Re: [App_rpt-users] Stepping on toes...
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused. Steve On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>> To: ARM Allstar <arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org>> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org <http://hamvoip.org/> code. 73 Doug WA3DSP http://www.crompton.com/hamradio
To:arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From:arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> CC:Ramesh@va3uv.com <mailto:Ramesh@va3uv.com>
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs.. Also what is the status on updating asterisk to a more current version?? Any issues with that?? Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: Fax: http://www.lorentedford.com http://kc9zhv.com Sent from Droid Turbo from Verizon wireless network On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com> To: ARM Allstar <arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP http://www.crompton.com/hamradio
To: arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: arm-allstar@hamvoip.org CC: Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP. On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network
On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>> To: ARM Allstar <arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org>> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org <http://hamvoip.org/> code. 73 Doug WA3DSP http://www.crompton.com/hamradio
> To:arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > Date: Sun, 10 Jul 2016 07:34:57 -0400 > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi > From:arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > CC:Ramesh@va3uv.com <mailto:Ramesh@va3uv.com> > > Hi All: > > I am using the DIAL Image on a PRi 2; I would like to use the "A" and > "B" audio outputs from my fob (A for voice and B for PL), so that I can > inject them into separate points on my exciter. > > I was able to get 2 'discrete' audio outputs when running ACID on a PC. > This doesn't seem to be working with the Pi / DIAL. Is anyone running > this configuration on a Pi? > > Thx, > > Ramesh. > > # 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010... Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board.. Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman@msgstor.com> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton < <doug@crompton.com>doug@crompton.com> To: ARM Allstar < <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP http://www.crompton.com/hamradio
To: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org CC: <Ramesh@va3uv.com>Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Time, Energy, drive, people. Just to name a few. On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com <http://www.lorentedford.com/> http://www.kc9zhv.com <http://www.kc9zhv.com/> http://forum.kc9zhv.com <http://forum.kc9zhv.com/> http://hub.kc9zhv.com <http://hub.kc9zhv.com/> http://Ltcraft.net<http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network
On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>> To: ARM Allstar <arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org>> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org <http://hamvoip.org/> code. 73 Doug WA3DSP http://www.crompton.com/hamradio
> To:arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > Date: Sun, 10 Jul 2016 07:34:57 -0400 > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi > From:arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > CC:Ramesh@va3uv.com <mailto:Ramesh@va3uv.com> > > Hi All: > > I am using the DIAL Image on a PRi 2; I would like to use the "A" and > "B" audio outputs from my fob (A for voice and B for PL), so that I can > inject them into separate points on my exciter. > > I was able to get 2 'discrete' audio outputs when running ACID on a PC. > This doesn't seem to be working with the Pi / DIAL. Is anyone running > this configuration on a Pi? > > Thx, > > Ramesh. > > # 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Steve any idea how far we have gotten?? The security threat list is pretty large at the moment.. https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html And honestly the above is probably for more current versions which mean their are probably more threats out their than we really want to think about.. All i know is we can't keep running on this version for ever well i don't think we can.. I guess we may get to the point of apt pinning.. While i am being honest here.. We should probably one day update the mailing list to more of a forum thread some where with actual details etc.. Mailing list seems to be abit old school just my thoughts.. Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman <szingman@msgstor.com> wrote:
Time, Energy, drive, people. Just to name a few.
On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com/>http://www.lorentedford.com <http://www.kc9zhv.com/>http://www.kc9zhv.com <http://forum.kc9zhv.com/>http://forum.kc9zhv.com <http://hub.kc9zhv.com/>http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman@msgstor.com> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton < <doug@crompton.com>doug@crompton.com> To: ARM Allstar < <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP http://www.crompton.com/hamradio
To: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org CC: <Ramesh@va3uv.com>Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Well, I guess I'm old school, or just old. mail lists give me easy access to information. I don't need multiple programs open. I get it on my phone, tablet and multiple desktops. I've seen forum attempts in the past that have failed. ASL is Open Source. The way OS software evolves is when someone identifies a need and takes the initiative to act upon that need. I applaud you for seeing this need, now are you ready for the next step? Can you define the problem? The proposed solution in detail? The steps needed to get there? How it will be tested? This is a great idea, now run with it. Steve On 7/11/2016 2:18 PM, Loren Tedford wrote:
Steve any idea how far we have gotten?? The security threat list is pretty large at the moment.. https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html
And honestly the above is probably for more current versions which mean their are probably more threats out their than we really want to think about..
