We still have about ~200 nodes trying to register to the old server; please check your node and reboot it if it's not registering. Enabling dnsmgr will prevent this in the future and allow asterisk to failover to other servers. Please enable dnsmgr. We've tried to email most of these we can identify, but several have bounced back as the email on file is different. The vast majority of nodes (90%) came back up fine on Sunday, but we were having some serious issues with call number exhaustion from nodes which don't authenticate, and then hammer the server over and over again. Once you're out of call numbers on IAX, even valid nodes cannot authenticate. I think we've resolved this enough for now, there will be a better fix coming, but it's in test. As these are on a per IP basis, we didn't see this in testing as only about 200 hosts tested the cluster even though we had each host registering 100 nodes. The other unplanned event was nodes behind broken NAT. IAX requires a full cone nat to work and we tested with this, and everything worked. What was unplanned was when nat was broken, and Tim was able to come up with a fix to the nodes script for this. This script was completely rewritten and optimized with a 10 second cache, allowing us to generate it every 10 seconds across many servers. Previously the delta between the database and the nodes scripts was about 5 minutes, so this greatly speeds it up. If you look in /var/lib/asterisk/rpt-extnodes you'll see the cache info and which server generated it. Example: ;Generated 2574 records in 0.059 seconds. ;Served in 0.015 seconds. ;Served from cache: Yes ;Generated at 2018-08-14 13:01:26 UTC by register-ord.allstarlink.org In the above example there are 2574 nodes online, and it was served from cache by the Chicago server. The phone portal has been tweaked, and no longer reads back the invalid numbers at first call in. We've been doing much testing with it, and it's much much better as there are no longer 2900 nodes registering to it as well. I've yet to hear it stutter. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Bryan, I went and looked at the /var/lib/asterisk/rpt_extnodes file and it had nothing in it... Nada... And my main hub node keeps registering as 209.112.233.252:1127 when it SHOULD be 209.112.233.252:4571... I've got a few nodes registering like this... and the rpt_extnodes is a 1KB file dated 4/3/2015? Can you hand me a clue? Thanks! Bill - N5MBMwww.texasrepeaternetwork.net From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 8:17 AM Subject: [App_rpt-users] Update on registration We still have about ~200 nodes trying to register to the old server; please check your node and reboot it if it's not registering. Enabling dnsmgr will prevent this in the future and allow asterisk to failover to other servers. Please enable dnsmgr. We've tried to email most of these we can identify, but several have bounced back as the email on file is different. The vast majority of nodes (90%) came back up fine on Sunday, but we were having some serious issues with call number exhaustion from nodes which don't authenticate, and then hammer the server over and over again. Once you're out of call numbers on IAX, even valid nodes cannot authenticate. I think we've resolved this enough for now, there will be a better fix coming, but it's in test. As these are on a per IP basis, we didn't see this in testing as only about 200 hosts tested the cluster even though we had each host registering 100 nodes. The other unplanned event was nodes behind broken NAT. IAX requires a full cone nat to work and we tested with this, and everything worked. What was unplanned was when nat was broken, and Tim was able to come up with a fix to the nodes script for this. This script was completely rewritten and optimized with a 10 second cache, allowing us to generate it every 10 seconds across many servers. Previously the delta between the database and the nodes scripts was about 5 minutes, so this greatly speeds it up. If you look in /var/lib/asterisk/rpt-extnodes you'll see the cache info and which server generated it. Example: ;Generated 2574 records in 0.059 seconds. ;Served in 0.015 seconds. ;Served from cache: Yes ;Generated at 2018-08-14 13:01:26 UTC by register-ord.allstarlink.org In the above example there are 2574 nodes online, and it was served from cache by the Chicago server. The phone portal has been tweaked, and no longer reads back the invalid numbers at first call in. We've been doing much testing with it, and it's much much better as there are no longer 2900 nodes registering to it as well. I've yet to hear it stutter. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 8/14/18 9:31 AM, Mr. Possum (Bill) wrote:
I went and looked at the /var/lib/asterisk/rpt_extnodes file and it had nothing in it... Nada...
Is rc.updatenodelist running? It doesn't sound like it is. Restart it or reboot the node to get it running again.
And my main hub node keeps registering as 209.112.233.252:1127 when it SHOULD be 209.112.233.252:4571... I've got a few nodes registering like this... and the rpt_extnodes is a 1KB file dated 4/3/2015?
