Dear Keith. Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do. Thank you for you help. Enviado desde mi iPhone El 30-11-2012, a las 13:58, Keith Goobie <keith@goobie.org> escribió:

Simplex is not a cable design issue. It is controlled from rpt.conf and usbradio.conf

Keith

Sent from my iPhone

On Nov 30, 2012, at 12:53 PM, David KE6UPI <dshaw@ke6upi.com> wrote:

...

Are you using one radio in simplex mode? If so you need a simplex cable. http://www.uricables.com/motorola.html

David

On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote:

...

Dear All.

I have installed ACID succesfully

I have the follows devices connected:

Motorola GM300 conected to my Asterisk (Centos)

http://www.dmkeng.com/URI_Order_Page.htm

http://www.uricables.com/DuplexMotorola.html (i have connected from RX Cable)

I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why.

http://allstarnode.com/viewtopic.php?f=5&t=67

When i try to do *98 i have not audio in radio base and mobiles radios (handy).

Does anyone tell me what is the best config for usbradio.conf and rpt.conf?

I hope anyone could help me or how i can do.

Fernando

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

Ok Keith. Thank You so much, i am trying to solve this issue from a long time (3 weeks). I can send the access root for my ACID installation and my MSN ID or Skype, if you want. Regards --- On Fri, 11/30/12, Keith Goobie <keith@goobie.org> wrote: From: Keith Goobie <keith@goobie.org> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt To: "Fernando Villarroel" <fvillarroel@yahoo.com> Cc: "David KE6UPI" <dshaw@ke6upi.com>, "APP RPT" <App_rpt-users@ohnosec.org> Date: Friday, November 30, 2012, 2:37 PM I am on iPhone right now.  Will do when I get home.  Keith Sent from my iPhone On Nov 30, 2012, at 2:20 PM, Fernando Villarroel <fvillarroel@yahoo.com> wrote: Dear Keith. Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do. Thank you for you help. Enviado desde mi iPhone El 30-11-2012, a las 13:58, Keith Goobie <keith@goobie.org> escribió: Simplex is not a cable design issue.  It is controlled from rpt.conf and usbradio.conf Keith Sent from my iPhone On Nov 30, 2012, at 12:53 PM, David KE6UPI <dshaw@ke6upi.com> wrote: Are you using one radio in simplex mode? If so you need a simplex cable. http://www.uricables.com/motorola.html David On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote: Dear All. I have installed ACID succesfully I have the follows devices connected: Motorola GM300 conected to my Asterisk (Centos) http://www.dmkeng.com/URI_Order_Page.htm http://www.uricables.com/DuplexMotorola.html (i have connected from RX Cable) I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not understand why. http://allstarnode.com/viewtopic.php?f=5&t=67 When i try to do *98 i have not audio in radio base and mobiles radios (handy). Does anyone tell me what is the best config for usbradio.conf and rpt.conf? I hope anyone could help me or how i can do. Fernando _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

Dear Matt. My ACID is a local installation. Yes, i did defined cop6 in rpt.conf I have not other nodes connected with this node (1999) The radio base (Motorola GM300) and mobiles radios (handys) can transmit very well between both. I can call from Zoiper and IAXrpt to Radio Base (1999) and i can doing the following commands: 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 0=autopatchdn ; Autopatch down 99=cop,4 ; Audio test tone 98=cop,6 ; Phone TX key But COP6 not works or i can't PTT from softphnes to handys. I can call from handy to PSTN and CellPhones. When i run the following commands Asterisk show me: test*CLI> radio tune rxnoise tune rxnoise maxtries=12, target=23000, tolerance=2750 tries=0, setting=2, meas=7323 tries=1, setting=6, meas=14436 tries=2, setting=10, meas=26213 tries=3, setting=9, meas=25173 tries=4, setting=9, meas=25229 tries=5, setting=9, meas=25107 tries=6, setting=9, meas=25344 DONE tries=6, setting=563, meas=25344, sqnoise=8140 INFO: RX INPUT ADJUST SUCCESS. test*CLI> radio tune rxvoice INFO: RX VOICE ADJUST START. target=7200 tolerance=360 tries=0, setting=1.000000, meas=17354 tries=1, setting=0.414890, meas=7179 tries=2, setting=0.416104, meas=7674 tries=3, setting=0.390402, meas=6842 tries=4, setting=0.390402, meas=6866 tries=5, setting=0.390402, meas=6956 DONE tries=5, setting=0.390402, meas=6956.000000 INFO: RX VOICE GAIN ADJUST SUCCESS. Regards. --- On Fri, 11/30/12, Matt Roberts <n9gmr@me.com> wrote:

From: Matt Roberts <n9gmr@me.com> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt To: "Fernando Villarroel" <fvillarroel@yahoo.com> Cc: "Keith Goobie" <keith@goobie.org>, "APP RPT" <App_rpt-users@ohnosec.org> Date: Friday, November 30, 2012, 4:59 PM

On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:

...

Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.

I don't think your configuration files are the issue themselves.  Does your node work? Can you transmit to your node, and when people transmit from other nodes can you hear them? Is cop6 defined in RPT.conf? Cop6 determines what command is used to activate PTT on the phone.  Has anyone tried connecting to your node from the portal on the phone and see if what is said is going out over your node?

Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860