All i know is we can't keep running on this version for ever well i don't think we can.. I guess we may get to the point of apt pinning..
While i am being honest here.. We should probably one day update the mailing list to more of a forum thread some where with actual details etc.. Mailing list seems to be abit old school just my thoughts..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com <http://www.lorentedford.com/> http://www.kc9zhv.com <http://www.kc9zhv.com/> http://forum.kc9zhv.com <http://forum.kc9zhv.com/> http://hub.kc9zhv.com <http://hub.kc9zhv.com/> http://Ltcraft.net<http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Time, Energy, drive, people. Just to name a few.
On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net<http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network
On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>> To: ARM Allstar <arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org>> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org <http://hamvoip.org/> code. 73 Doug WA3DSP http://www.crompton.com/hamradio
> To: arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > Date: Sun, 10 Jul 2016 07:34:57 -0400 > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi > From: arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > CC: Ramesh@va3uv.com <mailto:Ramesh@va3uv.com> > > Hi All: > > I am using the DIAL Image on a PRi 2; I would like to use the "A" and > "B" audio outputs from my fob (A for voice and B for PL), so that I can > inject them into separate points on my exciter. > > I was able to get 2 'discrete' audio outputs when running ACID on a PC. > This doesn't seem to be working with the Pi / DIAL. Is anyone running > this configuration on a Pi? > > Thx, > > Ramesh. > > # 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Well i have a virtualized environment out in a data center environment what better way of testing some thing that putting it right out their with the rest of the stuff.. Now where do we begin? I know absolutely nothing about coding however I do know if we don't do some thing fast we will be left behind and the tools others may have had available to port their stuff through may not be available for us.. I would love work on this project but its not just going to be me alone their needs to be others interested in it too... Now moving on how far are we to where.. I read some thing awhile back where some one was working on a new branch of asterisk not sure how big of a leap it was but it would be nice to see us catching up with the more current version of asterisk with in a couple of years.. If that project died then where do we start anyone?? Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> On Mon, Jul 11, 2016 at 1:26 PM, Steve Zingman <szingman@msgstor.com> wrote:
Well, I guess I'm old school, or just old. mail lists give me easy access to information. I don't need multiple programs open. I get it on my phone, tablet and multiple desktops. I've seen forum attempts in the past that have failed.
ASL is Open Source. The way OS software evolves is when someone identifies a need and takes the initiative to act upon that need. I applaud you for seeing this need, now are you ready for the next step? Can you define the problem? The proposed solution in detail? The steps needed to get there? How it will be tested? This is a great idea, now run with it.
Steve
On 7/11/2016 2:18 PM, Loren Tedford wrote:
Steve any idea how far we have gotten?? The security threat list is pretty large at the moment.. https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html
And honestly the above is probably for more current versions which mean their are probably more threats out their than we really want to think about..
All i know is we can't keep running on this version for ever well i don't think we can.. I guess we may get to the point of apt pinning..
While i am being honest here.. We should probably one day update the mailing list to more of a forum thread some where with actual details etc.. Mailing list seems to be abit old school just my thoughts..
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com/>http://www.lorentedford.com <http://www.kc9zhv.com/>http://www.kc9zhv.com <http://forum.kc9zhv.com/>http://forum.kc9zhv.com <http://hub.kc9zhv.com/>http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Time, Energy, drive, people. Just to name a few.
