A friend of mine asked me to help him with replacing two of his older Dell PC installations with Raspberry Pi 2's. I've ordered several Raspberry Pi2's in the past from Amazon. When I ordered his two, I used the "Reorder" button from a previous Pi2 order. When they arrived, they were the latest model Pi3. <sigh> Anyway - has anyone here tried installing the DIAL image for the Pi2 on a Pi3, and if so, what were your results? I've already asked the developers and the answer is - "it should work". I'm going to try it, but I wondered if anyone had already and what they experienced. Thanks, Kevin Custer - W3KKC
All of the documentation says that the hardware is fully compatible... I have one that I will be building a repeater on top of myself. JJC N0PKT On Mon, Mar 21, 2016 at 1:43 PM, Kevin Custer <kuggie@kuggie.com> wrote:
A friend of mine asked me to help him with replacing two of his older Dell PC installations with Raspberry Pi 2's. I've ordered several Raspberry Pi2's in the past from Amazon. When I ordered his two, I used the "Reorder" button from a previous Pi2 order. When they arrived, they were the latest model Pi3. <sigh>
Anyway - has anyone here tried installing the DIAL image for the Pi2 on a Pi3, and if so, what were your results?
I've already asked the developers and the answer is - "it should work". I'm going to try it, but I wondered if anyone had already and what they experienced.
Thanks, Kevin Custer - W3KKC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The PI 3 has a 64-bit processor and the old PI 2 was only 32-bit, so you may run into issues. Ryan W9UEY On Mon, Mar 21, 2016 at 2:47 PM, JJC <cummingsj@gmail.com> wrote:
All of the documentation says that the hardware is fully compatible... I have one that I will be building a repeater on top of myself.
JJC N0PKT
On Mon, Mar 21, 2016 at 1:43 PM, Kevin Custer <kuggie@kuggie.com> wrote:
A friend of mine asked me to help him with replacing two of his older Dell PC installations with Raspberry Pi 2's. I've ordered several Raspberry Pi2's in the past from Amazon. When I ordered his two, I used the "Reorder" button from a previous Pi2 order. When they arrived, they were the latest model Pi3. <sigh>
Anyway - has anyone here tried installing the DIAL image for the Pi2 on a Pi3, and if so, what were your results?
I've already asked the developers and the answer is - "it should work". I'm going to try it, but I wondered if anyone had already and what they experienced.
Thanks, Kevin Custer - W3KKC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 3/21/2016 10:31 PM, Ryan Schultz wrote:
The PI 3 has a 64-bit processor and the old PI 2 was only 32-bit, so you may run into issues. My friend who is the 3d printing community posted that his software (octoprint) does not run on the Pi3 unless you upgrade to the latest Debian Kernel. I expect you will have the same problem with other software too.
Geoff. -- Geoffrey S. Mendelson 4X1GM/N3OWJ Jerusalem Israel.
What is the difference between ALLSTAR PI 3 efforts in the US and the UK? There is a recompiled PI 3 version at the UK ALLSTAR site. I was looking at that until I read it does not yet support built-in WiFi. See this very short video: http://youtu.be/RjUHJ0DFon4 KB9WKR Bill Bussell Sent from my iPad
On Mar 21, 2016, at 7:26 PM, geoffrey mendelson <geoffreymendelson@gmail.com> wrote:
On 3/21/2016 10:31 PM, Ryan Schultz wrote: The PI 3 has a 64-bit processor and the old PI 2 was only 32-bit, so you may run into issues. My friend who is the 3d printing community posted that his software (octoprint) does not run on the Pi3 unless you upgrade to the latest Debian Kernel. I expect you will have the same problem with other software too.
Geoff.
-- Geoffrey S. Mendelson 4X1GM/N3OWJ Jerusalem Israel.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
It's a separate effort. I have not received my RPi3 yet. I have a few changes planned for the next rev for the Raspberry Pi2 and Pi3. 73, Steve N4IRS On 03/21/2016 08:14 PM, Te Bussell wrote:
What is the difference between ALLSTAR PI 3 efforts in the US and the UK?
There is a recompiled PI 3 version at the UK ALLSTAR site. I was looking at that until I read it does not yet support built-in WiFi.
See this very short video: http://youtu.be/RjUHJ0DFon4
KB9WKR
Bill Bussell
Sent from my iPad
On Mar 21, 2016, at 7:26 PM, geoffrey mendelson <geoffreymendelson@gmail.com> wrote:
On 3/21/2016 10:31 PM, Ryan Schultz wrote:
The PI 3 has a 64-bit processor and the old PI 2 was only 32-bit, so you may run into issues. My friend who is the 3d printing community posted that his software (octoprint) does not run on the Pi3 unless you upgrade to the latest Debian Kernel. I expect you will have the same problem with other software too.
Geoff.
-- Geoffrey S. Mendelson 4X1GM/N3OWJ Jerusalem Israel.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
well....I'd just burn a card and see. worst is that nothing happens...best is that it works? Not like the card will immolate or cause TMI to meltdown...realise it sounds like crowbar engineering, but sometimes things surprise you, right? -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Mar 21, 2016, at 15:43, Kevin Custer <kuggie@kuggie.com> wrote:
A friend of mine asked me to help him with replacing two of his older Dell PC installations with Raspberry Pi 2's. I've ordered several Raspberry Pi2's in the past from Amazon. When I ordered his two, I used the "Reorder" button from a previous Pi2 order. When they arrived, they were the latest model Pi3. <sigh>
Anyway - has anyone here tried installing the DIAL image for the Pi2 on a Pi3, and if so, what were your results?
I've already asked the developers and the answer is - "it should work". I'm going to try it, but I wondered if anyone had already and what they experienced.
Thanks, Kevin Custer - W3KKC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (7)
-
Bryan D. Boyle -
geoffrey mendelson -
JJC -
Kevin Custer -
Ryan Schultz -
Steve Zingman -
Te Bussell