Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing? Eric (N7JYS) Marshall's Communications
What are you trying to do, exactly? Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops - provided your hang time is long enough. Many radios need more than 600 ms though - going more than 600 requires a small program mod and recompile. 73 Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Eric Harrison Sent: Wednesday, July 04, 2012 5:31 PM To: Allstar User Subject: [App_rpt-users] Tone Controll Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing? Eric (N7JYS) Marshall's Communications
Check out cop 58 and 59... Corey Dean. n3fe Mansfield, PA On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com<mailto:ke2n@cs.com>> wrote: What are you trying to do, exactly? Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops – provided your hang time is long enough. Many radios need more than 600 ms though – going more than 600 requires a small program mod and recompile. 73 Ken From: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Eric Harrison Sent: Wednesday, July 04, 2012 5:31 PM To: Allstar User Subject: [App_rpt-users] Tone Controll Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing? Eric (N7JYS) Marshall's Communications -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=776BF221E.A7330> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements. Matt Roberts n9gmr@me.com Sent from my iPhone On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net> wrote:
Check out cop 58 and 59...
Corey Dean. n3fe Mansfield, PA
On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com> wrote:
What are you trying to do, exactly? Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops – provided your hang time is long enough. Many radios need more than 600 ms though – going more than 600 requires a small program mod and recompile.
73 Ken
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Eric Harrison Sent: Wednesday, July 04, 2012 5:31 PM To: Allstar User Subject: [App_rpt-users] Tone Controll
Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing?
Eric (N7JYS)
Marshall's Communications
-- This message was scanned and is believed to be clean. Click here to report this message as spam. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
You *do* need the latest and greatest SVN update for this … From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Matt Roberts Sent: Thursday, July 05, 2012 8:57 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Tone Controll I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements. Matt Roberts n9gmr@me.com Sent from my iPhone On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net> wrote: Check out cop 58 and 59... Corey Dean. n3fe Mansfield, PA On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com> wrote: What are you trying to do, exactly? Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops – provided your hang time is long enough. Many radios need more than 600 ms though – going more than 600 requires a small program mod and recompile. 73 Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Eric Harrison Sent: Wednesday, July 04, 2012 5:31 PM To: Allstar User Subject: [App_rpt-users] Tone Controll Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing? Eric (N7JYS) Marshall's Communications -- This message was scanned and is believed to be clean. Click here to report this message as spam. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
You must have read my mind... or the internet was a little slow. But thanks, I will do an update and try it again tonight. Jon VA3RQ On 7/5/2012 10:19 AM, Ken wrote:
You **do** need the latest and greatest SVN update for this ...
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Matt Roberts *Sent:* Thursday, July 05, 2012 8:57 AM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Tone Controll
I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements.
Matt Roberts
n9gmr@me.com <mailto:n9gmr@me.com>
Sent from my iPhone
On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net <mailto:n3fe@repeater.net>> wrote:
Check out cop 58 and 59...
Corey Dean. n3fe
Mansfield, PA
On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com <mailto:ke2n@cs.com>> wrote:
What are you trying to do, exactly?
Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops -- provided your hang time is long enough.
Many radios need more than 600 ms though -- going more than 600 requires a small program mod and recompile.
73
Ken
*From:*app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] <mailto:[mailto:app_rpt-users-bounces@ohnosec.org]> *On Behalf Of *Eric Harrison *Sent:* Wednesday, July 04, 2012 5:31 PM *To:* Allstar User *Subject:* [App_rpt-users] Tone Controll
Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing?
Eric (N7JYS)
Marshall's Communications
-- This message was scanned and is believed to be clean. Click here to report this message as spam. <%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=776BF221E.A7330%0d%0a>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Does this only apply to ACID distro? Jon VA3RQ On 7/5/2012 10:19 AM, Ken wrote:
You **do** need the latest and greatest SVN update for this ...
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Matt Roberts *Sent:* Thursday, July 05, 2012 8:57 AM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Tone Controll
I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements.
Matt Roberts
n9gmr@me.com <mailto:n9gmr@me.com>
Sent from my iPhone
On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net <mailto:n3fe@repeater.net>> wrote:
Check out cop 58 and 59...
Corey Dean. n3fe
Mansfield, PA
On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com <mailto:ke2n@cs.com>> wrote:
What are you trying to do, exactly?
Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops -- provided your hang time is long enough.
Many radios need more than 600 ms though -- going more than 600 requires a small program mod and recompile.
73
Ken
*From:*app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] <mailto:[mailto:app_rpt-users-bounces@ohnosec.org]> *On Behalf Of *Eric Harrison *Sent:* Wednesday, July 04, 2012 5:31 PM *To:* Allstar User *Subject:* [App_rpt-users] Tone Controll
Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing?