On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com>http://www.lorentedford.com <http://www.kc9zhv.com>http://www.kc9zhv.com <http://forum.kc9zhv.com>http://forum.kc9zhv.com <http://hub.kc9zhv.com>http://hub.kc9zhv.com <http://ltcraft.net/>http://Ltcraft.net
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman@msgstor.com> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: <lorentedford@gmail.com>lorentedford@gmail.com Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network On Jul 11, 2016 12:34 PM, "Steve Zingman" < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton < <doug@crompton.com>doug@crompton.com> To: ARM Allstar < <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP <http://www.crompton.com/hamradio>http://www.crompton.com/hamradio
To: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org CC: <Ramesh@va3uv.com>Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
There have been discussion as to how to move forward. The people involved are the people that will do the work. We can not be "left behind" and the tools needed are available. app_rpt is Open Source, Asterisk is Open Source. The concepts and methods used by app_rpt are readily apparent. They can be re-created. I think we have beaten the horse to death. An I owned a horse, so no one should take offense at as old adage. 73, Steve N4IRS INAD On 7/11/2016 2:33 PM, Loren Tedford wrote:
Well i have a virtualized environment out in a data center environment what better way of testing some thing that putting it right out their with the rest of the stuff..
Now where do we begin? I know absolutely nothing about coding however I do know if we don't do some thing fast we will be left behind and the tools others may have had available to port their stuff through may not be available for us..
I would love work on this project but its not just going to be me alone their needs to be others interested in it too... Now moving on how far are we to where.. I read some thing awhile back where some one was working on a new branch of asterisk not sure how big of a leap it was but it would be nice to see us catching up with the more current version of asterisk with in a couple of years..
If that project died then where do we start anyone??
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com <http://www.lorentedford.com/> http://www.kc9zhv.com <http://www.kc9zhv.com/> http://forum.kc9zhv.com <http://forum.kc9zhv.com/> http://hub.kc9zhv.com <http://hub.kc9zhv.com/> http://Ltcraft.net<http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:26 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Well, I guess I'm old school, or just old. mail lists give me easy access to information. I don't need multiple programs open. I get it on my phone, tablet and multiple desktops. I've seen forum attempts in the past that have failed.
ASL is Open Source. The way OS software evolves is when someone identifies a need and takes the initiative to act upon that need. I applaud you for seeing this need, now are you ready for the next step? Can you define the problem? The proposed solution in detail? The steps needed to get there? How it will be tested? This is a great idea, now run with it.
Steve
On 7/11/2016 2:18 PM, Loren Tedford wrote:
Steve any idea how far we have gotten?? The security threat list is pretty large at the moment.. https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html
And honestly the above is probably for more current versions which mean their are probably more threats out their than we really want to think about..
All i know is we can't keep running on this version for ever well i don't think we can.. I guess we may get to the point of apt pinning..
While i am being honest here.. We should probably one day update the mailing list to more of a forum thread some where with actual details etc.. Mailing list seems to be abit old school just my thoughts..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net<http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Time, Energy, drive, people. Just to name a few.
On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network
On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>> To: ARM Allstar <arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org>> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org <http://hamvoip.org/> code. 73 Doug WA3DSP http://www.crompton.com/hamradio
> To: arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > Date: Sun, 10 Jul 2016 07:34:57 -0400 > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi > From: arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > CC: Ramesh@va3uv.com <mailto:Ramesh@va3uv.com> > > Hi All: > > I am using the DIAL Image on a PRi 2; I would like to use the "A" and > "B" audio outputs from my fob (A for voice and B for PL), so that I can > inject them into separate points on my exciter. > > I was able to get 2 'discrete' audio outputs when running ACID on a PC. > This doesn't seem to be working with the Pi / DIAL. Is anyone running > this configuration on a Pi? > > Thx, > > Ramesh. > > # 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Well i am glad to see their is a project in the works I haven't heard any updates in a few months and was growing concerned I guess I will continue to be patient until it arrives.. Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> On Mon, Jul 11, 2016 at 1:40 PM, Steve Zingman <szingman@msgstor.com> wrote:
There have been discussion as to how to move forward. The people involved are the people that will do the work. We can not be "left behind" and the tools needed are available. app_rpt is Open Source, Asterisk is Open Source. The concepts and methods used by app_rpt are readily apparent. They can be re-created.
I think we have beaten the horse to death. An I owned a horse, so no one should take offense at as old adage.