Below is everything i see for your IP address: 42413=radio@209.112.233.252:4572/42413,209.112.233.252 42414=radio@209.112.233.252:4573/42414,209.112.233.252 42466=radio@209.112.233.252:4573/42466,209.112.233.252 42471=radio@209.112.233.252:4574/42471,209.112.233.252 42817=radio@209.112.233.252:4571/42817,209.112.233.252 43033=radio@209.112.233.252:4571/43033,209.112.233.252 43034=radio@209.112.233.252:4571/43034,209.112.233.252 43035=radio@209.112.233.252:4572/43035,209.112.233.252 45634=radio@209.112.233.252:4571/45634,209.112.233.252 45635=radio@209.112.233.252:4576/45635,209.112.233.252,y 45636=radio@209.112.233.252:4576/45636,209.112.233.252,y 45638=radio@209.112.233.252:4576/45638,209.112.233.252 45644=radio@209.112.233.252:4575/45644,209.112.233.252 45645=radio@209.112.233.252:4574/45645,209.112.233.252 45646=radio@209.112.233.252:4575/45646,209.112.233.252 46902=radio@209.112.233.252:4580/46902,209.112.233.252 I don't see port 1127 on any of them. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Thanks Bryan, When I reboot my main hub node I still get the same stuff... [root@RP1 /]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 45634 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 42817 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43034 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43033 209.112.233.252:1127 60 Registered [root@RP1 /]# When I reboot my Navasota node I get - [root@Navasota AUTOSKY]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46904 50.27.185.134:1027 60 Registered 44.98.254.145:4569 Y 46901 50.27.185.134:1027 60 Auth. Sent [root@Navasota AUTOSKY]# How do I kick rc.updatenodelist in the butt? Thanks,Bill - N5MBM From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 8:54 AM Subject: Re: [App_rpt-users] Update on registration On 8/14/18 9:31 AM, Mr. Possum (Bill) wrote:
I went and looked at the /var/lib/asterisk/rpt_extnodes file and it had nothing in it... Nada...
Is rc.updatenodelist running? It doesn't sound like it is. Restart it or reboot the node to get it running again.
And my main hub node keeps registering as 209.112.233.252:1127 when it SHOULD be 209.112.233.252:4571... I've got a few nodes registering like this... and the rpt_extnodes is a 1KB file dated 4/3/2015?
Below is everything i see for your IP address: 42413=radio@209.112.233.252:4572/42413,209.112.233.252 42414=radio@209.112.233.252:4573/42414,209.112.233.252 42466=radio@209.112.233.252:4573/42466,209.112.233.252 42471=radio@209.112.233.252:4574/42471,209.112.233.252 42817=radio@209.112.233.252:4571/42817,209.112.233.252 43033=radio@209.112.233.252:4571/43033,209.112.233.252 43034=radio@209.112.233.252:4571/43034,209.112.233.252 43035=radio@209.112.233.252:4572/43035,209.112.233.252 45634=radio@209.112.233.252:4571/45634,209.112.233.252 45635=radio@209.112.233.252:4576/45635,209.112.233.252,y 45636=radio@209.112.233.252:4576/45636,209.112.233.252,y 45638=radio@209.112.233.252:4576/45638,209.112.233.252 45644=radio@209.112.233.252:4575/45644,209.112.233.252 45645=radio@209.112.233.252:4574/45645,209.112.233.252 45646=radio@209.112.233.252:4575/45646,209.112.233.252 46902=radio@209.112.233.252:4580/46902,209.112.233.252 I don't see port 1127 on any of them. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 8/14/18 10:06 AM, Mr. Possum (Bill) wrote:
Thanks Bryan, When I reboot my main hub node I still get the same stuff... [root@RP1 /]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 45634 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 42817 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43034 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43033 209.112.233.252:1127 60 Registered [root@RP1 /]# When I reboot my Navasota node I get -
[root@Navasota AUTOSKY]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46904 50.27.185.134:1027 60 Registered 44.98.254.145:4569 Y 46901 50.27.185.134:1027 60 Auth. Sent
Yea, it just means your NAT is not full cone. Your NAT box is not preserving the source port numbers of your node and the registration server is seeing you as 50.27.185.134 port 1027, rather than port 4569. You nodes are working just fine. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Thanks for that tidbit of info Bryan... And now that you mention it, BOTH of these addresses are behind Mikrotik routers... And I don't have a clue as to how to "fix" it. One belongs to me and the other to the site owner over in Navasota. Mikrotik's are strange animals, I am more used to conguring Cisco, Nortel and of course the old LinkSys routers... Bill - N5MBM From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 9:53 AM Subject: Re: [App_rpt-users] Update on registration On 8/14/18 10:06 AM, Mr. Possum (Bill) wrote:
Thanks Bryan, When I reboot my main hub node I still get the same stuff... [root@RP1 /]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 45634 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 42817 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43034 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43033 209.112.233.252:1127 60 Registered [root@RP1 /]# When I reboot my Navasota node I get -
[root@Navasota AUTOSKY]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46904 50.27.185.134:1027 60 Registered 44.98.254.145:4569 Y 46901 50.27.185.134:1027 60 Auth. Sent
