simpleusb.conf setting rxondelay=x to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay. Anyone? Saw another identical post from 2011 and there was NO reply! Thanks... KJ6KO __________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
rxondelay only works with usbradio, it does not work with simpleusb. 73 de K0JSC On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko@innercite.com> wrote:
** simpleusb.conf setting* rxondelay=x* to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay.
Anyone? Saw another identical post from 2011 and there was NO reply!
Thanks...
KJ6KO
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
That explains a lot, except why it is even in the simpleusb.conf file in the first place. I have heard that you can use usbradio.conf to drive the DMK URI but have never tried it. Will it work then or is it a DMK thing? Thanks.... ----- Original Message ----- From: Jeff Carrier To: KJ6KO Cc: app_rpt mailing list Sent: Wednesday, August 28, 2013 8:28 AM Subject: Re: [App_rpt-users] RXONDELAY not working? rxondelay only works with usbradio, it does not work with simpleusb. 73 de K0JSC On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko@innercite.com> wrote: simpleusb.conf setting rxondelay=x to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay. Anyone? Saw another identical post from 2011 and there was NO reply! Thanks... KJ6KO __________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users __________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
you SHOULD be using usbradio for the DMK vice simpleusb, if you have the horsepower in the box. lot more capability and flexibility. open to correction if wrong. -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings... On Aug 28, 2013, at 11:52, "KJ6KO" <kj6ko@innercite.com> wrote:
That explains a lot, except why it is even in the simpleusb.conf file in the first place.
I have heard that you can use usbradio.conf to drive the DMK URI but have never tried it. Will it work then or is it a DMK thing?
Thanks.... ----- Original Message ----- From: Jeff Carrier To: KJ6KO Cc: app_rpt mailing list Sent: Wednesday, August 28, 2013 8:28 AM Subject: Re: [App_rpt-users] RXONDELAY not working?
rxondelay only works with usbradio, it does not work with simpleusb.
73 de K0JSC
On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko@innercite.com> wrote:
simpleusb.conf setting rxondelay=x to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay.
Anyone? Saw another identical post from 2011 and there was NO reply!
Thanks...
KJ6KO
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
It works with any usb devices as far as I know. Usbradio gives you DSP support and SimpleUSB has no DSP support. As long as the processor in your node has enough horsepower USBRADIO should be fine. see this post to change from simple usb to usb radio. http://ohnosec.org/pipermail/app_rpt-users/2011-October/003235.html On Wed, Aug 28, 2013 at 9:52 AM, KJ6KO <kj6ko@innercite.com> wrote:
** That explains a lot, except why it is even in the simpleusb.conf file in the first place.
I have heard that you can use usbradio.conf to drive the DMK URI but have never tried it. Will it work then or is it a DMK thing?
Thanks....
----- Original Message ----- *From:* Jeff Carrier <k0jsc.jeff@gmail.com> *To:* KJ6KO <kj6ko@innercite.com> *Cc:* app_rpt mailing list <App_rpt-users@ohnosec.org> *Sent:* Wednesday, August 28, 2013 8:28 AM *Subject:* Re: [App_rpt-users] RXONDELAY not working?
rxondelay only works with usbradio, it does not work with simpleusb.
73 de K0JSC
On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko@innercite.com> wrote:
** simpleusb.conf setting* rxondelay=x* to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay.
Anyone? Saw another identical post from 2011 and there was NO reply!
Thanks...
KJ6KO
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
What kind of "horsepower" are we talking about? memory or processor or both? Running 2.6G with 1.5G of memory. Was planning on stealing .5G for another box. Would 1G be enough after the robbery? Entire system only seems to use less than 0.4G now. Thanks for the link too! I will look into it! I may be able to drop the rptr's PL sooner also. I like to keep things simple! ----- Original Message ----- From: Jeff Carrier To: KJ6KO Cc: app_rpt mailing list Sent: Wednesday, August 28, 2013 8:59 AM Subject: Re: [App_rpt-users] RXONDELAY not working? It works with any usb devices as far as I know. Usbradio gives you DSP support and SimpleUSB has no DSP support. As long as the processor in your node has enough horsepower USBRADIO should be fine. see this post to change from simple usb to usb radio. http://ohnosec.org/pipermail/app_rpt-users/2011-October/003235.html On Wed, Aug 28, 2013 at 9:52 AM, KJ6KO <kj6ko@innercite.com> wrote: That explains a lot, except why it is even in the simpleusb.conf file in the first place. I have heard that you can use usbradio.conf to drive the DMK URI but have never tried it. Will it work then or is it a DMK thing? Thanks.... ----- Original Message ----- From: Jeff Carrier To: KJ6KO Cc: app_rpt mailing list Sent: Wednesday, August 28, 2013 8:28 AM Subject: Re: [App_rpt-users] RXONDELAY not working? rxondelay only works with usbradio, it does not work with simpleusb. 73 de K0JSC On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko@innercite.com> wrote: simpleusb.conf setting rxondelay=x to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay. Anyone? Saw another identical post from 2011 and there was NO reply! Thanks... KJ6KO __________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users __________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 8738 (20130828) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
I'm running an hp thinclient that has a single core processor at barely over 1 ghz with like 512mb of ram and it's ok. It is not running full duplex audio though. It has two simplex link radios attached. This installation is how I found out RXONDELAY wouldn't work with simple usb. On Wed, Aug 28, 2013 at 10:15 AM, KJ6KO <kj6ko@innercite.com> wrote:
** What kind of "horsepower" are we talking about? memory or processor or both? Running 2.6G with 1.5G of memory. Was planning on stealing .5G for another box. Would 1G be enough after the robbery? Entire system only seems to use less than 0.4G now.
Thanks for the link too! I will look into it! I may be able to drop the rptr's PL sooner also. I like to keep things simple!
----- Original Message ----- *From:* Jeff Carrier <k0jsc.jeff@gmail.com> *To:* KJ6KO <kj6ko@innercite.com> *Cc:* app_rpt mailing list <App_rpt-users@ohnosec.org> *Sent:* Wednesday, August 28, 2013 8:59 AM *Subject:* Re: [App_rpt-users] RXONDELAY not working?
It works with any usb devices as far as I know. Usbradio gives you DSP support and SimpleUSB has no DSP support. As long as the processor in your node has enough horsepower USBRADIO should be fine. see this post to change from simple usb to usb radio. http://ohnosec.org/pipermail/app_rpt-users/2011-October/003235.html
On Wed, Aug 28, 2013 at 9:52 AM, KJ6KO <kj6ko@innercite.com> wrote:
** That explains a lot, except why it is even in the simpleusb.conf file in the first place.
I have heard that you can use usbradio.conf to drive the DMK URI but have never tried it. Will it work then or is it a DMK thing?
Thanks....
----- Original Message ----- *From:* Jeff Carrier <k0jsc.jeff@gmail.com> *To:* KJ6KO <kj6ko@innercite.com> *Cc:* app_rpt mailing list <App_rpt-users@ohnosec.org> *Sent:* Wednesday, August 28, 2013 8:28 AM *Subject:* Re: [App_rpt-users] RXONDELAY not working?
rxondelay only works with usbradio, it does not work with simpleusb.
73 de K0JSC
On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko@innercite.com> wrote:
** simpleusb.conf setting* rxondelay=x* to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay.
Anyone? Saw another identical post from 2011 and there was NO reply!
Thanks...
KJ6KO
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 8738 (20130828) __________
The message was checked by ESET NOD32 Antivirus.
participants (3)
-
Bryan D. Boyle -
Jeff Carrier -
KJ6KO