73, Steve N4IRS INAD
On 7/11/2016 2:33 PM, Loren Tedford wrote:
Well i have a virtualized environment out in a data center environment what better way of testing some thing that putting it right out their with the rest of the stuff..
Now where do we begin? I know absolutely nothing about coding however I do know if we don't do some thing fast we will be left behind and the tools others may have had available to port their stuff through may not be available for us..
I would love work on this project but its not just going to be me alone their needs to be others interested in it too... Now moving on how far are we to where.. I read some thing awhile back where some one was working on a new branch of asterisk not sure how big of a leap it was but it would be nice to see us catching up with the more current version of asterisk with in a couple of years..
If that project died then where do we start anyone??
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com/>http://www.lorentedford.com <http://www.kc9zhv.com/>http://www.kc9zhv.com <http://forum.kc9zhv.com/>http://forum.kc9zhv.com <http://hub.kc9zhv.com/>http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:26 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Well, I guess I'm old school, or just old. mail lists give me easy access to information. I don't need multiple programs open. I get it on my phone, tablet and multiple desktops. I've seen forum attempts in the past that have failed.
ASL is Open Source. The way OS software evolves is when someone identifies a need and takes the initiative to act upon that need. I applaud you for seeing this need, now are you ready for the next step? Can you define the problem? The proposed solution in detail? The steps needed to get there? How it will be tested? This is a great idea, now run with it.
Steve
On 7/11/2016 2:18 PM, Loren Tedford wrote:
Steve any idea how far we have gotten?? The security threat list is pretty large at the moment.. https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html
And honestly the above is probably for more current versions which mean their are probably more threats out their than we really want to think about..
All i know is we can't keep running on this version for ever well i don't think we can.. I guess we may get to the point of apt pinning..
While i am being honest here.. We should probably one day update the mailing list to more of a forum thread some where with actual details etc.. Mailing list seems to be abit old school just my thoughts..
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com>http://www.lorentedford.com <http://www.kc9zhv.com>http://www.kc9zhv.com <http://forum.kc9zhv.com>http://forum.kc9zhv.com <http://hub.kc9zhv.com>http://hub.kc9zhv.com <http://ltcraft.net/>http://Ltcraft.net
On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Time, Energy, drive, people. Just to name a few.
On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com>http://www.lorentedford.com <http://www.kc9zhv.com>http://www.kc9zhv.com <http://forum.kc9zhv.com>http://forum.kc9zhv.com <http://hub.kc9zhv.com>http://hub.kc9zhv.com <http://Ltcraft.net>http://Ltcraft.net
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: <lorentedford@gmail.com>lorentedford@gmail.com Phone: Fax: <http://www.lorentedford.com>http://www.lorentedford.com <http://kc9zhv.com>http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network On Jul 11, 2016 12:34 PM, "Steve Zingman" < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton < <doug@crompton.com>doug@crompton.com> To: ARM Allstar < <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP <http://www.crompton.com/hamradio>http://www.crompton.com/hamradio
To: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org CC: <Ramesh@va3uv.com>Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman < <szingman@msgstor.com>szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list <App_rpt-users@ohnosec.org>App_rpt-users@ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Well i am glad to see their is a project in the works I haven't heard any updates in a few months and was growing concerned I guess I will Loren Tedford (KC9ZHV) Phone:618-553-0806 Fax: 1-618-551-2755 Email: lorentedford@gmail.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> On Mon, Jul 11, 2016 at 1:40 PM, Steve Zingman <szingman@msgstor.com> wrote:
There have been discussion as to how to move forward. The people involved are the people that will do the work. We can not be "left behind" and the tools needed are available. app_rpt is Open Source, Asterisk is Open Source. The concepts and methods used by app_rpt are readily apparent. They can be re-created.
I think we have beaten the horse to death. An I owned a horse, so no one should take offense at as old adage.
73, Steve N4IRS INAD
On 7/11/2016 2:33 PM, Loren Tedford wrote:
Well i have a virtualized environment out in a data center environment what better way of testing some thing that putting it right out their with the rest of the stuff..