Eric (N7JYS)
Marshall's Communications
-- This message was scanned and is believed to be clean. Click here to report this message as spam. <%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=776BF221E.A7330%0d%0a>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I Put them on my node 2417 and it seems to make no difference. When I send that command it said "TX PL ENA" but I still hear repeater tail and courtesy beeps. Is this supposed to only transmit the default PL tone only when a signal is coming in to the repeater? I have that node set up as a full duplex and dsp Squelch and pl decode and it also encodes PL too. Is it not supported on Version 0.281? Jon VA3RQ On 7/5/2012 8:57 AM, Matt Roberts wrote:
I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements.
Matt Roberts n9gmr@me.com <mailto:n9gmr@me.com>
Sent from my iPhone
On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net <mailto:n3fe@repeater.net>> wrote:
Check out cop 58 and 59...
Corey Dean. n3fe Mansfield, PA
On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com <mailto:ke2n@cs.com>> wrote:
What are you trying to do, exactly?
Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops -- provided your hang time is long enough.
Many radios need more than 600 ms though -- going more than 600 requires a small program mod and recompile.
73
Ken
*From:*app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Eric Harrison *Sent:* Wednesday, July 04, 2012 5:31 PM *To:* Allstar User *Subject:* [App_rpt-users] Tone Controll
Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing?
Eric (N7JYS)
Marshall's Communications
-- This message was scanned and is believed to be clean. Click here to report this message as spam. <%0Ahttp://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=776BF221E.A7330%0A>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Looks like it (at least the comment in the app_rpt.c file) appeared between versions 0.303 and 0.304 Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jon Rorke Sent: Thursday, July 05, 2012 10:22 AM Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Tone Controll I Put them on my node 2417 and it seems to make no difference. When I send that command it said "TX PL ENA" but I still hear repeater tail and courtesy beeps. Is this supposed to only transmit the default PL tone only when a signal is coming in to the repeater? I have that node set up as a full duplex and dsp Squelch and pl decode and it also encodes PL too. Is it not supported on Version 0.281? Jon VA3RQ On 7/5/2012 8:57 AM, Matt Roberts wrote: I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements. Matt Roberts n9gmr@me.com Sent from my iPhone On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net> wrote: Check out cop 58 and 59... Corey Dean. n3fe Mansfield, PA On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com> wrote: What are you trying to do, exactly? Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops - provided your hang time is long enough. Many radios need more than 600 ms though - going more than 600 requires a small program mod and recompile. 73 Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Eric Harrison Sent: Wednesday, July 04, 2012 5:31 PM To: Allstar User Subject: [App_rpt-users] Tone Controll Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing? Eric (N7JYS) Marshall's Communications -- This message was scanned and is believed to be clean. Click here to report this message as spam. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
OK I updated my node to 0.306 and using the cop 58 & 59 works great! Thanks for the info. A new option to play with. Jon RQ On 7/5/2012 1:11 PM, Ken wrote:
Looks like it (at least the comment in the app_rpt.c file) appeared between versions 0.303 and 0.304
Ken
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Jon Rorke *Sent:* Thursday, July 05, 2012 10:22 AM *Cc:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Tone Controll
I Put them on my node 2417 and it seems to make no difference.
When I send that command it said "TX PL ENA" but I still hear repeater tail and courtesy beeps. Is this supposed to only transmit the default PL tone only when a signal is coming in to the repeater?
I have that node set up as a full duplex and dsp Squelch and pl decode and it also encodes PL too.
Is it not supported on Version 0.281?
Jon VA3RQ
On 7/5/2012 8:57 AM, Matt Roberts wrote:
I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements.
Matt Roberts
n9gmr@me.com <mailto:n9gmr@me.com>
Sent from my iPhone
On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net <mailto:n3fe@repeater.net>> wrote:
Check out cop 58 and 59...
Corey Dean. n3fe
Mansfield, PA
On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com <mailto:ke2n@cs.com>> wrote:
What are you trying to do, exactly?
Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops -- provided your hang time is long enough.
Many radios need more than 600 ms though -- going more than 600 requires a small program mod and recompile.
73
Ken
*From:*app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Eric Harrison *Sent:* Wednesday, July 04, 2012 5:31 PM *To:* Allstar User *Subject:* [App_rpt-users] Tone Controll
Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing?
Eric (N7JYS)
Marshall's Communications
-- This message was scanned and is believed to be clean. Click here to report this message as spam. <%0Ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=776BF221E.A7330%0A>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>
participants (5)
-
Corey Dean -
Eric Harrison -
Jon Rorke -
Ken -
Matt Roberts