Yea, it just means your NAT is not full cone. Your NAT box is not preserving the source port numbers of your node and the registration server is seeing you as 50.27.185.134 port 1027, rather than port 4569. You nodes are working just fine. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Bryan, On a semi-unrelated note... Do we have any idea when the bubble charts will start functioning properly again? I go to http://stats.allstarlink.org/getstatus.cgi?46682 and it says I am not connected to anything? That's my main HUB node that has a lot of connections... You can see them all at http://n5mbm.net:81/supermon/link.php?nodes=46682,45634,43033,29503,43773 Thanks! Bill - N5MBM From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 9:53 AM Subject: Re: [App_rpt-users] Update on registration On 8/14/18 10:06 AM, Mr. Possum (Bill) wrote:
Thanks Bryan, When I reboot my main hub node I still get the same stuff... [root@RP1 /]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 45634 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 42817 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43034 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43033 209.112.233.252:1127 60 Registered [root@RP1 /]# When I reboot my Navasota node I get -
[root@Navasota AUTOSKY]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46904 50.27.185.134:1027 60 Registered 44.98.254.145:4569 Y 46901 50.27.185.134:1027 60 Auth. Sent
Yea, it just means your NAT is not full cone. Your NAT box is not preserving the source port numbers of your node and the registration server is seeing you as 50.27.185.134 port 1027, rather than port 4569. You nodes are working just fine. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
It is working, your node isnt showing up for some reason. Can you check that its posting the http updates to http://stats.allstarlink.org/ ? -- Bryan Fields M: +1-727-409-1194
On Aug 14, 2018, at 12:25, Mr. Possum (Bill) <flatpossum1231@yahoo.com> wrote:
Bryan,
On a semi-unrelated note... Do we have any idea when the bubble charts will start functioning properly again?
I go to http://stats.allstarlink.org/getstatus.cgi?46682 and it says I am not connected to anything? That's my main HUB node that has a lot of connections... You can see them all at http://n5mbm.net:81/supermon/link.php?nodes=46682,45634,43033,29503,43773
Thanks!
Bill - N5MBM
From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 9:53 AM Subject: Re: [App_rpt-users] Update on registration
On 8/14/18 10:06 AM, Mr. Possum (Bill) wrote:
Thanks Bryan, When I reboot my main hub node I still get the same stuff... [root@RP1 /]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 45634 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 42817 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43034 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43033 209.112.233.252:1127 60 Registered [root@RP1 /]# When I reboot my Navasota node I get -
[root@Navasota AUTOSKY]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46904 50.27.185.134:1027 60 Registered 44.98.254.145:4569 Y 46901 50.27.185.134:1027 60 Auth. Sent
Yea, it just means your NAT is not full cone. Your NAT box is not preserving the source port numbers of your node and the registration server is seeing you as 50.27.185.134 port 1027, rather than port 4569.
You nodes are working just fine.
-- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I have three nodes at that particular remote repeater site - 45441 reports N/A for all the data, 46903 isn't showing up at all on the stats list and neither is the hub node 46682. When I scroll through the list at http://stats.allstarlink.org/ I find 45441 with no data and the others just don't show up at all... And I have the right statpost arguments in the rpt.conf file... ; *** Status Reporting *** statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates (scratches head) Uhhh... that oughta work right? :) Bill - N5MBM From: Bryan Fields <bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 11:29 AM Subject: Re: [App_rpt-users] Update on registration It is working, your node isnt showing up for some reason. Can you check that its posting the http updates to http://stats.allstarlink.org/ ? --Bryan FieldsM: +1-727-409-1194 On Aug 14, 2018, at 12:25, Mr. Possum (Bill) <flatpossum1231@yahoo.com> wrote: Bryan, On a semi-unrelated note... Do we have any idea when the bubble charts will start functioning properly again? I go to http://stats.allstarlink.org/getstatus.cgi?46682 and it says I am not connected to anything? That's my main HUB node that has a lot of connections... You can see them all at http://n5mbm.net:81/supermon/link.php?nodes=46682,45634,43033,29503,43773 Thanks! Bill - N5MBM From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 9:53 AM Subject: Re: [App_rpt-users] Update on registration On 8/14/18 10:06 AM, Mr. Possum (Bill) wrote:
Thanks Bryan, When I reboot my main hub node I still get the same stuff... [root@RP1 /]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 45634 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 42817 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43034 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43033 209.112.233.252:1127 60 Registered [root@RP1 /]# When I reboot my Navasota node I get -
[root@Navasota AUTOSKY]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46904 50.27.185.134:1027 60 Registered 44.98.254.145:4569 Y 46901 50.27.185.134:1027 60 Auth. Sent
Yea, it just means your NAT is not full cone. Your NAT box is not preserving the source port numbers of your node and the registration server is seeing you as 50.27.185.134 port 1027, rather than port 4569. You nodes are working just fine. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 8/14/18 12:41 PM, Mr. Possum (Bill) wrote:
I have three nodes at that particular remote repeater site - 45441 reports N/A for all the data, 46903 isn't showing up at all on the stats list and neither is the hub node 46682.