Now where do we begin? I know absolutely nothing about coding however I do know if we don't do some thing fast we will be left behind and the tools others may have had available to port their stuff through may not be available for us..
I would love work on this project but its not just going to be me alone their needs to be others interested in it too... Now moving on how far are we to where.. I read some thing awhile back where some one was working on a new branch of asterisk not sure how big of a leap it was but it would be nice to see us catching up with the more current version of asterisk with in a couple of years..
If that project died then where do we start anyone??
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com/>http://www.lorentedford.com <http://www.kc9zhv.com/>http://www.kc9zhv.com <http://forum.kc9zhv.com/>http://forum.kc9zhv.com <http://hub.kc9zhv.com/>http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:26 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Well, I guess I'm old school, or just old. mail lists give me easy access to information. I don't need multiple programs open. I get it on my phone, tablet and multiple desktops. I've seen forum attempts in the past that have failed.
ASL is Open Source. The way OS software evolves is when someone identifies a need and takes the initiative to act upon that need. I applaud you for seeing this need, now are you ready for the next step? Can you define the problem? The proposed solution in detail? The steps needed to get there? How it will be tested? This is a great idea, now run with it.
Steve
On 7/11/2016 2:18 PM, Loren Tedford wrote:
Steve any idea how far we have gotten?? The security threat list is pretty large at the moment.. https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html
And honestly the above is probably for more current versions which mean their are probably more threats out their than we really want to think about..
All i know is we can't keep running on this version for ever well i don't think we can.. I guess we may get to the point of apt pinning..
While i am being honest here.. We should probably one day update the mailing list to more of a forum thread some where with actual details etc.. Mailing list seems to be abit old school just my thoughts..
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com>http://www.lorentedford.com <http://www.kc9zhv.com>http://www.kc9zhv.com <http://forum.kc9zhv.com>http://forum.kc9zhv.com <http://hub.kc9zhv.com>http://hub.kc9zhv.com <http://ltcraft.net/>http://Ltcraft.net
On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Time, Energy, drive, people. Just to name a few.
On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: <lorentedford@gmail.com>lorentedford@gmail.com Email: <KC9ZHV@KC9ZHV.com>KC9ZHV@KC9ZHV.com <http://www.lorentedford.com>http://www.lorentedford.com <http://www.kc9zhv.com>http://www.kc9zhv.com <http://forum.kc9zhv.com>http://forum.kc9zhv.com <http://hub.kc9zhv.com>http://hub.kc9zhv.com <http://Ltcraft.net>http://Ltcraft.net
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: <lorentedford@gmail.com>lorentedford@gmail.com Phone: Fax: <http://www.lorentedford.com>http://www.lorentedford.com <http://kc9zhv.com>http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network On Jul 11, 2016 12:34 PM, "Steve Zingman" < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton < <doug@crompton.com>doug@crompton.com> To: ARM Allstar < <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP <http://www.crompton.com/hamradio>http://www.crompton.com/hamradio
To: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: <arm-allstar@hamvoip.org>arm-allstar@hamvoip.org CC: <Ramesh@va3uv.com>Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman < <szingman@msgstor.com>szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list <App_rpt-users@ohnosec.org>App_rpt-users@ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Right there with ya. As for updgrading, updating, better; I hate it. It irritates me to no end when an upgrade are made for the sake of upgrades. Yes, security issues trump, but that's not what I'm talking about. If something works, then it works. My favorite is when a useful bit of software gets an upgrade and now no longer works like it did or even on the same host os. Or the host os just has to have an upgrade so you can have 3d wallpaper that senses your stench support and now your video editing software no longer works. Etc etc. Change for the sake of change is a pain in the botox (sp on purpose) Money maker in the commercial sector, what the crap! in the open source world. And yes, I'm an old bitter man. My education came in the form of cobol and fortran77 with pascal for playtime. :) Chris KB0WLF -snip- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Zingman Sent: Monday, July 11, 2016 1:26 PM To: Loren Tedford Cc: 'Allstar app_rpt-users Group' Subject: Re: [App_rpt-users] Stepping on toes... Well, I guess I'm old school, or just old. mail lists give me easy access to information. I don't need multiple programs open. I get it on my phone, tablet and multiple desktops. I've seen forum attempts in the past that have failed. -snip-
How would apt-pinning effect the issues. Other then people updating their kernel without thought to the fact that the kernel headers are needed to re-compile. Debian 8 is current and security updates happen all the time. On 7/11/2016 2:18 PM, Loren Tedford wrote:
Steve any idea how far we have gotten?? The security threat list is pretty large at the moment.. https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html
And honestly the above is probably for more current versions which mean their are probably more threats out their than we really want to think about..
