Thanks for that tidbit of info Bryan... And now that you mention it, BOTH of these addresses are behind Mikrotik routers... And I don't have a clue as to how to "fix" it. One belongs to me and the other to the site owner over in Navasota. Mikrotik's are strange animals, I am more used to conguring Cisco, Nortel and of course the old LinkSys routers... Bill - N5MBM From: Bryan Fields <Bryan@bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, August 14, 2018 9:53 AM Subject: Re: [App_rpt-users] Update on registration On 8/14/18 10:06 AM, Mr. Possum (Bill) wrote:
Thanks Bryan, When I reboot my main hub node I still get the same stuff... [root@RP1 /]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 45634 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 42817 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43034 209.112.233.252:1127 60 Registered 44.98.254.145:4569 Y 43033 209.112.233.252:1127 60 Registered [root@RP1 /]# When I reboot my Navasota node I get -
[root@Navasota AUTOSKY]# asterisk -rx "iax2 show registry" Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 46904 50.27.185.134:1027 60 Registered 44.98.254.145:4569 Y 46901 50.27.185.134:1027 60 Auth. Sent
Yea, it just means your NAT is not full cone. Your NAT box is not preserving the source port numbers of your node and the registration server is seeing you as 50.27.185.134 port 1027, rather than port 4569. You nodes are working just fine. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.