Dear Matt. My ACID is a local installation. Yes, i did defined cop6 in rpt.conf I have not other nodes connected with this node (1999) The radio base (Motorola GM300) and mobiles radios (handys) can transmit very well between both. I can call from Zoiper and IAXrpt to Radio Base (1999) and i can doing the following commands: 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 0=autopatchdn ; Autopatch down 99=cop,4 ; Audio test tone 98=cop,6 ; Phone TX key But COP6 not works or i can't PTT from softphnes to handys. I can call from handy to PSTN and CellPhones. When i run the following commands Asterisk show me: test*CLI> radio tune rxnoise tune rxnoise maxtries=12, target=23000, tolerance=2750 tries=0, setting=2, meas=7323 tries=1, setting=6, meas=14436 tries=2, setting=10, meas=26213 tries=3, setting=9, meas=25173 tries=4, setting=9, meas=25229 tries=5, setting=9, meas=25107 tries=6, setting=9, meas=25344 DONE tries=6, setting=563, meas=25344, sqnoise=8140 INFO: RX INPUT ADJUST SUCCESS. test*CLI> radio tune rxvoice INFO: RX VOICE ADJUST START. target=7200 tolerance=360 tries=0, setting=1.000000, meas=17354 tries=1, setting=0.414890, meas=7179 tries=2, setting=0.416104, meas=7674 tries=3, setting=0.390402, meas=6842 tries=4, setting=0.390402, meas=6866 tries=5, setting=0.390402, meas=6956 DONE tries=5, setting=0.390402, meas=6956.000000 INFO: RX VOICE GAIN ADJUST SUCCESS. Regards. --- On Fri, 11/30/12, Matt Roberts <n9gmr@me.com> wrote:
From: Matt Roberts <n9gmr@me.com> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt To: "Fernando Villarroel" <fvillarroel@yahoo.com> Cc: "Keith Goobie" <keith@goobie.org>, "APP RPT" <App_rpt-users@ohnosec.org> Date: Friday, November 30, 2012, 4:59 PM
On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:
Do you could tell me a sample config for usbradio.conf and rpt.conf because i can't doing work, or how i can do.
I don't think your configuration files are the issue themselves. Does your node work? Can you transmit to your node, and when people transmit from other nodes can you hear them? Is cop6 defined in RPT.conf? Cop6 determines what command is used to activate PTT on the phone. Has anyone tried connecting to your node from the portal on the phone and see if what is said is going out over your node?
Matt Roberts n9gmr@me.com Call Sign N9GMR Allstar 28142 EchoLink 640860