All i know is we can't keep running on this version for ever well i don't think we can.. I guess we may get to the point of apt pinning..
While i am being honest here.. We should probably one day update the mailing list to more of a forum thread some where with actual details etc.. Mailing list seems to be abit old school just my thoughts..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com <http://www.lorentedford.com/> http://www.kc9zhv.com <http://www.kc9zhv.com/> http://forum.kc9zhv.com <http://forum.kc9zhv.com/> http://hub.kc9zhv.com <http://hub.kc9zhv.com/> http://Ltcraft.net<http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Time, Energy, drive, people. Just to name a few.
On 7/11/2016 2:08 PM, Loren Tedford wrote:
Ok so what are missing to get the development started on a more current version of asterisk?? Lets face it 1.4.23 went out of professional service back in like 2010...
Just saying we really need to start thinking more about the future now rather than waiting till we have mass issues across the board..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net<http://ltcraft.net/>
On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
It's going to taker a LOT of work to change versions of Asterisk. That's not to say it will not happen. I can't re-create you crashes. I firewall my boxes to only allow access from trusted addresses for ssh. I use a VPN for roaming users. I don't support SIP.
On 7/11/2016 2:02 PM, Loren Tedford wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network
On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote:
Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>> To: ARM Allstar <arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org>> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org <http://hamvoip.org/> code. 73 Doug WA3DSP http://www.crompton.com/hamradio
> To: arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > Date: Sun, 10 Jul 2016 07:34:57 -0400 > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi > From: arm-allstar@hamvoip.org <mailto:arm-allstar@hamvoip.org> > CC: Ramesh@va3uv.com <mailto:Ramesh@va3uv.com> > > Hi All: > > I am using the DIAL Image on a PRi 2; I would like to use the "A" and > "B" audio outputs from my fob (A for voice and B for PL), so that I can > inject them into separate points on my exciter. > > I was able to get 2 'discrete' audio outputs when running ACID on a PC. > This doesn't seem to be working with the Pi / DIAL. Is anyone running > this configuration on a Pi? > > Thx, > > Ramesh. > > # 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote:
I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
if you have ports exposed to the net, you will be probed, and occasionally flooded by attempts to crash your system(s). Mostly Chinese and eastern European actors. The current market, worldwide, for information security, is in the hundreds of billions of dollars being spent in research, development, analysis, etc. and there are currently, in the US, an estimated 500k job openings that are going unfilled; by 2020, it's estimated that number will grow to 1 MILLION open requisitions. Hopeless? No, but you have to be right 100% of the time...the thugs only have to be right once. What you're seeing is nothing new; since I entered the field in '88, the same patterns of activity have been going on, and what has developed is a lot of appliances and FUD being used to sell said appliances, but, the same types of issues are there. So...what to do? 1. Minimize the attack surface. Repeat the maxim "That which is not expressly permitted is prohibited" until it becomes second nature. Your boundary should be, as much as possible if you are providing services, statically configured. uPNP is there for the clueless so they can play xbox and watch tv on Sling. Turn it off. static IP inside, port forwarding strictly enforced. PITA? Yes. Just do it. keep records. the crooks do. 2. Minimize attack surface on your systems. Stuff is cheap enough that, if you need multiple services (mail, Squid, app-rpt, web, whatever) you can stand up purpose-built servers for those services very cheaply. Divide and conquer; if your mail server gets hacked, it only affects your mail server, not your doc store, web server, asterisk, etc. 3. Strong passwords. like Real Strong. 8 is not enough anymore. upper, lower, special characters, numbers. each single character more than 8 is a magnitude greater to hack. 4. back to 2; if you aren't using a service (print, etc), turn it off on the system that doesn't need it. it's just shutting down another exploit vector. 5. Think like a criminal who is looking to subvert your connection. And if something doesn't feel right, it isn't, and requires some work on your part. open source scripts and such are a good start, but not the only answer. 6. Go to your local bookstore and find a good book on network security and read it. Google best practices from known good vendors (IBM, AT&T, NIST, etc). If you are going to play on the network, you darn well better know the minefield you are walking into. -- Bryan Boyle, CISSP/GIAC/CISM WB0YLE Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Jul 11, 2016, at 14:02, Loren Tedford <lorentedford@gmail.com> wrote:
I suppose while we are stepping on toes I want to ask about the proper way of securing a dial box from our wonderful hackers out their.. Been using ufw and fail2ban but found out recently nothing is invincible.. any thoughts?? By the way any progress on asterisk crashes?? I can't find a reason for the crashes in the logs..
