OK I updated my node to 0.306 and using the cop 58 & 59 works great! Thanks for the info. A new option to play with. Jon RQ On 7/5/2012 1:11 PM, Ken wrote:
Looks like it (at least the comment in the app_rpt.c file) appeared between versions 0.303 and 0.304
Ken
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Jon Rorke *Sent:* Thursday, July 05, 2012 10:22 AM *Cc:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Tone Controll
I Put them on my node 2417 and it seems to make no difference.
When I send that command it said "TX PL ENA" but I still hear repeater tail and courtesy beeps. Is this supposed to only transmit the default PL tone only when a signal is coming in to the repeater?
I have that node set up as a full duplex and dsp Squelch and pl decode and it also encodes PL too.
Is it not supported on Version 0.281?
Jon VA3RQ
On 7/5/2012 8:57 AM, Matt Roberts wrote:
I have those commands on my system as DTMF commands. With TXIPLENA enabled, you won't hear telemetry announcements.
Matt Roberts
n9gmr@me.com <mailto:n9gmr@me.com>
Sent from my iPhone
On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe@repeater.net <mailto:n3fe@repeater.net>> wrote:
Check out cop 58 and 59...
Corey Dean. n3fe
Mansfield, PA
On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n@cs.com <mailto:ke2n@cs.com>> wrote:
What are you trying to do, exactly?
Notone will stop transmitting the CTCSS tone 600 ms before the carrier drops -- provided your hang time is long enough.
Many radios need more than 600 ms though -- going more than 600 requires a small program mod and recompile.
73
Ken
*From:*app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Eric Harrison *Sent:* Wednesday, July 04, 2012 5:31 PM *To:* Allstar User *Subject:* [App_rpt-users] Tone Controll
Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing?
Eric (N7JYS)
Marshall's Communications
-- This message was scanned and is believed to be clean. Click here to report this message as spam. <%0Ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=776BF221E.A7330%0A>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>