Bill, try it again. I actually found an issue with it, it was pulling the stats only for certain nodes, this was due to the db request not being pointed at the new db. Sorry for sending on a wild goose chase there, and many thanks for helping us troubleshoot it. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
AHA! So the fault did not lie in my set?!? LOL Thanks for fixing it! I think I am back to "normal" now... Bill - N5MBM From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 11:56 AM Subject: Re: [App_rpt-users] Update on registration On 8/14/18 12:41 PM, Mr. Possum (Bill) wrote:
I have three nodes at that particular remote repeater site - 45441 reports N/A for all the data, 46903 isn't showing up at all on the stats list and neither is the hub node 46682.
Bill, try it again. I actually found an issue with it, it was pulling the stats only for certain nodes, this was due to the db request not being pointed at the new db. Sorry for sending on a wild goose chase there, and many thanks for helping us troubleshoot it. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
HI Bryan, How does one go about enabling dnsmgr or at least verify it is running or not.... Thanks, Jeff -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Tuesday, August 14, 2018 09:17 To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] Update on registration We still have about ~200 nodes trying to register to the old server; please check your node and reboot it if it's not registering. Enabling dnsmgr will prevent this in the future and allow asterisk to failover to other servers. Please enable dnsmgr. We've tried to email most of these we can identify, but several have bounced back as the email on file is different. The vast majority of nodes (90%) came back up fine on Sunday, but we were having some serious issues with call number exhaustion from nodes which don't authenticate, and then hammer the server over and over again. Once you're out of call numbers on IAX, even valid nodes cannot authenticate. I think we've resolved this enough for now, there will be a better fix coming, but it's in test. As these are on a per IP basis, we didn't see this in testing as only about 200 hosts tested the cluster even though we had each host registering 100 nodes. The other unplanned event was nodes behind broken NAT. IAX requires a full cone nat to work and we tested with this, and everything worked. What was unplanned was when nat was broken, and Tim was able to come up with a fix to the nodes script for this. This script was completely rewritten and optimized with a 10 second cache, allowing us to generate it every 10 seconds across many servers. Previously the delta between the database and the nodes scripts was about 5 minutes, so this greatly speeds it up. If you look in /var/lib/asterisk/rpt-extnodes you'll see the cache info and which server generated it. Example: ;Generated 2574 records in 0.059 seconds. ;Served in 0.015 seconds. ;Served from cache: Yes ;Generated at 2018-08-14 13:01:26 UTC by register-ord.allstarlink.org In the above example there are 2574 nodes online, and it was served from cache by the Chicago server. The phone portal has been tweaked, and no longer reads back the invalid numbers at first call in. We've been doing much testing with it, and it's much much better as there are no longer 2900 nodes registering to it as well. I've yet to hear it stutter. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 8/14/18 9:44 AM, kc8qch@gmail.com wrote:
How does one go about enabling dnsmgr or at least verify it is running or not....
'iax2 show registry' Itchy*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 44233 44.98.249.6:4569 60 Registered 44.98.254.145:4569 Y 42032 44.98.249.6:4569 60 Registered 44.98.254.145:4569 Y 41618 44.98.249.6:4569 60 Registered 44.98.254.145:4569 Y 40821 44.98.249.6:4569 60 Registered If it says Y under dnsmgr, you're good. If it's an N, it's not running and it will not refresh DNS lookups until asterisk is restarted. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Oh duh! I knew that....thanks for the refresher...... Jeff -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bryan Fields Sent: Tuesday, August 14, 2018 09:49 To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Update on registration On 8/14/18 9:44 AM, kc8qch@gmail.com wrote:
How does one go about enabling dnsmgr or at least verify it is running or not....
'iax2 show registry' Itchy*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 44233 44.98.249.6:4569 60 Registered 44.98.254.145:4569 Y 42032 44.98.249.6:4569 60 Registered 44.98.254.145:4569 Y 41618 44.98.249.6:4569 60 Registered 44.98.254.145:4569 Y 40821 44.98.249.6:4569 60 Registered If it says Y under dnsmgr, you're good. If it's an N, it's not running and it will not refresh DNS lookups until asterisk is restarted. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bryan Fields -
Bryan Fields
-
kc8qch＠gmail.com -
Mr. Possum (Bill)