okay. Your system seems to have good connectivity. Your udp 4569 inbound is working fine. But your system is not registering with 67.215.233.178:4569<http://67.215.233.178:4569> as it needs to. w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569<http://67.215.233.178:4569> N 28238 <Unregistered> 60 Request Sent The system is not registered, this may be due to having a wrong password in the iax.conf file. re-verify the password (number) login to the allstarlink.org<http://allstarlink.org> web site and from the menus pick... node node configuration YourServerName Node: 28238 Make sure the password shown here is the same as configured in the iax.conf file. If the password numbers match, which I think they do, then there must be a problem with the registration server relating to your node. Jim Duuuude might need to take a look at this because if you are not registered then you will not be able to download the list of nodes and your node will not be included in the list that other nodes download. This will prevent connectivity to other nodes from working. One other thing. I noticed you are running version 0.287 08/26/2011, I am running version 0.304 05/09/2012. I don't think this would cause this problem but you should probably upgrade to the latest version. Chuck On Fri, Sep 7, 2012 at 12:03 AM, Jim W7RY <w7ry@centurytel.net<mailto:w7ry@centurytel.net>> wrote: Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921<tel:2135343921>' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197<tel:208.70.77.197>:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197<tel:208.70.77.197> (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ________________________________ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Chuck Henderson -
Jim W7RY -
Steve Gladden