Also what is the status on updating asterisk to a more current version?? Any issues with that??
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com Phone: Fax: http://www.lorentedford.com http://kc9zhv.com
Sent from Droid Turbo from Verizon wireless network
On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman@msgstor.com> wrote: Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote: Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com> To: ARM Allstar <arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP http://www.crompton.com/hamradio
To: arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: arm-allstar@hamvoip.org CC: Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote: I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
it was on the arm list. a little curt, i thought. but, it was what it was. -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Jul 11, 2016, at 13:33, Steve Zingman <szingman@msgstor.com> wrote:
Yes, I've seen it before. Ramesh asked the question here and a couple of us had some questions as to his configuration. I think he is in process of gathering info so we can trouble shoot more. I't not hard to get lists confused.
Steve
On 7/11/2016 1:30 PM, DuaneVT . wrote: Thanks Steve. You have helped me several times here I believe. Perhaps it was the ARM Allstar list I should have ranted to. As some posts get shared between lists, it is hard not to end up on another list. Here is an example. I felt for the questioner... "Message: 3 Date: Sun, 10 Jul 2016 09:53:39 -0400 From: Doug Crompton <doug@crompton.com> To: ARM Allstar <arm-allstar@hamvoip.org> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Ramesh,
This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org code. 73 Doug WA3DSP http://www.crompton.com/hamradio
To: arm-allstar@hamvoip.org Date: Sun, 10 Jul 2016 07:34:57 -0400 Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image on a RPi From: arm-allstar@hamvoip.org CC: Ramesh@va3uv.com
Hi All:
I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi?
Thx,
Ramesh.
# 27919 and a truck load of others! "
Sheesh, I want to help everyone.... Thanks again until my next question HERE, Duane
On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman@msgstor.com> wrote:
Duane, When were you told on the App_rpt-users list to go elsewhere with DIAL questions? DIAL is the official distribution for AllStar. Support questions SHOULD be posted here. I know that other lists limit their support to THEIR distribution and have curtly told DIAL users to go elsewhere for support. I do not remember seeing your question on here. If I missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk questions when possible.
73, Steve N4IRS INAD
On 7/11/2016 12:42 PM, DuaneVT . wrote: I too have asked questions here concerning DIAL and been told curtly to go elsewhere. As DIAL distros have all the files included and interface to the FOBs and SBCs, where do we draw the line? I have followed all instructions for installing the software and had fresh boot problems. It was hard to tell where the problem was, but when I am new to Linux/DIAL and the whole Allstar project, I looked for guidance where I found discussions. There is an Allstar Link community on Google+, and you will see I have all except 1 postings! Crickets......... Perhaps the moderator/users here could post a list of URLs for different aspects of AllStar Link so us Newbies would know where to hang out. I have had GREAT support from other listers here by direct email after each post and I sincerely thank all who have taken an interest in someone who has to learn as we all do. 73, Duane KA1LM #42996
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bryan D. Boyle -
Chris Curtis -
Loren Tedford -
Steve Zingman